ページ1に含まれる内容の要旨
Owner's Manual
WARNING
Exercise can present a health
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
tightened prior to each
ページ2に含まれる内容の要旨
TABLE OF CONTENTS Page Page Safety Instructions 2 Maintenance 12 Before You Begin 4 Storage 13 Equipment Warning & Notice Labels 5 Product Parts Drawing 14 Hardware Identification Chart 6 Parts List 15 Assembly Instructions 7 Warranty 16 Using The Electronics Meter 10 Notes 17 Treadmill Adjustments 11 Fax/Mail Ordering Form 18 SAFETY INSTRUCTIONS WARNING: To reduce the risk of serious injury, read the following Safety Instructions before using the INMOTION T3000 Treadmill. 1.
ページ3に含まれる内容の要旨
CALL US FIRST Customer Service 1(800) 375-7520 www.staminaproducts.com THANK YOU FOR PURCHASING THE INMOTION T3000 TREADMILL To help you get started, we have pre-assembled most of your INMOTION T3000 Treadmill at the factory with the exception of those few parts left unassembled for shipping purposes. Simply follow the few assembly instructions set forth in this manual. With regular workouts you will be getting your body into shape and on your way to achieving a happier and healthier lifestyle.
ページ4に含まれる内容の要旨
BEFORE YOU BEGIN Thank you for choosing the INMOTION T3000 Although Stamina constructs its products with the Treadmill. We take great pride in producing this finest materials and uses the highest standards of manufacturing and quality control, there can quality product and hope it will provide many hours of quality exercise to make you feel better, look better sometimes be missing parts or incorrectly sized and enjoy life to its fullest. parts. If you have any questions or problems with Ye
ページ5に含まれる内容の要旨
EQUIPMENT WARNING & NOTICE LABELS This chart is provided to help identify the warning & notice labels on the INMOTION T3000 Treadmill. Please take a moment to familiarize yourself with all of the warning & notice labels. Label is larger than actual size W1 WARNING LABEL(46) 5
ページ6に含まれる内容の要旨
HARDWARE IDENTIFICATION CHART This chart is provided to help identify the hardware used in the assembly process. Place the washers, the ends of the bolts, or screws on the circles to check for the correct diameter. Use the small scale to check the length of the bolts and screws. 3/16" 1/4" 5/16" 3/8" 1/2" INCHES 02 1/2 1 1/2 1/2 3 1/2 4 1/2 5 1/2 6 in. mm. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 length MILLIMETERS 6 8 10 12 NOTICE: The length of all bolts and screws except those wit
ページ7に含まれる内容の要旨
ASSEMBLY INSTRUCTIONS Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part please call our toll-free number for assistance 1 (800) 375-7520 or e-mail us at: parts@staminaproducts.com STEP 1 NOTE: The LEFT UPRIGHT(2) is the one with the LOWE
ページ8に含まれる内容の要旨
ASSEMBLY INSTRUCTIONS Slide down the upper parts of the FOAM GRIPS(22) for assembly. STEP 2 Place the BASE FRAME(1) between the LEFT and RIGHT UPRIGHTS(2, 3) and secure with HEX BOLTS(M12x1.75x75mm)(35) and WASHERS(M12)(45). DO NOT TIGHTEN COMPLETELY. STEP 3 Slide down the upper parts of the FOAM GRIPS(22), so you can see the screw holes at the back side of the tops of the LEFT and RIGHT UPRIGHTS(2, 3). Connect the UPPER EXTENSION WIRE(26) to the LOWER EXTENSION WIRE(27). Insert the U-SHA
ページ9に含まれる内容の要旨
ASSEMBLY INSTRUCTIONS STEP 5 Install two AA batteries into the METER(24), two batteries included. See page 10 for detailed battery installation instructions. Slide the METER(24) onto the plate on the U-SHAPED HANDRAIL(5). Connect the UPPER EXTENSION WIRE(26) to the METER(24). STEP 6 Attach the BUMPER STANDS(20) to the bottom of the BASE FRAME(1). NOTE: The BUMPER STANDS(20) may be stored on the end of the BASE FRAME(1) to increase the angle of the treadmill and reduce the walking resistance. Se
