ページ1に含まれる内容の要旨
LAVAMAT 61900/60900
Washing machine
User information
ページ2に含まれる内容の要旨
Dear customer, Please read this User Information carefully and keep it to refer to at a later date. Pass this User Information on to any subsequent owner of the appli- ance. The following symbols are used in the text: 1 Safety instructions Warning: Notes that concern your personal safety. Attention: Notes that show how to avoid damage to the appliance. 3 Useful tips and hints 2 Environmental information 2
ページ3に含まれる内容の要旨
Contents Operating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Description of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Programme overview . . . . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
Installation and connection instructions. . . . . . . . . . . . . . . . . 26 Safety information for the installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Installing the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Transporting the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Unpacking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ5に含まれる内容の要旨
Operating Instructions 1 Safety Prior to using for the first time • Follow the ”Instructions for installation and connection”. � If the appliance is delivered in the winter months when there are mi- nus temperatures: Store the washing machine at room temperature for 24 hours before using for the first time. Correct use � The washing machine is only designed for the washing of normal do- mestic laundry at home. � Additions or modifications to the washing machine are not permit- ted. � Use only
ページ6に含まれる内容の要旨
General safety � Repairs to the washing machine must only be carried out by qualified service engineers. � Never use the washing machine if the mains cable is damaged; or if the control panel, work top or plinth area is damaged such that the inside of the appliance is freely accessible. � Switch off the washing machine before cleaning, maintenance and servicing. In addition, pull the mains plug out of the socket or – in the case of a permanent connection – switch off the cut-out in the fu
ページ7に含まれる内容の要旨
Description of the appliance Detergent dispenser Control panel drawer Rating plate (behind door) Plinth flap/ Screw feet Drain pump (height adjustable) Control panel SPIN/RINSE HOLD button Multidisplay DELAY TIMER button Programme Progress display Programme option DOOR indicator Programme knob buttons START/PAUSE button 7
ページ8に含まれる内容の要旨
Programme overview Programme options Spin speed Programme 2) ECO (ENERGY SAVING) 6kg � � � � � � (COTTONS/LINEN) 3) 4) 6kg � � � � � � � 95, 60, 50, 40, 30 (EASY-CARES) 4) 3kg � � � � � � 60, 50, 40, 30 l (EASY IRON) 40 1kg � � � � � � (DELICATES) 3kg � � � � � 40, 30 / / (WOOL/SILK/HANDWASH) 2kg � � 40, 30, X (COLD) (GENTLE RINSE) 3kg � � (DRAIN) (SPIN) 6kg � � a (REFRESH) 3kg � � 1) A 10 litre bucket contains approx. 2.5 kg of dry washing (cotton) 2) Programme settings for tests in acco
ページ9に含まれる内容の要旨
1) Application/features: Care symbols Energy-saving programme at 60 °C for lightly to normally soiled whites/ M O coloureds made of cotton/linen. Programme for normally to heavily soiled whites/coloureds made of cotton/ J M O linen. I K N Programme for easy-care mixed fibres and synthetics. Special programme which washes at 40 °C for easy-care fabrics which after K N being washed using this programme need to be ironed only lightly or not at all. Gentle programme for delicate fabrics such a
ページ10に含まれる内容の要旨
Before the first wash 1. Open the detergent dispenser drawer. 2. Pour about 2 litres of water through the detergent dispenser drawer into the washing machine. This closes the water container when the next programme is started and the economy valve can function properly. 3. In order to remove any residues from the drum and water container which may have been left during manufacturing, perform the first wash cycle without any washing in the machine. Programme: (COTTONS/LINEN) 95, press ] (Q
ページ11に含まれる内容の要旨
Running a washing cycle Opening the door/Loading the washing 1. To open the door: gently pull the handle on the door. When the machine is switched on, the lights (DOOR) and (START/PAUSE) indicate whether the door can be opened: light (DOOR) light (START/PAUSE) Can the door be opened? lit green flashes red or is off yes yes, after pressing the lit green lit red (START/PAUSE) button lit red flashes red no, water level too high or or is off or lit red temperature too high 2. Unfold washing a
ページ12に含まれる内容の要旨
