ページ1に含まれる内容の要旨
Model No. NCTL10840
Serial No.
USER’S MANUAL
Find the serial number in the location
shown below. Write the serial number
in the space above for reference.
Serial Number Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, please call:
1-888-936-4266
Mon.–Fri. 8h00 until 18h30 EST
(excluding holidays).
CAUTION
Read all precautions and instruc-
tions in this manual before using
Visit our website
ページ2に含まれる内容の要旨
TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 O
ページ3に含まれる内容の要旨
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. 1. It is the responsibility of the owner to ensure 12. Failure to use a properly functioning surge that all users of this treadmill are adequately suppressor could result in damage to the con- informed of all warnings and precautions. trol system of the treadmill. If the control sys- tem is damaged, the wa
ページ4に含まれる内容の要旨
22. When using iFIT.com CDs and videos, an 26. Never insert or drop any object into any electronic “chirping” sound will alert you opening. when the speed and/or incline of the treadmill is about to change. Always listen for the 27.DANGER: Always unplug the power “chirp” and be prepared for speed and/or in- cord immediately after use, before cleaning cline changes. In some instances, the speed the treadmill, and before performing the main- and/or incline may change before the per- tenance and a
ページ5に含まれる内容の要旨
BEFORE YOU BEGIN ® Thank you for selecting the revolutionary NordicTrack Monday through Friday 8h00 until 18h30 Eastern Time C2000 treadmill. The C2000 treadmill combines ad- (excluding holidays). To help us assist you, please vanced technology with innovative design to help you note the product model number and serial number be- get the most from your exercise program in the conve- fore calling. The model number of the treadmill is nience of your home. And when you’re not exercising, NCTL10840.
ページ6に含まれる内容の要旨
ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench and your own phillips screwdriver and wire cutters . Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking bel
ページ7に含まれる内容の要旨
3. Cut the rubber band holding the Upright Wire Harness 3 98 (98). Have a second person hold the console assembly near the Uprights (69). Connect the Upright Wire Harness 81 to the wires extending from the Console Base (81). The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. Insert the connectors and the Upright Wire Harness into 98 the right Upright, and then set the console assembly on the Uprights. Be careful not to pinch the wir
ページ8に含まれる内容の要旨
If you purchase the optional chest pulse sensor (see page 22), follow the steps below to install the re- ceiver and the short jumper wire included with the chest pulse sensor. 1. Make sure that the power cord is unplugged. Remove 1 the indicated screws from the Console Back (88). 82 (Important: The screws may be different lengths; make sure to remember the original location of each screw.) Next, remove the Console Back. 88 Screws 2. Peel the paper off the pad on the bottom of the receiver 2 (A).
ページ9に含まれる内容の要旨
OPERATION AND ADJUSTMENT TM THE PERFORMANT LUBE WALKING BELT plug. Plug the power cord into a surge suppressor, and plug the surge suppressor into an appropriate Your treadmill features a walking belt coated with outlet that is properly installed and grounded in TM PERFORMANT LUBE , a high-performance lubricant. accordance with all local codes and ordinances. IMPORTANT: Never apply silicone spray or other Important: The treadmill is not compatible with substances to the walking belt or the walki
ページ10に含まれる内容の要旨
Program Display Pulse Pulse Sensor Sensor Note: If there is a sheet of clear plastic on the console, remove it. Key Clip FEATURES OF THE CONSOLE through every step of your workout. High-energy music provides added motivation. To purchase iFIT.com The advanced console offers an impressive array of CDs, call 1-888-936-4266. features to help you get the most from your exercise. When the manual mode of the console is selected, the Using the included audio cable, you can also connect speed and incli
ページ11に含まれる内容の要旨
HOW TO USE THE MANUAL MODE CAUTION: Before operating the console, read the following precautions. Insert the key fully into the console. 1 • Do not stand on the walking belt when turn- ing on the power. See HOW TO TURN ON THE POWER at the left. • Always wear the clip (see page 10) while op- Select the manual mode. 2 erating the treadmill. When the key is • Adjust the speed in small increments to inserted, the man- avoid sudden jumps in speed. ual mode will be selected. If a pro- • The pulse
