ページ1に含まれる内容の要旨
¨
Model No. 831.299220
Serial No.
The serial number is found in the location
shown below. Write the serial number in
the space above for future reference.
Serial Number
Decal
CAUTION
Read all precautions and in-
structions in this manual before
USER'S MANUAL
using this equipment. Save this
manual for future reference.
SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179
ページ2に含まれる内容の要旨
TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 O
ページ3に含まれる内容の要旨
13. Never move the walking belt while the power to raise, lower, or move the treadmill. is turned off. Do not operate the treadmill if the power cord or plug is damaged, or if the 18. When folding or moving the treadmill, make treadmill is not working properly. (See BE- sure that the storage latch is fully closed. FORE YOU BEGIN on page 4 if the treadmill is not working properly.) 19. Inspect and tighten all parts of the treadmill every three months. 14. Never start the treadmill while you a
ページ4に含まれる内容の要旨
BEFORE YOU BEGIN ¨ Thank you for selecting the new PROFORM T45 Monday through Saturday, 7 a.m. until 7 p.m. Central treadmill. The T45 treadmill combines advanced tech- Time (excluding holidays). To help us assist you, nology with innovative design to let you enjoy an excel- please note the product model number and serial num- lent form of cardiovascular exercise in the convenience ber before calling. The model number of the treadmill and privacy of your home. And when youÕre not exer- is 831.29
ページ5に含まれる内容の要旨
ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench and your own phillips screwdriver . Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. Th
ページ6に含まれる内容の要旨
3. Hold one of the Handrails (1) at an angle as shown and 3 insert the upper end as far as possible into the right Upright (11). Keep the lower end of the Handrail away 11 from the treadmill to avoid scratching the finish. Next, 1 rotate the lower end of the Handrail to the position shown by the dotted line. Note: It may be necessary to push on the lower end of the Handrail in order to position it against the bracket on the Extension Leg (34). Bracket 3a.Refer to drawing 3a. Make sure that the
ページ7に含まれる内容の要旨
OPERATION AND ADJUSTMENT TM THE PERFORMANT LUBE WALKING BELT This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illus- Your treadmill features a walking belt coated with trated in drawing 1 below. A temporary adapter that TM PERFORMANT LUBE , a high-performance lubricant. looks like the adapter illustrated in drawing 2 may be IMPORTANT: Never apply silicone spray or other used to connect the surge suppressor to a 2-pole substances to the wal
ページ8に含まれる内容の要旨
CONSOLE DIAGRAM LED Track Note: If there is a thin sheet of clear plastic on the face of the console, remove it before operating the console. CAUTION: Before operating the console, read the following precautions. ¥ Do not stand on the walking belt when turning on the power. Battery ¥ Always wear the clip (see the drawing at Cover Batteries Battery the lower right) while using the treadmill. Cover Tab When the key is removed from the console, the walking belt will stop. ¥ Adjust the speed in s
ページ9に含まれる内容の要旨
until you have completed 1/4 mile. A new lap will Insert the key fully into the power switch. 1 then begin. Inserting the key will SPEED displayÑThis not turn on the dis- display shows the plays. The displays will speed of the walking turn on when the belt, in miles per hour. ON/RESET button is pressed or when the walking belt is started. TIME displayÑThis Note: If you just display shows the installed batteries, the displays will already be on. elapsed time. Reset the speed control. 2 Slide
ページ10に含まれる内容の要旨
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, unplug the power cord. Caution: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill. 1. Hold the treadmill with your hands in the locations shown at the right. To decrease the possibility of injury, bend your legs and keep your back straight. As you raise the treadmill, make sure to lift with your legs rather than your back. Raise the treadmill abo
