ページ1に含まれる内容の要旨
Model No. PFTL59810
Serial No.
USER'S MANUAL
Serial
Number
Decal
QUESTIONS?
If you have questions, or if there
are missing parts, we will guar-
antee complete satisfaction
through direct assistance from
our factory.
TO AVOID UNNECESSARY DE-
LAYS, PLEASE CALL DIRECT TO
OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our Customer Hot Line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.–Fri., 6 a.m.–6 p.m. MST
CAUTION
Visit our we
ページ2に含まれる内容の要旨
TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 O
ページ3に含まれる内容の要旨
16. The treadmill is capable of high speeds. 20. When folding or moving the treadmill, make Adjust the speed in small increments to sure that the storage latch is fully closed. avoid sudden jumps in speed. 21. Inspect and tighten all parts of the treadmill 17. The pulse sensor is not a medical device. every three months. Various factors, including the user's move- ment, may affect the accuracy of heart rate 22. Never drop or insert any object into any readings. The pulse sensor is intended onl
ページ4に含まれる内容の要旨
BEFORE YOU BEGIN ® Thank you for selecting the new PROFORM CX5i at 1-800-999-3756, Monday through Friday, 6 a.m. treadmill. The CX5i treadmill combines advanced tech- until 6 p.m. Mountain Time (excluding holidays). To nology with innovative design to let you enjoy an excel- help us assist you, please note the product model lent form of cardiovascular exercise in the convenience number and serial number before calling. The model and privacy of your home. And when you’re not exer- number of the t
ページ5に含まれる内容の要旨
ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Refer to the drawings below to identify the parts used in assembly. Assembly requires the following tools: The allen wrench included and your own phillips screwdriver , mallet wire cutters and needle-nose pliers . Note: The underside o
ページ6に含まれる内容の要旨
3. With the help of a second person, carefully tip the Uprights 3 (82) down as shown. Note: It may be helpful to place a 97 foot on one of the Wheels (95) as you tip the treadmill. 82 Attach each Extension Leg (103) with two Screws (101) and a Base Pad (52) as shown. Make sure that the 52 Extension Legs are fully inserted into the Uprights (82); push down on the Uprights as you tighten the Screws. 101 Note: One replacement Base Pad (52) and Spacer (not 103 97 shown) may be included. If a Base Pa
ページ7に含まれる内容の要旨
OPERATION AND ADJUSTMENT TM THE PERFORMANT LUBE WALKING BELT an equipment-grounding conductor and a grounding plug. Plug the power cord into a surge suppressor, Your treadmill features a walking belt coated with and plug the surge suppressor into an appropriate TM PERFORMANT LUBE , a high-performance lubricant. outlet that is properly installed and grounded in IMPORTANT: Never apply silicone spray or other accordance with all local codes and ordinances. substances to the walking belt or the walk
ページ8に含まれる内容の要旨
CONSOLE DIAGRAM Incline Control LED Track Displays Speed Control Note: If there is a thin sheet of clear plastic on Clip the face of the console, remove it. Key ies into the battery compartment, making sure that the negative (–) ends of the batteries are touching the CAUTION: Before operating the springs in the battery compartment. console, read the following precautions. Close the battery cover, push up on the battery cover • Do not stand on the walking belt when turn- tab, and then push the
ページ9に含まれる内容の要旨
SPEED display—This Reset the speed control and start the walking 2 display shows the belt. speed of the walking belt, in miles per hour. Slide the speed control to the RESET position. (Note: Each time the walking belt is stopped, the speed control must be moved to the RESET To reset the displays at any time, press the position before the walking belt can be ON/RESET button. restarted.) Next, slowly slide the speed control to the right until the walking belt begins to move at slow speed. Caref
