ページ1に含まれる内容の要旨
Model No. 831.297763
Serial No.
The serial number is found in the location
shown below. Write the serial number in
the space above for future reference.
Serial
Number
Decal
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference. USER'S MANUAL
SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179
ページ2に含まれる内容の要旨
TABLE OF CONTENTS FULL 90 DAY WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . .
ページ3に含まれる内容の要旨
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. 1. It is the responsibility of the owner to ensure 12. Keep the power cord and the surge protector that all users of this treadmill are adequately away from heated surfaces. informed of all warnings and precautions. 13. Never move the walking belt while the power 2. Use the treadmill only as described in t
ページ4に含まれる内容の要旨
22. Inspect and tighten all parts of the treadmill do so by an authorized service representa- every three months. tive. Servicing other than the procedures in this manual should be performed by an au- 23. Never insert any object into any opening. thorized service representative only. 24. Always unplug the power cord before per- 25. This treadmill is intended for in-home use forming the maintenance and adjustment only. Do not use this treadmill in any com- procedures described in this manual. Nev
ページ5に含まれる内容の要旨
BEFORE YOU BEGIN ® Thank you for selecting the PROFORM 725 TL tread- Time (excluding holidays). To help us assist you, mill. The 725 TL treadmill blends advanced technology please note the product model number and serial num- with innovative design to let you enjoy an excellent ber before calling. The model number of the treadmill form of cardiovascular exercise in the convenience is 831.297763. The serial number can be found on a and privacy of your home. decal attached to the treadmill (see t
ページ6に含まれる内容の要旨
ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench , a phillips screwdriver and scissors (not included) . 1. Refer to the drawing on page 4 and identify the right 1 side of the treadmill. With the help of a second person, 13 carefully lay the treadmill on its right side; do not lay the
ページ7に含まれる内容の要旨
5. Locate the section HOW TO FOLD THE TREADMILL 5 FOR STORAGE on page 18. Follow the instructions to fold the treadmill. Thread two more Handrail Bracket Screws (15) into the 42 right Handrail Bracket (42) and Frame (83). Firmly tighten all four Screws in the Bracket. Thread two more Screws into the left Handrail Bracket and Frame (not 15 shown). Firmly tighten all four Screws in the Bracket. 83 6. Refer to HOW TO LOWER THE TREADMILL FOR USE 6 101 on page 19. Follow the instructions to lower the
ページ8に含まれる内容の要旨
HOW TO USE THE PULSE SENSOR The unique headband-style pulse sensor is specially DISPLAY). For the best results, remember the follow- designed for greater accuracy, comfort, and durability. ing important guidelines: To get the best performance from the pulse sen- sor, please read the following instructions. 1. Before putting on the headband, rub your forehead briefly to stimulate circulation. HOW TO ADJUST THE HEADBAND 2. Make sure that the headband fits snugly, without For the pulse sensor to f
ページ9に含まれる内容の要旨
OPERATION AND ADJUSTMENT TM THE PERFORMANT LUBE WALKING BELT of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a Your treadmill features a walking belt coated with grounding plug. Plug the power cord into a surge TM PERFORMANT LUBE , a high-performance lubricant. protector, and plug the surge protector into an ap- IMPORTANT: Never apply silicone spray or other propriate outlet that is properly installed and substances to the walking belt or the w
ページ10に含まれる内容の要旨
DIAGRAM OF THE CONSOLE Pulse Sensor Jack Key Note: If there is a thin sheet of clear plas- tic on the face of the console, remove it. Clip FEATURES OF THE CONSOLE CAUTION: Before operating the The treadmill console offers an impressive array of fea- console, read the following precautions. tures designed to make your workouts more effective and enjoyable. When the console is in the manual mode, • Do not stand on the walking belt when turn- the speed and incline of the treadmill can be changed i
ページ11に含まれる内容の要旨
buttons again to enter your age. Each time one of HOW TO USE THE MANUAL MODE the buttons is pressed, the age setting will change by 1 year. If one of the buttons is held down, the age setting will change in increments of 5 years. Insert the key fully into the console. After you have entered your age, your age will be 1 shown in the PULSE display for three seconds. Stand on the foot rails and insert the key. Note: Once you have entered your weight and age, Various displays and in- the numbers wil
