ページ1に含まれる内容の要旨
Installation
H
H
Washer-Extractors
Cabinet Freestanding
Refer to Page 2 for Model Identification
CFD14C
18 and 30 Models CFD14C
CFD16C
33 and 40 Models
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
Part No. 9001909R4
www.comlaundry.com December 2009
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Introduction......................................................................................... 2 Table of Model Identification ............................................................................. 2 Nameplate Location.............................................................................. 3 Contents Replacement Parts ................................................................................ 3 Customer Service............................................................
ページ4に含まれる内容の要旨
Introduction Model Identification Information in this manual is applicable to these models: NX18BVPA6 NX18BVXA6 SX18BVPA7 NX18BVPA7 NX18BVXA7 SX18BVQA7 18 NX18BVQA6 NX18BVXM6 SX18BVXA7 NX18BVQA7 NX18BVXM7 SX18BVXM7 NX30BVPA6 NX30BVXA6 SX30BVPA7 NX30BVPA7 NX30BVXA7 SX30BVQA7 30 NX30BVQA6 NX30BVXM6 SX30BVXA7 NX30BVQA7 NX30BVXM7 SX30BVXM7 SX33BVPA7 SX33BVQA7 33 SX33BVXA7 SX33BVXM7 SX40BVPA7 SX40BVQA7 40 SX40BVXA7 SX40BVXM7 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001909
ページ5に含まれる内容の要旨
H H Introduction Nameplate Location The nameplate is located at the rear of the machine. Always provide the machine’s serial number and model number when ordering parts or when seeking technical assistance. Refer to Figure 1 and Figure 2. 1 1 CFD14C CFD16C CFD14C CFD16C 18 AND 30 MODELS 33 AND 40 MODELS 1 Nameplate Figure 1 Replacement Parts If literature or replacement parts are required, contact the source from which the machine was purchased or contact Alliance Laundry Systems at (920)
ページ6に含まれる内容の要旨
Introduction Model Number Familiarization Guide Sample Model Number: NX18BVXM60001 Model Number Prefix NX Washer-Extractor Capacity (pounds dry weight of laundry) 18 Type of Electrical Control B Washer-Extractor Speed Capability (V = Variable-Speed) V Voltage Code X Design Series (M=Domestic, A=International) M6 Option Identification (varies from machine to machine) 0001 NX18BVXM60001 6 15 50 60 2/3+PE 1 1000 18 8 EXAMPLE OF NAMEPLATE CFD22N CFD22N Figure 2 © Copyright, Alliance Laundry System
ページ7に含まれる内容の要旨
Safety Information Explanation of Safety Messages Important Safety Instructions Precautionary statements (“DANGER,” “WARNING,” WARNING and “CAUTION”), followed by specific instructions, are found in this manual and on machine decals. These To reduce the risk of fire, electric shock, precautions are intended for the personal safety of the serious injury or death to persons when operator, user, servicer, and those maintaining the using your washer, follow these basic machine. precautions:
ページ8に含まれる内容の要旨
Safety Information 9. Do not install or store the washer where it will be 20. If the supply cord is damaged, it must be replaced exposed to water and/or weather. by a special cord or assembly available from the manufacturer or its service agent. 10. Do not tamper with the controls. 21. Be sure water connections have a shut-off valve 11. Do not repair or replace any part of the washer, or and that fill hose connections are tight. CLOSE attempt any servicing unless specifically the shut-off
ページ9に含まれる内容の要旨
Safety Information WARNING CAUTION This machine must be installed, adjusted, Be careful around the open door, and serviced by qualified electrical particularly when loading from a level maintenance personnel familiar with the below the door. Impact with door edges construction and operation of this type of can cause personal injury. SW025 machinery. They must also be familiar with the potential hazards involved. Failure to observe this warning may result in personal injury and/or equipment
ページ10に含まれる内容の要旨
Safety Information Do not bypass any safety devices in the machine. Operator Safety WARNING WARNING NEVER insert hands or objects into Never operate the machine with a basket until it has completely stopped. bypassed or disconnected balance Doing so could result in serious injury. system. Operating the machine with SW012 severe out-of-balance loads could result in personal injury and serious equipment To ensure the safety of machine operators, the damage. following maintenance checks mus
ページ11に含まれる内容の要旨
