ページ1に含まれる内容の要旨
www.proform.com
Model No. PFTL66010.0
Serial No. USER'S MANUAL
Write the serial number in the space
above for reference.
Serial Number
Decal
QUESTIONS?
If you have questions, or if parts are
damaged or missing, DO NOT CON-
TACT THE STORE; please contact
Customer Care.
IMPORTANT: Please register this
product (see the limited warranty
on the back cover of this manual)
before contacting Customer Care.
CALL TOLL-FREE:
1-888-533-1333
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT
ON THE WEB:
www.pr
ページ2に含まれる内容の要旨
TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . .
ページ3に含まれる内容の要旨
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and in- structions in this manual and all warnings on your treadmill before using your treadmill. ICON as- sumes no responsibility for personal injury or property damage sustained by or through the use of this product. 1. Before beginning any exercise program, con- carrying 15 or more amps. No other appliance sult your physician. This is especially impor- should be on the same circuit. Do not use
ページ4に含まれる内容の要旨
20. Never leave the treadmill unattended while it 24. Inspect and properly tighten all parts of the is running. Always remove the key, unplug treadmill regularly. the power cord, and switch the reset/off cir- cuit breaker to the off position when the 25. DANGER: Always unplug the power treadmill is not in use. (See the drawing on cord immediately after use, before cleaning the page 5 for the location of the circuit breaker.) treadmill, and before performing the mainte- nance and adjustment proce
ページ5に含まれる内容の要旨
BEFORE YOU BEGIN ® Thank you for selecting the revolutionary PROFORM ing this manual, please see the front cover of this man- 605 CS treadmill. The 605 CS treadmill offers an im- ual. To help us assist you, please note the product pressive selection of features designed to make your model number and serial number before contacting us. workouts at home more enjoyable and effective. And The model number and the location of the serial num- when youʼre not exercising, the unique treadmill can be ber
ページ6に含まれる内容の要旨
ASSEMBLY To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton. This is normal and does not affec
ページ7に含まれる内容の要旨
1. Make sure that the power cord is unplugged. 1 With the help of a second person, carefully tip B A the treadmill onto its left side. Partially fold the Frame (55) so that the treadmill is more stable; Hole do not fully fold the Frame yet. 87 90 Remove and discard the two indicated bolts (A) 5 and the shipping bracket (B). Cut the shipping tie securing the Upright Wire (87) to the Base (95). Locate a plastic tie in the 95 indicated hole in the Base, and use the tie to pull the Upright Wire out
ページ8に含まれる内容の要旨
3. Identify the Right Upright (85) and the Right 3 Upright Spacer (91), which are marked with “Right” stickers. Align the oval hole in the Right 85 Upright Spacer with the oval hole in the Base (95). If the holes do not line up, turn the Right Upright Spacer and try again. 87 87 Wire Tie Oval Insert the Upright Wire (87) through the Right Hole 91 Upright Spacer (91) as shown. Set the Right 95 Upright Spacer on the Base (95). Have a second person hold the Right Upright Oval (85) near the Base (95
ページ9に含まれる内容の要旨
5. With the help of a second person, carefully tip 5 B the treadmill onto its right side. Partially fold the Frame (55) so that the treadmill is more stable; do not fully fold the Frame yet. A Remove and discard the two indicated bolts (A) and the shipping bracket (B). Attach a Wheel (96) to the Base (95) with a 3/8" 89 x 2" Bolt (8) and a 3/8" Nut (10). Do not over- 8 tighten the Nut; the Wheel must turn freely. 55 Press a Base Cap (89) into the Base (95). 95 96 10 6. Align the oval hole in the
ページ10に含まれる内容の要旨
7. Insert the bracket on the Left Handrail (82) into 7 the Left Upright (84). 102 Insert the Upright Wire (87) several inches downward into the Right Upright (85); make 9 sure that the wire tie does not fall into the Right Upright. Then, insert the Right Handrail 12 Welded (83) into the Right Upright. Be careful not to Nuts pinch the Upright Wire. 82 Bracket Orient the Console Frame (102) as shown, with 9 the welded nuts on the bottom. Insert the ends of the Console Frame into the Left and Right
ページ11に含まれる内容の要旨
9. With the help of a second person, hold the 9 handrail assembly (B) upside-down near the console assembly (A). Connect the Console Ground Wires (6) in the handrail assembly to the ground wires in the console assembly. B Insert the console wire (C) into the track in the console assembly (A). Insert the Console Ground Wires (6) into the hole in the console assembly (A) as you set the A handrail assembly (B) in the console assembly. Make sure that the console wire (C) stays in the track. Be caref
