ページ1に含まれる内容の要旨
Marley MS Cooling Tower
/ /
ページ2に含まれる内容の要旨
SPX Cooling Technologies has worldwide recognition as the pacesetter in the field of water cooling technology. Unique within its industry in the scope of SPX COOLING products and services offered,we TECHNOLOGIES design and manufacture cooling towers of virtually any capacity and configuration. More than 400 Marley tower models are available to service the application requirements of air conditioning, industrial processing and electric generation. More simply stated, there’s a Marle
ページ3に含まれる内容の要旨
ページ4に含まれる内容の要旨
ページ5に含まれる内容の要旨
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
ページ8に含まれる内容の要旨
FILL: Marley MC high performance PVC film fill sheets are thermoformed at the Marley factory to exacting quality and strength standards. Maximum performance and clog resistant designs are both available for a wide range of thermal and COMPONENTS water quality requirements. ® ELIMINATORS: Marley XCEL drift eliminator panels—formed from PVC sheets into a cellular configuration—offer the lowest drift rates in the industry. They significantly lower air pressure losses, reducing fan
ページ9に含まれる内容の要旨
GEAREDUCERS: Marley FANS: Designed, tested and ® Geareducer drives are the manufactured by Marley, fan industry quality standard. They materials include cast aluminum are designed to meet or exceed alloy, glass reinforced polyester the requirements of CTI STD-111 and glass reinforced epoxy. Fan and AGMA Std, 420.4, and are run- sizes and materials are selected in under load prior to shipment. to be compatible with individual Numerous reduction ratios are application requirements. avai
ページ10に含まれる内容の要旨
MECHANICAL EQUIPMENT FAN CYLINDERS: Marley FRP SUPPORT: The Marley hot- fan cylinders feature venturi dipped galvanized torque shaped eased inlets and close tube unitized support assures fan tip clearance for maximum permanent alignment of the motor, efficiency. If required, a concrete driveshaft and Geareducer. fan cylinder may be utilized. DISTRIBUTION SYSTEM: Marley- STRUCTURE: Normal structure patented non-clogging, large consists of 8" thick concrete diameter NS spray nozzles assu
ページ11に含まれる内容の要旨
SPECIFICATIONS FILL: Heat transfer fill media shall be crosscorrugated COOLING TOWER: Furnish and install (1) Induced 20 mil PVC sheets supported by stainless steel tubes Draft Counterflow Cooling Tower. Cooling tower which, in turn, are suspended by stainless steel tension shall be______ft. long x ______ft. wide x ______ ft. hangers from concrete support beam members. overall height with a maximum operating weight of______lbs. Cooling tower shall consist of_____fan DRIFT ELIMINATORS:
ページ12に含まれる内容の要旨
7401 WEST 129 STREET OVERLAND PARK, KANSAS 66213 UNITED STATES 913 664 7400 spxcooling@spx.com spxcooling.com In the interest of technological progress, all products are subject to design and/or material change without notice. ©2008 SPX Cooling Technologies, Inc. Printed in USA | MS-06
