ページ1に含まれる内容の要旨
Lever Chain Hoist
Item 67144 – 1/4 Ton
Item 96482 – 3/4 Ton
Item 66106 – 1-1/2 Ton
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
When unpacking, make sure that the product is intact and undamaged.
If any parts are missing or broken, please call 1-800-444-3353 as soon as possible.
Visit our website at: http://www.harborfreight.com
© ®
Copyright 2008 by Harbor Freight Tools . All rights reserved. No portion of this manual or
ページ2に含まれる内容の要旨
Specifications CAUTION, used with the safety alert symbol, indicates a hazardous situation 67144: 1/4 Ton (500 lb.) which, if not avoided, could result Rated 96482: 3/4 Ton (1,500 lb.) in minor or moderate injury. Capacity 66106: 1-1/2 Tons (3,000 lb.) Lift Height 5 Feet NOTICE is used to address practices not related to personal injury. Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, CAUTION, without the safety alert symbol,
ページ3に含まれる内容の要旨
2. Personal safety Sudden load movement may briefly create excess load causing product failure. a. Stay alert, watch what you are doing Do not jostle or twist a suspended load, and use common sense when using move item to the work area, lower and a tool. Do not use tools while you are release the Hoist before beginning work. tired or under the influence of drugs, alcohol or medication. A moment of d. Do not use the Hoist to lift inattention while operating a tool may a person or anima
ページ4に含まれる内容の要旨
WARNING! Verify that the load weighs 67144 – 1/4 Ton less than the capacity of your Hoist model, as listed in the Specifications chart. Operating Instructions Attachment point must be rated to support the combined weight of hoist and load. Read the ENTIRE IMPORTANT 1. Attach the Hoist to the connection SAFETY INFORMATION section at the point by sliding the Top Hook onto it. beginning of this manual including The Top Hook must fit the connection point all text under subheadings there
ページ5に含まれる内容の要旨
4. Move the Selector Lever to the up position 6. If the load is to be moved, lower it close to the (see Figure D) and ratchet the ground prior to attempting to relocate the load. Lever Handle to lift the load. Do not touch the Selector Lever until the load is ready to be lowered. 7. To lower the load, turn the Selector Lever to the down position (see Figure E) and ratchet until the load is resting fully on the work area. Figure D: 67144 Selector Lever Up Position Note: If there is slack
ページ6に含まれる内容の要旨
WARNING! Verify that the load weighs 96482 – 3/4 Ton and less than the capacity of your Hoist model, as listed in the Specifications chart. 66106 – 1-1/2 Ton Attachment point must be rated to support Operating Instructions the combined weight of hoist and load. 1. Attach the Hoist to the connection Read the ENTIRE IMPORTANT point by sliding the Top Hook onto it. SAFETY INFORMATION section at the The Top Hook must fit the connection point beginning of this manual including secure
ページ7に含まれる内容の要旨
5. WARNING! Turn the Brake Knob 9. To lower the load, turn the Selector Lever to clockwise until it stops before the down position (see Figure I) and ratchet lifting or lowering a load. until the load is resting fully on the work area. WARNING! DO NOT LOWER BY TURNING 6. Move the Selector Lever to the up position BRAKE KNOB OR LOAD WILL FALL. (see Figure H) and ratchet the Lever Handle to lift the load. Turn Brake Knob clockwise to engage brake D U N 1 / 1 2 TON LEVER CHAIN HOIST ITEM 661
ページ8に含まれる内容の要旨
PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS
ページ9に含まれる内容の要旨
67144 Assembly Diagram IMPORTANT: When ordering parts, specify which SKU the parts are for. Lever Chain Hoist For technical questions, please call 1-800-444-3353. Page 9
ページ10に含まれる内容の要旨
66106 and 96482 Parts List IMPORTANT: When ordering parts, specify which SKU the parts are for. Part Description Qty Part Description Qty 1 Brake Knob 1 22 Gear Disk B 1 2 Screw 2 23 Driving Shaft 1 3 Spring Washer 2 24 Splined Gear 1 4 Lever Handle 1 25 Guide Roller 2 5 Selector Wheel 1 26 Chain Stripper 1 6 Handle Case 1 27 Chain 1 7 Thread Disk 1 28 Load Hook 1 8 Brake Disc 2 29 Chain Pin 1 9 Ratchet Disk 1 30 Snap Ring 2 10 Brake Spring 1 31 Brake Seat 1 11 Side Plate A 1 32 Pawl Spring 2
ページ11に含まれる内容の要旨
66106 and 96482 Assembly Diagram IMPORTANT: When ordering parts, specify which SKU the parts are for. Lever Chain Hoist For technical questions, please call 1-800-444-3353. Page 11
ページ12に含まれる内容の要旨
To take advantage of this warranty, the Limited 90 Day Warranty product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the Harbor Freight Tools Co. makes every effort complaint must accompany the merchandise. If to assure that its products meet high quality our inspection verifies the defect, we will either and durability standards, and warrants to the repair or replace the product at our election or original purchaser t