ページ10に含まれる内容の要旨
USING THE ELECTRONIC METER POWER ON : Walking Belt movement or push the button. POWER OFF : Automatic shut off after 4 minutes of inactivity. MODE / CLEAR BUTTON: Press and release to select functions. Press and hold for three seconds to reset all functions to zero. FUNCTIONS: SCAN: Automatically scans TIME, SPEED, DISTANCE, and CALORIES in sequence with a change every four seconds. Press and release the button until " " appears on the display and points to SCAN. TIME: Displays the time from 1
ページ11に含まれる内容の要旨
TREADMILL ADJUSTMENTS The basic idea behind the manual treadmill is to have the belt running on a treadmill board and between two rollers so that the belt will move without much effort. In order for the belt to run smoothly, there are a few points that need to be noted. BELT ALIGNMENT The belt must be in the center of the treadmill to prevent it from rubbing against the flywheels. If the belt rubs a flywheel, it will be difficult to keep the belt moving and eventually damage the edge of the belt
ページ12に含まれる内容の要旨
TREADMILL ADJUSTMENTS WALKING RESISTANCE The walking resistance or effort needed to push the treadmill belt can be adjusted by changing the incline angle. This treadmill has two adjustment positions. Highest Resistance Lowest Resistance The BUMPER STANDS(20) are attached to Remove (unscrew) the BUMPER STANDS(20) the bottom of the treadmill. from the bottom of the treadmill and store them in the end of the treadmill. NOTE: 1. Since this is a new machine, you may need some time to get used to walk
ページ13に含まれる内容の要旨
STORAGE 1. To store the INMOTION T3000 Treadmill simply keep it in a clean dry place. 2. To avoid damage to the electronics meter, remove the batteries before storing the INMOTION T3000 Treadmill for one year or more. 3. Follow the following process to fold The INMOTION T3000 Treadmill as illustrated for easy storage. a. Remove the PULL PIN(6) to unlock the BASE FRAME ASSEMBLY(1). b. Fold up the BASE FRAME ASSEMBLY(1). Insert the PULL PIN(6) into the hole in the BASE FRAME ASSEMBLY(1) to lock th
ページ14に含まれる内容の要旨
PRODUCT PARTS DRAWING FRONT Belt Guides BACK 14
ページ15に含まれる内容の要旨
PARTS LIST DIAGRAM# PART NAME QTY 1 Base Frame 1 2 Left Upright 1 3 Right Upright 1 4 Upright Support 1 5 U-Shaped Handrail 1 6 Pull Pin 1 7 Bumper 1 8 Front Roller /w Flywheels 1 9 Front Shaft 1 10 Bearing (6000zz) 4 11 Plastic Spacer 4 12 Rear Roller 1 13 Rear Shaft 1 14 Adjustment Bracket 2 15 Walking Belt 1 16 Board 1 17 Left Side Molding 1 18 Right Side Molding 1 19 Round Cap (38mm) 2 20 Bumper Stand 2 21 Moving Wheel
ページ16に含まれる内容の要旨
LIMITED WARRANTY MODEL 45-1003 WARRANTY Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanship under normal use, service and proper operation for a period of 90 days on the parts and one year on the frame from the date of the original purchase from an authorized retailer. THIS WARRANTY SHALL NOT APPLY TO ANY PRODUCT WHICH HAS BEEN SUBJECT TO COMMERCIAL USE, ABUSE, MISUSE, ALTERATION OF ANY TYPE OR CAUSE OR TO ANY DEFECT OR DAMAGE CAUSED BY REPAI
ページ17に含まれる内容の要旨
NOTES 17
ページ18に含まれる内容の要旨
FAX/MAIL ORDERING FORM Please do not return the product. For your convenience, Stamina's Customer Service Department can be reached by email at parts@staminaproducts.com or toll free at 1-800-375-7520 (in the U.S.). Should a part be missing or a defective part found, please call us from 7:30 A.M. to 5:00 P.M. Central Time, Monday through Thursday and 8:00 A.M. to 3:00 P.M. on Friday or fill out the fax sheet ordering form below and fax it to (417) 889-8064. Our Customer Service Department will b