ページ11に含まれる内容の要旨
HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left thumb, press the storage latch and hold it. Pivot the treadmill until the frame and foot rail are past the storage latch. Storage Unlatched Latch 2. Hold the treadmill firmly with both hands, and lower the treadmill to the floor. To decrease the possibility of in- jury, bend your legs and keep your back straight. 11
ページ12に含まれる内容の要旨
TROUBLE-SHOOTING Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our toll-free HELPLINE at 1-800-736-6879, Monday through Saturday, 7 a.m. until 7 p.m. Central Time (excluding holidays). 1. SYMPTOM: THE POWER DOES NOT TURN ON a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see
ページ13に含まれる内容の要旨
4. SYMPTOM: THE WALKING BELT SLOWS WHEN WALKED ON a. Use only a UL-listed surge suppressor, rated at 15 amps, with a 14-gauge cord of five feet or less in length. b. If the walking belt is overtightened, treadmill performance may b decrease and the walking belt may be permanently damaged. 2ÓÐ3Ó Remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts counterclock- wise, 1/4 of a turn. When the walking belt is properly tightened, you should be able
ページ14に含まれる内容の要旨
CONDITIONING GUIDELINES training zone. It may also be helpful to set the speed control on the console to FAT BURN to help you main- WARNING: Before beginning tain the proper intensity level. (See page 9.) this or any exercise program, consult your physician. This is especially important for in- Aerobic Exercise dividuals over the age of 35 or individuals with pre-existing health problems. If your goal is to strengthen your cardiovascular sys- tem, your exercise must be Òaerobic.Ó Aerobic exercis
ページ15に含まれる内容の要旨
Training Zone Exercise to cool down. This will increase the flexibility of your muscles and will help to prevent post-exercise problems. After warming up, increase the intensity of your exer- cise until your pulse is in your training zone for 20 to Exercise Frequency 60 minutes. (During the first few weeks of your exer- cise program, do not keep your pulse in your training To maintain or improve your condition, complete three zone for longer than 20 minutes.) Breathe regularly workouts each week
ページ16に含まれる内容の要旨
PART LISTÑModel No. 831.299220 R0699A Key No. Qty. Description Key No. Qty. Description 1 2 Handrail 48 4 Platform Screw 2 1 Key/Clip 49 4 Isolator 3 8 Screw 50 1 Front Roller/Pulley 4 1 Battery Cover 51 1 Front Roller Adj. Bolt 5 2 Foot Rail 52 2 Incline Wheel 6 1 Lift Motor 53 4 Extension Leg Screw 7 1 Incline Control 54 1 Power Cord 8 1 Speed Potentiometer 55 1 Power Cord Grommet 9 1 Speed Control Knob 56 1 Circuit Breaker 10* 1 Console Assembly 57 2 Frame Pivot Washer 11 1 Upright Base 58 2
ページ17に含まれる内容の要旨
EXPLODED DRAWINGÑModel No. 831.299220 R0699A 22 2 22 12 7 74 3 9 10* 46 11 13 1 8 21 23 27 20* 3 24 13 41 75 14 18 13 19 22 53 35 61 76 13 13 34 13 78 39 25 17 4 36 40 29 13 37 25 28 38 47 48 38 45 44 33 55 31 54 49 30 70 56 43 5 25 50 71 26 73 48 51 48 39 5 49 81 38 67 33 47 73 68 62 42 58 49 25 31 72 32 48 53 57 31 41 73 70 34 87 66 65 59 62 53 73 69 38 64 86 38 37 39 72 40 66 59 40 36 6 38 25 49 25 84 1 66 89 73 33 33 66 31 63 77 73 52 85 39 31 61 33 33 66 60 38 88 16 82 79 39 33 40 83 52 15
ページ18に含まれる内容の要旨
¨ The model number and serial number of your PROFORM T45 Model No. 831.299220 treadmill are listed on a decal attached to the frame. See the front cover of this manual to find the location of the decal. All replacement parts are available for immediate purchase or QUESTIONS? special order when you visit your nearest SEARS Service Center. To request service or to order parts by telephone, call the toll-free If you find that: numbers listed at the left. ¥ you need help assembling or operating the
