ページ1に含まれる内容の要旨
Model No. IMTL39105.0
Serial No.
USER'S MANUAL
Serial Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if parts are
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.
CALL TOLL-FREE:
1-800-753-4645
Mon.–Fri., 6 a.m.–6 p.m. MST
ON THE WEB:
www.iconservice.com
CAUTION
Visit our website at
Read all precautions and instruc-
tions in this manual before using
www.imagefitness.com
this equi
ページ2に含まれる内容の要旨
TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 O
ページ3に含まれる内容の要旨
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. 1. It is the responsibility of the owner to ensure 11. Failure to use a properly functioning surge that all users of this treadmill are adequately suppressor could result in damage to the con- informed of all warnings and precautions. trol system of the treadmill. If the control sys- tem is damaged, the wa
ページ4に含まれる内容の要旨
20. Inspect and properly tighten all parts of the scribed in this manual. Never remove the treadmill every three months. motor hood unless instructed to do so by an authorized service representative. Servicing 21. Never drop or insert any object into any open- other than the procedures in this manual ing. should be performed by an authorized service representative only. 22.DANGER: Always unplug the power cord immediately after use, before cleaning 23. The treadmill is intended for in-home use th
ページ5に含まれる内容の要旨
BEFORE YOU BEGIN ® Thank you for selecting the new IMAGE 15.0 R tread- number and serial number before calling. The model mill. The IMAGE 15.0 R treadmill offers a selection of number of the treadmill is IMTL.39105.0. The serial features designed to make your workouts at home number can be found on a decal attached to the tread- more enjoyable and effective. And when you’re not ex- mill (see the front cover of this manual for the location). ercising, the unique IMAGE 15.0 R treadmill can be fol
ページ6に含まれる内容の要旨
ASSEMBLY To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench and your own Phillips screwdriver and needlenose pliers . Note: The underside of the treadmill walking belt is coated with high-performance l
ページ7に含まれる内容の要旨
2. Identify the Right Upright (9) and the Left Upright (61). 2 42 Straighten the Upright Wire (42), and feed it into the lower end of the Right Upright (9) and out of the upper end. Next, hold the Right Upright against the right side of the 9 Base (69); make sure that the Right Upright is turned 69 so that the upper end is angled in the direction shown. Hand tighten two 3” Bolts (37) with two 5/16” Star Washers (97) into the Base and the Right Upright; be careful not to damage the Upright Wire
ページ8に含まれる内容の要旨
4. Hold the Console Base (47) near the Left Handrail (71). 4 Attach the end of the ground wire on the Console Base to the indicated small hole in the Left Handrail with the Ground Silver Ground Screw (75). Wire 47 Small Hole 75 71 5. Touch the Right Handrail (72) to discharge any static. 5 Slide the sleeve off the connector on the Upright Wire (42) as shown in the inset drawing. Next, press the end of the Upright Wire into the socket in the bottom of the Console Base (47). The connector should s
ページ9に含まれる内容の要旨
7. Cover the Upright Wire (42) with the Right Grip Plate 7 47 (36). Be careful not to pinch the Upright Wire. Tighten three 1/2” Screws (48) into the Right Grip Plate and the Console Base. Ground Attach the Left Grip Plate (34) over the ground wire and Wire the other wires with three 1/2” Screws (48). Be careful 42 not to pinch any of the wires. 36 34 48 48 8. Lower the Uprights (9, 61) until the handrails are touch- 8 ing the floor. See the lower drawing. Position the Uprights (9, 61) so Hand
ページ10に含まれる内容の要旨
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT tric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding Your treadmill features a walking belt coated with high- plug. Plug the power cord into a surge suppressor, performance lubricant. IMPORTANT: Never apply sil- and plug the surge suppressor into an appropriate icone spray or other substances to the walking outlet that is properly installed and grounded in belt or the walking platform. Su
ページ11に含まれる内容の要旨