ページ10に含まれる内容の要旨
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE 1 Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill. 1. Hold the treadmill with your hands in the locations shown at the right. (CAUTION: To decrease the possibility of injury, bend your legs and keep your back stra
ページ11に含まれる内容の要旨
HOW TO LOWER THE TREADMILL FOR USE 1 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the lock knob to the left Slot and hold it. Pivot the treadmill until the frame and foot rail are past the pin on the lock knob. If necessary, push the handrail to the left slightly. Knob 2. Hold the treadmill firmly with both hands, and lower the 2 treadmill to the floor. Do not drop the treadmill frame to the floor. To decrease the possibility of injury, bend y
ページ12に含まれる内容の要旨
TROUBLE-SHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a proper
ページ13に含まれる内容の要旨
PROBLEM: The pulse display on the console does not function properly SOLUTION: a. Wash your hands prior to using the pulse sensor. Clean the sensor with a damp cloth and mild de- tergent. PROBLEM: The incline system does not function properly SOLUTION: a. Make sure that the two wires under the console are fully plugged in (refer to assembly step 4 on page 6). WARNING: Do not disconnect or connect the wires while the treadmill power cord is plugged in. PROBLEM: The walking belt slows when walked
ページ14に含まれる内容の要旨
CONDITIONING GUIDELINES is to burn fat, adjust the speed and incline of the tread- mill until your heart rate is near the lowest number in WARNING: Before beginning this your training zone. or any exercise program, consult your physi- cian. This is especially important for individu- For maximum fat burning, adjust the speed and incline als over the age of 35 or individuals with pre- of the treadmill until your heart rate is near the middle existing health problems. number in your training zone.
ページ15に含まれる内容の要旨
PART LIST—Model No. PFTL59810 R1201A To locate the parts listed below, refer to the EXPLODED DRAWING attached in the center of this manual. Key Key Key No. Qty. Description No. Qty. Description No. Qty. Description 1 1 Motor Belt 41 2 Foot Rail 80 1 Wire Cover 2 1 Pulley/Flywheel/Fan 42 1 Front Roller/Pulley 81 4 Motor Star Washer 3 4 Motor Nut 43 1 Magnet 82 1 Upright 4* 1 Motor/Pulley/ 44 4 Platform Screw 83 2 Incline Leg Pivot Bolt Flywheel/ Fan 45 4 Isolator 84 2 Motor Tension 5 2 Incline
ページ16に含まれる内容の要旨
EXPLODED DRAWING—Model No. PFTL59810 R1201A 8 4* 37 5 7 27 3 66 1 2 15 16 16 6 28 24 16 19 74 16 3 18 34 26 76 62 16 84 39 21 22 25 48 15 40 15 5 39 33 15 41 29 81 38 31 35 32 75 16 43 16 75 45 41 44 33 18 42 32 15 46 71 106 49 45 44 107 44 51 76 76 70 69 46 45 73 68 44 55 46 58 76 73 47 12 68 76 49 45 57 58 107 47 47 76 46 59 60 54 16 47 67 53 92 63 65 59 92 64 101 60 65 61 To identify the parts shown on this exploded drawing, refer to the PART LIST on page 15 of the User’s Manual.
ページ17に含まれる内容の要旨
EXPLODED DRAWING—Model No. PFTL59810 R1201A 10 9 88* 79 89 92 92 89 79 85 87 76 76 102 36 93 36 76 23 108 105 102 76 36 56 17 36 13 76 11 77 89 76 30* 14 76 92 89 92 82 76 76 90 50 76 83 80 76 104 91 16 97 101 16 101 101 96 83 16 20 52 78* 103 104 101 16 17 99 86 97 95 97 15 101 101 94 20 78* 15 52 98 103 100 72 101 97 95 16 101 86
ページ18に含まれる内容の要旨
ORDERING REPLACEMENT PARTS To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). When ordering parts, please be prepared to give the following information: • The MODEL NUMBER OF THE PRODUCT (PFTL59810) ® • The NAME OF THE PRODUCT (PROFORM CX5i treadmill) • The SERIAL NUMBER OF THE PRODUCT (see the front cover of this manual) • The KEY NUMBER AND DESCRIPTION OF THE PART(S) (see t