Specifications and Dimensions General Specifications Model 18303340 Overall Dimensions Overall width 26 in. 30.7 in. 30.7 in. 30.7 in. (660 mm) (780 mm) (780 mm) (780 mm) Overall height 40.9 in. 47.3 in. 54.15 in. 54.15 in. (1038 mm) (1202 mm) (1376 mm) (1376 mm) Overall depth 29.1 in. 33.1 in. 33.07 in. 37.01 in. (739 mm) (842 mm) (840 mm) (940 mm) Weight and Shipping Information Net weight 465.2 lb. 716.5 lb. 811.30 lb. 862.01 lb. (211 kg) (325 kg) (368 kg) (391 kg) Shipping weight 513.7 lb
ページ12に含まれる内容の要旨
Specifications and Dimensions General Specifications Model 18 303340 Drive Train Information Number of motors in drive train 1 1 1 1 Drive motor power 1 HP 2 HP 2.95 HP 2.95 HP (0.75 kW) (1.5 kW) (2.2 kW) (2.2 kW) Cylinder Speeds Wash/reverse speed 10-50 RPM 10-50 RPM 10-50 RPM 10-50 RPM Distribution/drain speed 85 RPM 85 RPM 85 RPM 85 RPM Extract speed 250-1000 RPM 250-1000 RPM 250-1000 RPM 250-1000 RPM Centrifugal Force Data Wash/reverse centrifugal force 0.03-0.74 Gs 0.04-0.91 Gs 0.37-0.94 G
ページ13に含まれる内容の要旨
Specifications and Dimensions 8.7 in. (220 mm) H 40.9 in. (1038 mm) 39.8 in. (1011 mm) 14.4 in. (365 mm) 20.9 in. 2.6 in. 2.6 in. (530 mm) (65 mm) (65 mm) 26 in. 26.3 in. (670 mm) (660 mm) 2.7 in. 28.6 in. (727 mm) (69 mm) 9.1 in. 7.2 in. (231 mm) 6 in. (184 mm) (153 mm) 3 in. 5.5 in. 1 (75 mm) (139 mm) 8 2 3 33.2 in. 4 (843 mm) 7 6 31.9 in. (809 mm) 7 in. (180 mm) 27.7 in. (633 mm) 5 2.8 in. 26 in. (70 mm) (660 mm) 18 MODEL CFD519N CFD519N 1 Hot Water Connections .75 in. (19 mm) 5 Drain Outlet
ページ14に含まれる内容の要旨
Specifications and Dimensions 8.7 in. (220 mm) 3.5 in. (88 mm) H 474 in. (1202 mm) 46.3 in. (1175 mm) 18.7 in. (475 mm) 25.5 in. 2.6 in. 2.6 in. (648 mm) (66 mm) (66 mm) 30.7 in. 29.9 in. (760 mm) (780 mm) 3.2 in. 32.1 in. (816 mm) 13.1 in. (82 mm) (332 mm) 10.5 in. (267 mm) 7.9 in. 8 in. (200 mm) 1 (202 mm) 2 6.1 in. (155 mm) 8 3 4 7 5 36.4 in. (924 mm) 1.4 in. 38 in. (35 mm) (964 mm) 7.9 in. (200 mm) 33.5 in. (849 mm) 2.8 in. (70 mm) CFD520N 6 30 MODEL CFD520N 1 Hot Water Connections .75 in. (
ページ15に含まれる内容の要旨
Specifications and Dimensions 3.47 in. 8.66 in. (88 mm) (220 mm) H 26.77 in. (680 mm) 1.97 in. 1.97 in. 1.34 in. 26.18 in. (665 mm) 1.34 in. (50 mm) (50 mm) 30.71 in. (780 mm) (34 mm) (34 mm) 28.86 in. (733 mm) CFD537N CFD540N 3.41 in. 29.65 in. (753 mm) CFD538N 13.05 in. (332 mm) CFD538N (86.5 mm) 10.49 in. (267 mm) 7.93 in. (202 mm) 1 4.13 in. (105 mm) 4 2 3 5 6 7 8 4.3 in. (109 mm) 1.38 in. (35 mm) 9 6.69 in. (170 mm) CFD539N CFD539N 33 MODEL 1 Fill and Supply Ventilation 6 Connection Cl
ページ16に含まれる内容の要旨
Specifications and Dimensions 3.47 in. 8.66 in. (88 mm) (220 mm) H 26.77 in. (680 mm) 1.97 in. 1.97 in. 1.34 in. 30.12 in. (765 mm) 1.34 in. (50 mm) (50 mm) 30.71 in. (780 mm) (34 mm) (34 mm) 32.8 in. (833 mm) CFD537N CFD540N 3.41 in. 33.58 in. (853 mm) CFD538N 13.05 in. (332 mm) CFD538N (86.5 mm) 10.49 in. (267 mm) 7.93 in. (202 mm) 1 4.13 in. (105 mm) 4 2 3 5 6 7 8 4.3 in. (109 mm) 1.38 in. (35 mm) 9 6.69 in. (170 mm) CFD539N CFD539N 40 MODEL 1 Fill and Supply Ventilation 6 Connection Cla
ページ17に含まれる内容の要旨
Installation Dimensional Clearances Machine Foundation Table 1 shows recommended minimum clearances on Thoroughness of detail must be stressed with all all sides of the washer-extractor. foundation work to ensure a stable unit installation, eliminating possibilities of excessive vibration during extract. Recommended Minimum Clearances 40 Model 18 30 33 CAUTION Minimum rear 24 in. 24 in. 24 in. 24 in. Ensure that the machine is installed on a clearance (600 mm) (600 mm) (600 mm) (600 mm) leve
ページ18に含まれる内容の要旨
Installation Mechanical Installation Frame Dimensions and Mounting Bolt Location 1.18 in. (30 mm) 0.74 in. (18 mm) 1.18 in. (30 mm) 2.26 in. 2.26 in. 20.87 in. (65 mm) (65 mm) (530 mm) 25.98 in. (660 mm) 18 MODEL CFD67N Figure 7 IMPORTANT: Drawing is not to scale. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001909 16 23.23 in. (590 mm) 25.59 in. (690 mm)
ページ19に含まれる内容の要旨
Installation 1.44 in. (36.5 mm) 0.71 in. (18 mm) 1.44 in. (36.5 mm) 25.51 in. 2.60 in. 2.60 in. (648 mm) (66 mm) (66 mm) 30.71 in. (780 mm) 30 MODEL CFD68N Figure 8 IMPORTANT: Drawing is not to scale. 9001909 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 17 26.18 in. (665 mm) 29.06 in. (738 mm)
ページ20に含まれる内容の要旨
Installation 1.34 in. (34 mm) .87 in. (22 mm) 1.34 in. (34 mm) 26.77 in. 1.97 in. 1.97 in. (680 mm) (50 mm) (50 mm) 30.71 in. (780 mm) CFD541N 33 MODEL CFD541N Figure 9 IMPORTANT: Drawing is not to scale. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001909 18 26.18 in. (665 mm) 28.86 in. (733 mm)