CONSOLE DIAGRAM Note: If there are thin sheets of plastic Key Clip on the console, remove the plastic. FEATURES OF THE CONSOLE Preset Programs The console also features four preset programs. Each The treadmill console offers a selection of features program automatically controls the speed and incline designed to make your workouts more effective. When of the treadmill as it guides you through an effective the manual mode of the console is selected, the speed workout. and incline of the treadmil
ページ12に含まれる内容の要旨
Change the incline of the treadmill as desired. HOW TO USE THE MANUAL MODE 4 To change the incline of the treadmill, press the Insert the key into the console. Incline increase and decrease buttons. Each time 1 a button is pressed, the incline setting will change See HOW TO TURN ON THE POWER on page by 0.5%; if a button is held down, the incline set- 11. ting will change quickly. Select the manual mode. Follow your progress with the three displays. 2 5 When the key is in- The left display—Thi
ページ13に含まれる内容の要旨
Measure your heart rate if desired. HOW TO USE THE MYTRACKS™ 6 STEPCOUNTER PROGRAM To measure your heart rate, Pulse Sensor stand on the Insert the key into the console. foot rails and 1 place your left See HOW TO TURN ON THE POWER on page thumb on the 11. pulse sensor. Do not press Select the MyTracks™ StepCounter program. too hard, or 2 the circulation in your thumb will be restricted Press the 10,000 Steps and your pulse will not be detected. When your Program button; a goal pulse is detecte
ページ14に含まれる内容の要旨
To stop the program temporarily, press the Stop HOW TO USE A PRESET PROGRAM button. The time will begin to flash in the right dis- play. To restart the program, press the Start button or the Speed increase button. The walking belt will Insert the key into the console. 1 begin to move at 2 mph. To end the program, See HOW TO TURN ON THE POWER on page press the Stop button, remove the key, and then 11. reinsert the key. Follow your progress with the displays. Select a preset program. 4 2 See step
ページ15に含まれる内容の要旨
To stop the program temporarily, press the Stop THE INFORMATION MODE button. The time will begin to flash in the right dis- play. To restart the program, press the Start button The console features an information mode that keeps or the Speed increase button. The walking belt will track of treadmill usage information and allows you to select a unit of measurement for the console. begin to move at 1 mph. When the next period of the program begins, the treadmill will automatically To select the in
ページ16に含まれる内容の要旨
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE 1 Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- manently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill. 1. Hold the treadmill with your hands in the locations shown by the arrow at the right. Raise the treadmill about halfway to the vertical position. To decreas
ページ17に含まれる内容の要旨
TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call the toll-free telephone number on the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 10). Use only a single-outlet surge suppres- so
ページ18に含まれる内容の要旨
PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 10. b. If the walking belt is overtightened, treadmill perfor- b mance may decrease and the walking belt may be- 2”–3” come damaged. Remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side o
ページ19に含まれる内容の要旨
CONDITIONING GUIDELINES ergy. Only after the first few minutes does your body begin to use stored fat calories for energy. If your goal WARNING: Before beginning this is to burn fat, adjust the speed or incline of the tread- or any exercise program, consult your physi- mill until your heart rate is near the lowest number in cian. This is especially important for individu- your training zone. als over the age of 35 or individuals with pre- existing health problems. For maximum fat burning, adjus
ページ20に含まれる内容の要旨
PART LIST—Model No. IMTL39105.0 R0605A To locate the parts listed below, see the EXPLODED DRAWING. Key Key Key No. Qty. Description No. Qty. Description No. Qty. Description 1 1 Hood 37 2 3” Bolt 74 1 Left Foot Rail Endcap 2 19 3/4” Screw 38 2 Washer 75 1 Silver Ground Screw 3 1 Motor Belt 39 4 1” Tek Screw 76 2 Handrail Endcap 4 1 Motor Tension Bolt 40 4 Fan Cover Screw 77 4 Wire Tie 5 5 3/8” Washer 41 1 Small Star Washer 78 1 Reset/Off Switch 6 2 Motor Star Washer 42 1 Upright Wire 79 1 Power
