ページ1に含まれる内容の要旨
DIGITAL VIDEO CAMERA
GR-DVL9000
Please visit our CyberCam Homepage on
the World Wide Web and answer our
Consumer Survey (in English only):
http://www.jvc-victor.co.jp/index-e.html
For Customer Use:
Enter below the Model No. and Serial
No. which is located on the bottom of
cabinet. Retain this information for
INSTRUCTIONS
future reference.
Model No.
Serial No.
LYT0164-001A
ページ2に含まれる内容の要旨
2 EN Dear Customer, IMPORTANT: Thank you for purchasing this Digital Video n Never use any AC Power Adapter/Battery Camera. Before use, please read the safety Charger other than the one provided with this information and precautions contained in the camcorder. following pages to ensure safe use of this product. n If you lose the provided AC Power Adapter/ Battery Charger or if it malfunctions, please consult your nearest JVC service dealer. Using This Instruction Manual • All major sections and
ページ3に含まれる内容の要旨
EN 3 5. Ventilation IMPORTANT PRODUCT Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product SAFETY INSTRUCTIONS and to protect it from overheating, these openings must not be blocked or covered. Electrical energy can perform many useful functions. •Do not block the openings by placing the product on But improper use can result in potential electrical shock a bed, sofa, rug or other similar surface. or fire hazards. This product has been engin
ページ4に含まれる内容の要旨
4 EN USE SERVICING 1. Accessories 1. Servicing To avoid personal injury: If your product is not operating correctly or exhibits a • Do not place this product on an unstable cart, stand, marked change in performance and you are unable to tripod, bracket or table. It may fall, causing serious restore normal operation by following the detailed injury to a child or adult, and serious damage to the procedure in its operating instructions, do not attempt product. to service it yourself as opening or r
ページ5に含まれる内容の要旨
EN 5 About Batteries SAFETY PRECAUTIONS DANGER! Do not attempt to take the batteries Do not point the lens or the viewfinder directly into apart, or expose them to flame or excessive heat, as the sun. This can cause eye injuries, as well as lead there is a risk of fire or explosion. to the malfunctioning of internal circuitry. There is WARNING! Do not allow the battery terminals, or also a risk of fire or electric shock. the battery itself, to come in contact with metals, as this can result in a
ページ6に含まれる内容の要旨
PROVIDED ACCESSORIES 6 EN TW AC Power Remote control unit Adapter/Charger AA-V80U RM-V711U MiniDV Cassette Tape 30 min Battery pack BN-V814U (DVM-30) M-DV30ME Lithium battery CR2025 for Shoulder Strap remote control unit Editing cable VIDEO/AUDIO cable (ø 3.5 mini-plug, 2 poles) (camcorder to TV or VCR, ø 3.5 mini-plug 4 RCA plug)
ページ7に含まれる内容の要旨
EN 7 S-VIDEO cable DC cord Cleaning cloth CD-ROM The CD ROM contains the following 3 software programs: •JLIP Video Capture •JLIP Video Producer •MGI PhotoSuite SE JLIP-PC connection cable
ページ8に含まれる内容の要旨
ABOUT DV 8 EN The digital video camera converts incoming audio and video signals into digital form for recording. A video signal is composed of a luminance signal (Y) and color signals (R-Y and B-Y). These signals are identified and recorded digitally (Digital Component Recording). The A/D (Analog to Digital) converter samples the Y signal at 13.5 MHz, and R-Y and B-Y at 3.375 MHz, and changes them to an 8-bit quantum signal. Sound sampled at 48 kHz is changed to a 16-bit quantum signal, and sou
ページ9に含まれる内容の要旨
CONTENTS EN 9 PROVIDED ACCESSORIES 6 ABOUT DV 8 GETTING STARTED 10 Charging The Battery Pack .................................................................. 10 Installing The Battery Pack ................................................................. 11 Indoor Use..................................................................................... 12 Using The Power Pack ....................................................................... 12 Date/Time Settings ..........................
