ページ1に含まれる内容の要旨
NEC NEAX 2000 and 2400 System
LinkPlus Interface Guide
SpectraLink 6000 System
SpectraLink 8000 System
July 2008 Edition
1725-36138-001
Version E
ページ2に含まれる内容の要旨
LinkPlus Interface Guide: NEC NEAX 2000 and 2400 System Trademark Information Notice Polycom® and the logo designs Polycom, Inc. has prepared this document for SpectraLink® use by Polycom personnel and customers. The LinkPlus drawings and specifications contained herein Link are the property of Polycom and shall be neither NetLink reproduced in whole or in part without the prior SVP written approval of Polycom, nor be implied to Are trademarks and registered trademarks of grant any li
ページ3に含まれる内容の要旨
About this Guide Polycom is the market leader in multi-cellular wireless telephone systems for the workplace. We manufacture a range of products to suit any size installation. All Polycom products use our LinkPlus digital integration technology to integrate with various digital switch platforms. Using LinkPlus technology, Wireless Telephones (handsets) emulate digital telephone sets to deliver advanced capabilities such as multiple line appearances and LCD display features. This docume
ページ4に含まれる内容の要旨
LinkPlus Interface Guide: NEC NEAX 2000 and 2400 System Related Documents SpectraLink 6300 MCU : Operator’s Console (1725-36125-001) SpectraLink 6100 MCU: Installation and Operation (1725-36097-001) SpectraLink 6020 Wireless Telephone and Accessories User Guide (1725-36092-001) Available at http://www.polycom.com/usa/en/support/voice/proprietary_wire less/proprietary_wireless.html SpectraLink 8000 Telephony Gateway: Administration Guide for SRP (1725-36028-001) SpectraLink 8020/8030
ページ5に含まれる内容の要旨
About this Guide Icons and Conventions This manual uses the following icons and conventions. Caution! Follow these instructions carefully to avoid danger. Note these instructions carefully. Label This typeface indicates a key, label, or key on SpectraLink hardware. PN: 1725-36138-001_E.doc 5
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
1 Plan the Interface The system administrator programs the telephone system for use with the Wireless Telephone System using the normal administration terminal or procedures. Programming can be done after the handsets are registered. Recommended programming includes assigning extension numbers to the handsets and programming features on the telephone system so they are easily accessible from the handsets. For analog interfaces, macro codes are in the document relating to configuring t
ページ8に含まれる内容の要旨
LinkPlus Interface Guide: NEC NEAX 2000 and 2400 System “model” handsets then use the model as a template to program the other handsets. • All handsets are different: All handsets are programmed differently, so each handset will be programmed individually. Before installation, the parameters of the wired phones should be verified to plan the parameters required for the handsets. Line assignment The handset supports up to nine line resources. Which lines should ring at this handset and w
ページ9に含まれる内容の要旨
Plan the Interface Assign Extension Numbers The wire contractor should inform the system administrator which port numbers have been designated for the handsets. The system administrator may use the Extension Assignments Worksheet at the end of this document to track the port numbers, extensions, users, and features assigned to handsets. The Wireless Telephone Display The SpectraLink Wireless Telephone will display the telephone number as it is dialed. The NEAX ETJ-16DC-2 has a two-line
ページ10に含まれる内容の要旨
LinkPlus Interface Guide: NEC NEAX 2000 and 2400 System Feature Programming Requirements When planning the interface, the following information must be taken into account: Line sequences The handset uses two types of key sequences to access PBX features and multiple lines. Line sequences are those where the user presses the LINE key and then a number key. The key-map design designates “line” keys that should be programmed for line appearance so that they correspond to line sequences on
ページ11に含まれる内容の要旨
Plan the Interface SpectraLink 6100 MCU For the SpectraLink 6100 MCU, the handset function menu text can only be changed via remote configuration through the services of Polycom’s Customer Support. SpectraLink 8000 Telephony Gateways Function menu text options can be changed in the Administration Console of the SpectraLink 8000 Telephony Gateways. Hold The Hold feature should be programmed to the Hold key as shown on the key-map diagrams so that when the Hold key or softkey is pressed
ページ12に含まれる内容の要旨
ページ13に含まれる内容の要旨
2 NEC NEAX 2000 and 2400 This section describes the recommended programming to use the Wireless Telephone System with an NEC NEAX 2000 or NEAX 2400 telephone system. The procedures assume: • The NEAX is installed and operational in an approved configuration. See Telephone Switch Interface Matrix for tested configurations. • A trained NEAX technician or system administrator will be on site with the Installer to program the system. • The SpectraLink 6000 System or SpectraLink 8000 Telep
ページ14に含まれる内容の要旨
LinkPlus Interface Guide: NEC NEAX 2000 and 2400 System Configuration. Scroll to Telephone Switch Type and press enter to change this field, from the Submenu of PBX types, select NEC NEAX. Refer to SpectraLink 8000 Telephony Gateway: Administration Guide for SRP for details on configuring the Telephone Switch Type. Key-mapping the Handset to Emulate ETJ-16DC- 2 Functionality LINE + 1 LINE + 2 LINE + 3 LINE + 4 LINE + 5 LINE + 6 LINE + 7 LINE + 8 LINE + 9 FCN + 6 FCN + 7 FCN + 8 FCN + 9
ページ15に含まれる内容の要旨
NEC NEAX 2000 and 2400 The handset function menu default settings are shown in the table below; these may be changed as described above in Function Menu Programming. Some of these functions (Mute, Redial, Forward, etc.) are activated by softkeys or FCN menu options on the SpectraLink 6000 and SpectraLink 8020/8030 Wireless Telephones. FCN + 0 FCN + 1 FNC MUTE FCN + 2 FCN + 3 TRF CNF FCN + 4 FCN + 5 LNR/SPD RECALL FCN + * EXIT MENUS Program NEC NEAX The System Administrator progr
ページ16に含まれる内容の要旨
LinkPlus Interface Guide: NEC NEAX 2000 and 2400 System • Class of Service: Assign the handsets to the Class of Service with the appropriate features or functions. [delete dash to make this one sentence, or is it more correct to have a colon then a new sentence, imperative?] • Coverage and Pickup Groups: Assign the handsets to a coverage and/or pickup group so unanswered calls will be appropriately covered. • Unused features: Disable any speakerphone or loudspeaker features (such as voi
ページ17に含まれる内容の要旨
3 Extension Assignments Worksheet Shelf: _______ Interface Module: _______ Interface Handset Handset # Ext. # Name Module Comment Serial # Circuit # Handset 1 1 Handset 2 2 Handset 3 3 Handset 4 4 Handset 5 5 Handset 6 6 Handset 7 7 Handset 8 8 Handset 9 9 Handset 10 10 Handset 11 11 Handset 12 12 Handset 13 13 Handset 14 14 Handset 15 15 Handset 16 16 PN: 1725-36138-001_E.doc 17
