ページ1に含まれる内容の要旨
KEYS 800 TREADMILL
OWNER’S MANUAL
Proudly made in the USA by:
KEYS Fitness Products, LP
P.O. Box 551239
Dallas, Texas 75239
www.keysfitness.com
ページ2に含まれる内容の要旨
TABLE OF CONTENTS PAGE Table of Contents 2 Important Safety Information 3 Before You Start 4 Warm Up Exercises 5 Assembly Instructions 6 Power Requirements 7 Console Functions and Descriptions 8 Program and Operating Instructions 9, 10 Program Descriptions and Profiles 11 Belt Adjustments and Tension 12 Change to MPH or Km/H 13 Maintenance Instructions 14 Troubleshooting Guide 15 Parts and Diagrams 16, 17, 18 Warranty Registration (Mail In Form) 19 2
ページ3に含まれる内容の要旨
Important Safety Information NING! 1) WARNING: Before using this treadmill or starting any exercise program, consult your physician. This is especially important for persons over the age of 35 and/or persons with pre-existing health problems. The manufacturer or distributor assumes no responsibility for personal injury or property damage sustained by or through the use of this product. 2) WARNING: To reduce the risk of electrical shock, burns, fire, or other possible injuries to the user
ページ4に含まれる内容の要旨
Before You Start Thank you for purchasing a KEYS treadmill! This quality product you have chosen was designed to meets your needs for cardiovascular exercise. • Before you start, please read the Owner’s Manual and become familiar with the operation of your new treadmill. • Remember to take the time to perform the stretching exercises provided to avoid injury. • Do not stand on the walking belt while pressing the Power button or Start/Stop button. • Always adjust the speed of t
ページ5に含まれる内容の要旨
Warm Up Exercises NING! WARM UP FIRST ! Warming up prepares the body for exercise by increasing circulation, supplying more oxygen to the muscles and raising body temperature. Begin each workout with 5 to 10 minutes of stretching and light exercise to warm up. The drawings on this page show several forms of basic stretching you may perform before your workouts. Again, consult a physician before starting this or any other exercise program. 15 Seconds for each 20 Seconds 20 Seconds 2
ページ6に含まれる内容の要旨
Assembly Instructions Assembly KEYS treadmills are shipped in one piece to make assembly easy. After opening the box, remove any packing materials from the treadmill. Do not throw away any packing materials until the unit is working properly. Place the base on a clean, level surface. Make sure the electrical cord will easily reach an electrical outlet. 1) Have a second person raise the console to the upright position and hold. 2) Insert the TUBE SPACER inside the upright frame and li
ページ7に含まれる内容の要旨
Power Requirements WARNING! IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN A RISK OF AN ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT THE OUTLET, HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN. This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Volt
ページ8に含まれる内容の要旨
Console Functions and Descriptions There are five display windows on the control panel to provide feedback information. TIME WINDOW • TIME: Indicates elapsed time after pressing start in minutes and seconds (0-99 minutes, 0-59 seconds) • INTERVAL TIME: Indicates countdown in seconds to the next interval starting at 5 seconds and counting to 0 seconds SPEED WINDOW • SPEED: Indicates MPH up to 10MPH (miles per hour) or KMH (kilometer per hour) in .1 increments DISTANCE / CALORIES WI
ページ9に含まれる内容の要旨
Program and Operating Instructions QUICK START / MANUAL MODE • Plug into a standard wall outlet (110-Volt AC, 15-amp circuit). • Attach RED Safety Key to treadmill console. • Stand on the treadmill and straddle belt. • Press POWER button. There will be an eight (8) second delay after pressing the POWER button before data can be entered. The TIME window will flash. Press START/STOP button. Belt will begin to move after 4 seconds. Step on belt slowly after • the belt starts moving. S
ページ10に含まれる内容の要旨
