ページ1に含まれる内容の要旨
®
Model No. IMSB62820
USER’S MANUAL
IMSG62820
Serial No.
The serial number is on a plastic sign
inside the spa behind the access
panel. Write the serial number in the
space above for reference.
Access
Panel
QUESTIONS?
If you have questions, or if there
are missing parts, we will guar-
antee complete satisfaction
through direct assistance from
our factory.
TO AVOID DELAYS, PLEASE
CALL DIRECT TO OUR TOLL-
FREE CUSTOMER HOT LINE.
The technicians on our customer
hot line will provide immediate
ass
ページ2に含まれる内容の要旨
Table of Contents Posting the Warning Sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Choosing a L
ページ3に含まれる内容の要旨
Important Safety Instructions WARNING: To reduce the risk of drowning, electric shock, or serious injury, read the fol- lowing important precautions before using the hydrotherapy spa. READ AND FOLLOW ALL INSTRUCTIONS 1. It is the responsibility of the owner to ensure 10. Never insert any object into any opening. that all users of the hydrotherapy spa are 11. Do not use breakable containers in or near adequately informed of all precautions. the hydrotherapy spa. 2. Use the hydrotherapy spa only a
ページ4に含まれる内容の要旨
20. DANGER—Risk of electric shock. Keep all physician before using the hydrotherapy spa. electrical appliances such as radios, tele- Pregnant women should not use the spa if phones, televisions, and lights at least five the water temperature is above 100°F; the feet away from the water. unborn child could be seriously harmed. This is especially important during the first 90 21. A wire connector is provided on the electron- days of the pregnancy. ics pack of the hydrotherapy spa to connect a 2 mi
ページ5に含まれる内容の要旨
35. WARNING: The spa jets produce a stream of water with relatively high pressure. Prolonged exposure of a localized area of the body may cause bruises to the skin. 36. The included warning sign must be posted where all users of the hydrotherapy spa can see and read it. (See POSTING THE WARNING SIGN on page 2.) 37. WARNING DECAL PLACEMENT: Locate the decals shown below and familiarize yourself with the information on the decals. WARNING: Read all instructions before using the hydrotherapy spa. I
ページ6に含まれる内容の要旨
Before You Begin Thank you for selecting the innovative RENEW 628 For your safety and benefit, read this manual care- ® hydrotherapy spa by IMAGE . The RENEW 628 fully before using the RENEW 628. If you have addi- hydrotherapy spa offers the features and quality of a tional questions, please call our Customer Service traditional hot tub at an affordable price, giving you the Department toll-free at 1-877-897-7493, Monday benefits of hydrotherapy in the comfort and privacy of through Friday, 5 a.
ページ7に含まれる内容の要旨
Choosing a Location for the Hydrotherapy Spa There are many factors to consider when choosing a location to set up the hydrotherapy spa. These factors vary depending on whether you plan to use the spa inside or outside. We have listed several factors you may wish to consider as you decide where to set up the spa. If you set up the hydrotherapy spa inside: If you set up the hydrotherapy spa outside: 1. The spa will increase the level of humidity in your 1. Check local building codes concerning th
ページ8に含まれる内容の要旨
Assembly Before beginning assembly, carefully read the ASSEMBLY REQUIRES THE FOLLOWING following information and instructions: TOOLS (not included): • Place all parts in a cleared area and remove the • One phillips screwdriver packing materials from the spa shell. Do not dis- pose of the packing materials until assembly is • You will also need a small amount of soap and completed and the spa is operating. a damp cloth. • During assembly, make sure that all parts are A wire connector is provide
ページ9に含まれる内容の要旨
3. The hydrotherapy spa operates on a 240-volt power source and must be wired directly to a 30 amp Ground Fault Circuit Interrupter (GFCI) installed in your home. This procedure must be performed by a qualified, licensed electrician. A wiring diagram is found on the inside of the electronics package for reference. Under no circumstances should the spa be wired by someone other than a qualified electrician. Before you have the spa wired, make sure it is in the desired position, and that it can be
ページ10に含まれる内容の要旨
Using the Hydrotherapy Spa The hydrotherapy spa is designed to seat six adults. CONTROLS on page 12). Once the spa is running, The spa holds 300 gallons of water and offers a heat- press the GFCI “test” button. The spa should shut off. ing system (80°F to 104°F), a filtration system, and Press the “reset” button. The spa should resume nor- adjustable hydrotherapy jets. Follow the guidelines mal operation. If the spa continues to run after the below to use and maintain the spa for your long-term
ページ11に含まれる内容の要旨