ページ12に含まれる内容の要旨
Change the incline of the treadmill, if desired. • SPEED display 7 This display shows The incline of the tread- the current speed of mill is controlled with the the walking belt. INCLINE increase and When the SPEED decrease buttons. Each buttons are pressed, time one of the buttons the display will show is pressed, the incline the selected speed setting for seven seconds. The will change by 0.5%. display will then show the actual speed of the The buttons can be held down to change the incline wa
ページ13に含まれる内容の要旨
• Training Zone Monitor HOW TO USE THE WEIGHT LOSS PROGRAMS The training zone monitor AND THE INTERVAL PROGRAMS measures the approximate intensity of your exercise. The monitor’s five indicators The WEIGHT LOSS programs and the INTERVAL are described below: programs automatically control the speed of the walking belt as they guide you through effective workouts. The • WARM UP & COOL WEIGHT LOSS programs focus on helping you to lose DOWN—Each workout unwanted pounds; the INTERVAL programs are s
ページ14に含まれる内容の要旨
Enter your age, if desired. Press the START/PAUSE button to start the pro- 4 7 gram. After you have completed step 3, the letters “AGE” will flash in the PULSE display for seven seconds; When the the current age setting will then be shown. If you START/PAUSE want to enter your age, see step 4 on page 11. button is pressed, the Put on the pulse sensor, if desired. TIME display 5 will begin For the PULSE display counting down to show your pulse, the from 20 minutes (or 30 minutes if the INTERVAL 2
ページ15に含まれる内容の要旨
Put on the pulse sensor. HOW TO USE THE FAT BURN AND AEROBIC 5 PROGRAMS The pulse sensor must be worn when the FAT BURN or AEROBIC The FAT BURN and AEROBIC programs automatically program is used. To put control the speed and incline of the treadmill to keep on the pulse sensor, your pulse within a predetermined range during your see HOW TO USE workouts. Both programs are 30-minute programs. The THE PULSE SENSOR on page 8. Plug the pulse graphs on the left side of the console show how your sensor
ページ16に含まれる内容の要旨
incline, the speed will automatically decrease; if you To use the FITNESS TEST program, follow the steps decrease the incline, the speed will automatically below. increase. The console will always attempt to keep your pulse near a predetermined setting. When the Make sure that the key is fully inserted into the 1 incline reaches the highest setting, the speed can- console. not be decreased any further. When the incline reaches the lowest setting, the speed cannot be Stand on the foot rails incr
ページ17に含まれる内容の要旨
Press the START/PAUSE button to start the pro- after 8 minutes, etc.), the walking belt will slow to a 6 gram. stop, the FITNESS TEST will end, and the TIME dis- play will show a fitness level of 0 (FL:00). (See When the START/ GUIDELINES FOR ACCURATE PULSE READ- PAUSE button is INGS on page 8.) The FITNESS TEST program pressed, the TIME dis- cannot be stopped temporarily and then restarted. play will begin counting However, the program can be stopped at any time up. The CALORIES dis- by pressin
ページ18に含まれる内容の要旨
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Do not hold here Before folding the treadmill, adjust the incline to the lowest position. If the incline is not at the lowest position, the treadmill will be permanently damaged. Next, unplug the power cord. Caution: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill. 1. Hold the treadmill with your hands in the locations shown at the right. Caution: To avoid pinching your han
ページ19に含まれる内容の要旨
HOW TO MOVE THE TREADMILL Before moving the treadmill, convert the treadmill to the stor- age position as described above. Make sure that the stor- age latch is closed fully over the frame guide. 1. Hold the upper ends of the treadmill. Place one foot on the base as shown. 2. Tilt the treadmill back until it rolls freely on the front wheels. Carefully move the treadmill to the desired location. Never move the treadmill without tipping it back, or the base pads may come off. To reduce the risk
ページ20に含まれる内容の要旨
TROUBLE-SHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our toll-free HELPLINE at 1-800-736-6879, Monday through Saturday, 7 a.m. until 7 p.m. Central Time (excluding holidays). 1. SYMPTOM: THE POWER DOES NOT TURN ON a. Make sure that the power cord is plugged into a surge protector, and that the surge protector is plugged into a properly grounded outlet. (See HOW TO P