ページ10に含まれる内容の要旨
GETTING STARTED 10 EN Charging The Battery Pack You can charge one battery pack at a time, or two consecutively. ATTACH DETACH Battery pack BN-V814U To AC outlet Power cord Power cord Charger AC Power indicator 1 Adapter/Charger AA-V80U Power lamp DC OUT jack Charger indicator 2 NOTES: SUPPLY POWER TO CHARGER c If you connect the camcorder’s DC cord to the 1 Plug the AC Adapter/Charger’s power cord in adapter during battery charging, power is to an AC outlet. The power lamp comes on. supplied to
ページ11に含まれる内容の要旨
EN 11 Charging Environment Perform charging where the temperature is between 10° and 30°C (50°F and 86°F). 20° to 25°C (68°F to 77°F) is the ideal temperature range for charging. If the environment is too cold, charging may be incomplete. Continuous Shooting Continuous shooting is possible (See table below for recording time) under the following conditions: • A BN-V814U Battery Pack is in use • The temperature is approximately 20°C/68°F However, . . . • If the temperature is below 10°C/50°F, or
ページ12に含まれる内容の要旨
GETTING STARTED (Cont.) 12 EN Indoor Use When using the camcorder indoors, you can use the AC Adapter instead of a battery. Power cord To AC outlet Connector is under the cover DC-IN AC Power Power lamp Adapter/Charger When power is Core supplied, the Filter power lamp lights. To DC OUT jack DC cord NOTE: SUPPLY POWER TO ADAPTER When using the provided DC cord, make sure you 1 Plug the AC Adapter/Charger’s power cord in connect the end of the cable with the core filter to to an AC outlet. the c
ページ13に含まれる内容の要旨
5S Y M M EN 13 Date/Time Settings Date and time will automatically be recorded on tape at all times. It is your choice to display it or not during playback (Z pg. 56). LCD monitor REC MODE SP WIDE MODE OFF Power lamp ZOOM 40X DIS OFF GAIN UP AGC Power Dial 4TO DATE / TIME MENU TO SYSTEM MENU END Recording Menu Lock button ON SCREEN OFF DISPLAY ON 4DATE / TIME DEC 25 ’ 98 MENU button Select Dial PM 5 : 30 RETURN Date/Time Menu Regarding Built-in Rechargeable Battery SELECT OPERATION MODE To
ページ14に含まれる内容の要旨
GETTING STARTED (Cont.) 14 EN Loading/Unloading A Cassette The camcorder needs to be powered up to load or eject a cassette. Cassette cover Cassette holder OPEN/EJECT PUSH-OPEN switch button Erase protection switch** Make sure the window PUSH HERE side is facing out. NOTES: OPEN LCD MONITOR c It takes a few seconds for the cassette holder to 1 Press the PUSH-OPEN button and open the open. Do not apply force. LCD monitor up to an angle of 90 degrees. c If you wait a few seconds and the cassette
ページ15に含まれる内容の要旨
5S Y M M EN 15 Recording Mode Setting Set depending on your preference. LCD monitor Power lamp Recording Menu Power dial 4REC MODE SP WIDE MODE OFF ZOOM 40X DIS OFF GAIN UP AGC TO DATE / TIME MENU TO SYSTEM MENU END Lock button 4REC MODE SP WIDE MODE OFF ZOOM 40X MENU button DIS OFF GAIN UP AGC Select Dial TO DATE / TIME MENU TO SYSTEM MENU Recording mode indicator END SP SP LP SELECT OPERATION MODE SET RECORDING MODE 1 Set the Power Dial to “ ” while pressing down 4 First move the pointer and h
ページ16に含まれる内容の要旨
GETTING STARTED (Cont.) 16 EN Grip Strap Attachment Tripod Mounting Align the tripod’s screw with the mounting socket on the bottom of the camcorder. The camcorder can be mounted on a tripod even Zoom switch with the Power Pack attached. Pad Bottom of the camcorder 1 3 2 START/STOP ADJUST LENGTH 1 Open the pad 1. Adjust so your thumb and fingers can easily operate the START/STOP button and the zoom switch. Position the pad so that it contacts the back of your hand 2, then re-attach it 3.
ページ17に含まれる内容の要旨
5S Y M A L P A M EN 17 Shoulder Strap Attachment When transporting the camcorder, it is convenient to use the shoulder strap. ATTACH SHOULDER STRAP 1 As shown in 1 and 2 of the illustration, thread the strap through the eyelets and the buckles. Pull the strap to make sure it is attached to the camcorder firmly. 2 1 •If the strap is not attached correctly and the camcorder drops, the camcorder may become damaged. 1 2 Diopter Adjustment Adjust the viewfinder display for best viewing. PAUSE Diopter
ページ18に含まれる内容の要旨
GETTING STARTED (Cont.) 18 EN Remote Control Unit You can use the RM-V711U to control the camcorder. When using the remote control, be sure to point it at the remote sensor. The transmitted beam effective area for indoor use is approx. 5 m. The transmitted beam may not be effective or may cause incorrect operation if the remote sensor is directly exposed to sunlight or powerful lighting. START/STOP Button (Z pg. 71) PAUSE IN connector (Z pg. 65) Zoom Buttons (Z pg. 54) AUDIO MONITOR Button (Z p
ページ19に含まれる内容の要旨
5S Y M A L P M A A M A M EN 19 Operation Mode Tuning the Power Dial allows you to choose the appropriate operation mode among the following modes: Full Auto mode ( ), Manual mode ( ), 5 second mode recording (5S), Self-Timer mode ( ) and “PLAY”. According to the Power Dial position you have selected, “F.AUTO” or “MANUAL” appears in the upper left corner. When set to When set to “ ” “ ”, “5S” or “ ” F . AUTO MANUAL PAUSE PAUSE To turn on the camcorder, first turn the Power Dial to any operation m
ページ20に含まれる内容の要旨
5S Y M A L P A RECORDING Basic Recording 20 EN You should already have performed the necessary preparations (Z pgs. 10 – 19). Set the Power Dial to “ ” and try recording that way before attempting to use more advanced features. NOTE: Before starting recording, make sure you set the date and time (Z pg. 13). Even if they don’t appear during recording, you can display them during playback (Z pg. 57). Display START/STOP REC button PAUSE 444 During recording ON/OFF Tally lamp Display Power Dial PAU