Spa Shell Diagram J M L L1 J N N L1 Seat 2 M N N I Seat 1 Seat 3 K B F L C D Seat 4 F E Seat 5 H K O G Seat 6 K L1 L K A A. The filter can be removed for cleaning or replace- H. The console controls the spa jets, turns the underwa- ment (see CHECKING AND CLEANING THE FILTER ter light on and off, and adjusts the water temperature CARTRIDGE on page 13). setting (see USING THE CONTROLS on page 12). B. The underwater light can be used for night opera- I. The three air controls regulate the air
ページ12に含まれる内容の要旨
Using the Controls Air Controls Display Temp Pump Light Temp Up Button Button Down Refer to the diagram above. The function of each The spa also features an automatic mode that heats control is explained below: and filters the water when the spa is left unattended. When the power to the spa is first turned on, or if the Temperature Buttons: Control the temperature setting water temperature is below the set temperature, the of the water. The temperature can be set from 80°F to water will be hea
ページ13に含まれる内容の要旨
Maintenance The hydrotherapy spa is designed to provide years of hose to remove any cleaner residue. Dry the cover enjoyment. Please follow the guidelines below to entirely. Use a non-silicone-based vinyl conditioner on properly maintain your spa. the cover after you clean it. This will help protect the cover from sun damage. MAINTENANCE SCHEDULE CHECKING AND CLEANING THE FILTER Daily CARTRIDGE • Check the water level and refill the spa to the level shown in step 4 on page 9. The filter cartridg
ページ14に含まれる内容の要旨
5. Keep containers closed tightly when not in use. REMOVING AND ATTACHING THE ACCESS PANEL 6. Never add water to the chemicals—always add the chemicals to the water as directed. To locate the access panels, refer to the drawing on 7. Always store chemicals in a cool, dry place. page 6. Turn off the power to the spa. To remove an access panel, first remove the four indicated screws. MAINTAINING THE PROPER PH BALANCE Slide the access panel down and then pull the bottom of it away from the spa. Not
ページ15に含まれる内容の要旨
To drain the hydrotherapy spa, follow the steps below: WINTER USE AND CARE 1. Using the console, adjust the temperature to the The hydrotherapy spa is designed for year-round use. lowest setting. If you decide to store the spa for the winter, store it in 2. Shut off the power to the spa, at the circuit breaker a warm, dry location. Follow the steps below to winter- or GFCI. ize the spa. 3. Remove the pump access panel from the spa. 1. Make sure the power to the spa is turned off. 4. Pull the hos
ページ16に含まれる内容の要旨
Troubleshooting Most problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our Customer Service Department toll-free at 1-877-897-7493, Monday through Friday, 8 a.m. until 5 p.m. Central Time. 1. SYMPTOM: THE SPA WILL NOT OPERATE tained at 70°F, it will take approximately 6 to 8 hours for the water to reach the set temperature. a. Check to see if the GFCI breaker is tripped or was not turned o
ページ17に含まれる内容の要旨
10. SYMPTOM: THE SPA JET UNIT CONTINUES Overheating may occur if the filter cycle is set too TO RUN AFTER IT HAS BEEN SHUT OFF long. At 110° F the spa should reset itself. If the high-limit sensor detects 118° F at the heater, the a. To turn the main jets off, press pump button spa will shut down. When the heater cools to 110° once or twice. Note: If the actual spa water F press any button to reset the spa. If the spa will temperature is below the set temperature, or if not reset, shut off power
ページ18に含まれる内容の要旨
PART LIST Model Nos. IMSB62820, IMSG62820 R0602A — Key No. Qty. Description Key No. Qty. Description 1 1 Thermometer Fitting 33 1 Face Plate Assembly 2 1 4-wire Power Cord 34 3 Panel 3 1 Filter Cover 35 4 1/4” Lock Washer 4 4 Corner Panel 36 1 Filter Housing* 5 1 Filter Cartridge 37 4 Medium Jet Housing 6 32 #10 x 2” Sheet Metal Screw 38 1 Console With Overlay 7 1 Blue Light Cover 39 1 Large Massage Jet 8 1 Red Light Cover 40 4 Nozzle Housing 9 4 #10 x 1 1/2” Sheet Metal Screw 41 10 Jet Ring 10
ページ19に含まれる内容の要旨
EXPLODED DRAWING Model Nos. IMSB62820, IMSG62820 R0602A — 11 24 19* 35 13 35 20 3 46 46 22 20 13 32 10 16 33 48 45 23 1 5 9 36* 30 49 14* 29 38 9 49 30 47 26 28 28 18 27 6 6 50 15 34 6 6 4 25 2 37 21 44 43 31 39 53 42 52 40 41 17 17 41 12 51 8 7 19
ページ20に含まれる内容の要旨
Ordering Replacement Parts To order replacement parts, simply call our Customer Service Department toll-free at 1-877-897-7493, Monday through Friday, 8 a.m. until 5 p.m. Central Time (excluding holidays). To help us assist you, please be prepared to give the following information when calling: • The MODEL NUMBER of the product (IMSB62820 or IMSG62820) • The NAME of the product (RENEW 628 hydrotherapy spa) • The SERIAL NUMBER of the product (see the front cover of this manual) • The KEY NUMBER a