ページ12に含まれる内容の要旨
11. Slide the Left Upright Cover (80) onto the Left 11 Upright (84). Slide the Right Upright Cover (86) onto the 84 Right Upright (85). 85 80 86 12. With the help of a second person, hold the con- 12 sole assembly (A) near the Right Upright (85) and the Left Upright (not shown). Insert the Upright Wire (87) into the hole in the bottom of the Right Handrail and out of the end as shown. Notch A Connect the Upright Wire (87) to the console wire (C). See the inset drawing. The connec- tors should sl
ページ13に含まれる内容の要旨
13. Attach the console assembly (A) to the Left 13 A Upright (84) and the Right Upright (85) with six 5/16" x 1" Patch Bolts (4) and six 5/16" Star Washers (13). Start all six Patch Bolts, and then tighten all of them. 4 See steps 4 and 6. Tighten the 3/8" x 4 1/4" Patch Bolts (7). 13 4 4 13 4 13 13 84 85 14. Raise the Frame (55) to the position shown. 14 Have a second person hold the Frame until this step is completed. 55 Orient the Storage Latch (51) so that the large barrel and the latch knob
ページ14に含まれる内容の要旨
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT that is properly installed and grounded in accor- dance with all local codes and ordinances. Your treadmill features a walking belt coated with high- IMPORTANT: The treadmill is not compatible with performance lubricant. IMPORTANT: Never apply sil- GFCI-equipped outlets. icone spray or other substances to the walking belt or the walking platform. Such substances will This product is for use on a nominal 120-volt circuit cause excessive wea
ページ15に含まれる内容の要旨
CONSOLE DIAGRAM Audio Jack FEATURES OF THE CONSOLE You can even listen to your favorite workout music or audio books with the consoleʼs stereo sound system. The treadmill console offers an impressive array of features designed to make your workouts more effec- To turn on the power, see page 16. To use the man- tive and enjoyable. When you use the manual mode of ual mode, see page 16. To use a preset workout, the console, you can change the speed and incline of see page 18. To use the iFit traini
ページ16に含まれる内容の要旨
HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not See HOW TO TURN ON THE POWER at the left. do this, you may damage the console displays or other electrical components. 2. Select the manual mode. Plug in the power cord (see Each time the key is in- page 14). Next, locate the serted, the main menu reset/off circu
ページ17に含まれる内容の要旨
4. Change the incline of the treadmill as desired. 6. Measure your heart rate if desired. To change the incline of the treadmill, press the Before using Incline increase or decrease button, or one of the the handgrip incline buttons numbered 0 to 10. Each time you pulse sensor, press one of the buttons, the incline will gradually remove the change until it reaches the selected incline setting. sheets of plas- tic from the 5. Select a display mode and monitor your metal contacts. progress with th
ページ18に含まれる内容の要旨
HOW TO USE A PRESET WORKOUT the button, the treadmill will automatically adjust to the first speed and incline settings of the workout. 1. Insert the key into the console. Hold the handrails and begin walking. See HOW TO TURN ON THE POWER on page 16. Each preset workout is divided into segments. One speed setting and one incline setting are pro- 2. Select a preset workout. grammed for each segment. Note: The same speed and/or incline setting may be programmed If you have selected the manual mode
ページ19に含まれる内容の要旨
Note: The calorie goal for each calorie workout HOW TO USE THE IFIT TRAINING MODE is an estimate of the number of calories that you will burn during the workout. The actual The optional iFit Live module allows your treadmill to number of calories that you burn will depend communicate with your wireless network and unlocks on your weight. In addition, if you manually exciting new features. For example, you can download change the speed or incline of the treadmill personalized workouts, create you
ページ20に含まれる内容の要旨
THE INFORMATION MODE The display will also show the contrast level of the dis- play. Press the Incline increase and decrease buttons The console features an information mode that keeps to adjust the contrast. track of the total distance that the walking belt has moved and the total number of hours that the treadmill The display will show whether an accessory is plugged has been used. You can also select miles or kilome- into the console. If the iFit Live module is plugged in, ters to measure dis