ページ12に含まれる内容の要旨
segment of the program, and your current pace. Change the incline of the treadmill as desired. 4 The display will change from one number to the next every few seconds, as shown by the indica- To change the incline of tors below the display. the treadmill, press the Incline buttons. Each Calories/Pulse time a button is display—When the pressed, the incline will handgrip pulse sensor is change by 0.5%. Note: not being used, this After the buttons are pressed, it may take a mo- display will show t
ページ13に含まれる内容の要旨
moving your hands. When your pulse is detected, HOW TO USE PRESET PROGRAMS the Pulse indicator will light, one or two dashes (– –) will appear in the Calories/Pulse display, and then your heart rate will be shown. For the most Insert the key fully into the console. 1 accurate heart rate reading, continue to hold the contacts for about 15 seconds. See HOW TO TURN ON THE POWER on page 11. Turn on the fans if desired. Select one of the four preset programs. 7 2 To turn on the fans at low speed, pre
ページ14に含まれる内容の要旨
When only three seconds remain in the first seg- To stop the program temporarily, press the Stop ment of the program, both the Current Segment button. The Time/Pace display will begin to flash. column and the column to the right will flash and a To restart the program, press the Start button or series of tones will sound. In addition, if the speed the Speed + button. The walking belt will begin to and/or incline of the treadmill is about to change, move at 1 mph. When the next segment of the pro
ページ15に含まれる内容の要旨
simply adjust the speed and incline of the tread- HOW TO CREATE CUSTOM PROGRAMS mill as desired by pressing the Speed and Incline buttons. Every few times a Speed button is Insert the key fully into the console. pressed, an additional indicator will light or darken 1 in the Current Segment column. See HOW TO TURN ON THE POWER on page 11. During the last three seconds of the first segment, both the Current Segment column and the column Select one of the custom programs. 2 to the right will flash,
ページ16に含まれる内容の要旨
ries of tones will sound, the Speed display and the HOW TO USE CUSTOM PROGRAMS Incline/Distance display will flash, and all speed settings will move one column to the left. The Insert the key fully into the console. speed setting for the second segment will then be 1 shown in the flashing Current Segment column See HOW TO TURN ON THE POWER on page 11. and the treadmill will automatically adjust to the second speed and incline settings that you pro- grammed previously. Select one of the custom pr
ページ17に含まれる内容の要旨
HOW TO CONNECT YOUR PORTABLE STEREO HOW TO CONNECT THE TREADMILL TO YOUR CD PLAYER, VCR, OR COMPUTER Note: If your stereo has an RCA-type AUDIO OUT jack, see instruction A below. If your stereo has a 3.5mm LINE OUT jack, see instruction B. If your To use iFIT.com CDs, the treadmill must be con- stereo has only a PHONES jack, see instruction C. nected to your portable CD player, portable stereo, home stereo, or computer with CD player. See pages A. Plug one end of the audio cable into the jack o
ページ18に含まれる内容の要旨
HOW TO CONNECT YOUR HOME STEREO HOW TO CONNECT YOUR COMPUTER Note: If your stereo has an unused LINE OUT jack, Note: If your computer has a 3.5mm LINE OUT jack, see instruction A below. If the LINE OUT jack is see instruction A. If your computer has only a being used, see instruction B. PHONES jack, see instruction B. A. Plug one end of the audio cable into the jack on the A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the front of the tr
ページ19に含まれる内容の要旨
HOW TO CONNECT YOUR VCR HOW TO USE IFIT.COM CD AND VIDEO PROGRAMS Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV To use iFIT.com CDs or videocassettes, the treadmill with a built-in VCR, see instruction B. If your VCR must be connected to your portable CD player, portable is connected to your home stereo, see HOW TO stereo, home stereo, computer with CD player, or CONNECT YOUR HOME STEREO on page
ページ20に含まれる内容の要旨
If the speed or incline settings are too high or too • Make sure that the audio cable is properly low, you can manually override the settings at any connected, that it is fully plugged in, and that time by pressing the Speed or Incline buttons on it is not wrapped around a power cord. the console. However, when the next “chirp” is heard, the speed and/or incline will change to • If you are using your portable CD player and the next settings of the CD or video program. the CD skips, set the CD pl