Program and Operating Instructions PROGRAM MODE • Plug into a standard wall outlet (110-Volt AC, 15-amp circuit). • Attach RED Safety Key to treadmill console. • Stand on the treadmill and straddle belt. • Press POWER button. There will be an eight (8) second delay after pressing the POWER button before data can be entered. The TIME window will flash. • There are three (3) pre-set programs on the Keys 800, Fat Burn, Cardio, and Warm Up programs (see the program profiles later in thi
ページ11に含まれる内容の要旨
Program Profiles The FAT BURN program is designed to vary The CARDIO program is designed to vary treadmill elevation while maintaining a constant treadmill speed while maintaining a constant walking speed. Set the desired maximum speed incline. Set the desired maximum speed and and incline, and the treadmill will automatically incline, and the treadmill will automatically change the incline to the set amount, alternating change the speed to the set amount, alternating in segments 2-
ページ12に含まれる内容の要旨
Belt Adjustment and Tension WARNING! Do not overtighten rollers! This will cause premature roller bearing failure! Belt adjustment and tension performs two functions: adjustment for tension and centering. Your new treadmill comes pre-adjusted from the factory for tension and centering. Please follow the procedures below if the belt shifts left or right or if the belt slips while walking: WALKING BELT HAS SHIFTING TO THE LEFT (Diagram 1) First, unplug the power cord from the surge prot
ページ13に含まれる内容の要旨
Change Miles per hour to Kilometers per hour Your treadmill will operate in British Units (miles per hour) or International Units (kilometers per hour). All treadmills are calibrated at the factory for British Units (miles per hour). To change the display to read in kilometers, follow the steps described here: 1)Power is turned OFF on the console. Attach the magnet safety key to the console. 2) Activate the calibration mode switch by inserting the eraser end of a pencil into the op
ページ14に含まれる内容の要旨
Maintenance Instructions WARNING! Before performing any maintenance to your treadmill, always unplug the power cord from the surge protector. CLEANING Routine cleaning of your Keys Fitness treadmill will extend the life of your treadmill. WARNING! To prevent electrical shock, be sure the power to the treadmill is OFF and the unit unplugged from the wall electrical outlet before attempting any cleaning or maintenance. AFTER EACH WORKOUT: Wipe off the console and other treadmill surfaces
ページ15に含まれる内容の要旨
Troubleshooting Guide Treadmill will not start. 1) Is the RED Safety Key Attached to the Console? 2) Make sure the power cord is plugged into a surge protector, the surge protector is plugged into a properly grounded outlet, and the surge protector is turned on. (Refer to “Power Requirements”) 3) Check the circuit breaker located on the front of the treadmill. If the switch protrudes, it has tripped. Wait five minutes and then press the switch back in. 4) Check the house electrical bre
ページ16に含まれる内容の要旨
Parts List - KEYS 800 Treadmill KEY # PART # DESCRIPTION QTY KEY # PART # DESCRIPTION QTY 1 23-0064 UPRIGHT ASSEMBLY D. GRY 1 53 08-0004 CIRCUIT BREAKER 15 AMP 1 2 23-0063 DECK ASSEMBLY D GRY 1 58 14-0069 END CAP DECAL 2 FRONT ELEVATION ASSEMBLY 1 SCREW, 8X 5/8 PHIL PH 29 3 23-0050 67 02-0004 MOTOR MOUNTING BRACKET 1 SCREW, 8X 5/8 PHIL PH HILO 12 7 19-0014 68 02-0005 8 19-0015 MOTOR COVER BRACKET 7 69 02-0006 BOLT, 5/16 X 5 - 1/2 SHOULDER BOLT 1 10 19-0019 BELT GUIDE 2 7
ページ17に含まれる内容の要旨
KEYS 800 Treadmill KEYS FITNESS PRODUCTS, LP – LIMITED WARRANTY PLEASE CONSULT YOUR PHYSICIAN BEFORE USING THIS PRODUCT. This Limited Warranty applies in the United States, Canada, and Mexico to products manufactured or distributed by Keys Fitness Products, LP (“Keys”) under the KEYS brand name. The warranty period to the original purchaser is (lifetime) on the frame, (3) years on the motor, (2) years on parts, and (1) year labor. Keys warrants t