Dosing depends upon: – the washing’s degree of soiling, – the size of the load – the degree of hardness of the water supply. � If the manufacturer does not give instructions for small loads: for a half load, use a third less, for a very small load, use only half of the detergent that is recommended for a full load. � From water hardness 2 (= medium) upwards, water softener should be used. Detergent can then always be dosed for water hardness 1 (= soft). Your local water company will be able
ページ13に含まれる内容の要旨
Switching on the appliance/selecting a programme Set the programme and tempera- ture using the programme knob. 3 By selecting a programme, you switch the appliance on at the same time. – The programme progress display indicates the programme steps that the selected programme will perform. – In the multi-display the estimated length of the programme (in minutes) appears. Changing the spin speed/Selecting rinse hold The washing machine suggests the maximum permitted speed that is suitable
ページ14に含まれる内容の要旨
Selecting the programme options If desired, press the programme op- tion button(s). The corresponding indicator lights up. 3 If “Err” is flashing in the multi- display, the programme option se- lected cannot be combined with the wash programme set. EXTRA RINSE With the programmes ECO (ENERGY SAVING), (COTTONS/LINEN), (DELICATES), (EASY-CARES) and l (EASY IRON) two addi- tional rinses are carried out (e. g. in cases of over-sensitive skin). QUICK WASH Shortened wash programme for less soi
ページ15に含まれる内容の要旨
3 If the display is showing 23h and you press the button again, the time delay will be cancelled. 0' will appear followed by the length of the wash programme that has been set. 3.To activate the delay timer, press the button (START/PAUSE). The time remaining to the start of the programme is continuously displayed (e. g., 12h, 11h, 10h,... 30' etc.). Starting a programme 1. Check that the tap is turned on. 2.Press the button (START/PAUSE). The programme is started or it starts after the ti
ページ16に含まれる内容の要旨
Interrupting a programme/Adding washing Interrupting a programme � A washing programme can be interrupted at any time by pressing the button (START/PAUSE) and then re-started by pressing the button (START/PAUSE) again. � To stop the washing machine before the programme has ended, turn the programme knob to (OFF). Important: Be careful if there is water in the appliance! Adding washing It is possible to add washing, as long as the (DOOR) light is lit green. 1.Press the button (START/PAUS
ページ17に含まれる内容の要旨
Child safety device When the child safety device is set, the door can no longer be closed. Setting the child safety device: Use a coin to turn the knob (on the inside of the door) in a clockwise di- rection as far as it will go. 1 Warning! The knob must not be sunk-in after being set, otherwise the child safety device is not active. The knob must stand out as shown in the illustration. Releasing the child safety device: Turn the knob anti-clockwise as far as it will go. Cleaning and ma
ページ18に含まれる内容の要旨
Detergent dispenser drawer The detergent dispenser drawer should be cleaned regularly. 1.Remove the detergent dispenser drawer by pulling it firmly. 2.Remove the conditioner insert from the middle compartment. 3.Clean all parts with water. 4. Put the conditioner insert in as far as it will go, so that it is firmly in place. 5.Clean all parts of the washing ma- chine, especially the nozzles in the top of the washing-in chamber, with a brush. 6. Insert the detergent dispenser draw- er in the
ページ19に含まれる内容の要旨
What to do if... Remedying small malfunctions If during use of the appliance one of the following error codes is shown in the multi-display: –E10 (Problems with water inflow), –E20 (Problems with water outflow), –E40 (door open), please have a look at the following table. When the fault is remedied, press the button (START/PAUSE). In the event of other errors (E and a number or letter): Switch the ap- pliance off and then on again. Re-set the programme. Press the button (START/PAUSE). If th
ページ20に含まれる内容の要旨
Problem Possible cause Remedy The transport lock has not Removing the transport lock. been removed. The washing machine vibrates when operating Adjust the feet as described The screw feet not correctly or is not stable. in the installation and con- adjusted. nection instructions. Always load the drum as full Washing has not been Only a few large items of as possible. Mix large and spun. washing in the drum. small items. Screw connection on the in- Screw the inlet hose on let hose is lea
