ページ1に含まれる内容の要旨
Panasonic_X100_O/I
X100EN1CP1
Operating Instructions Part 1
Digital Cellular Phone
All screen images in this manual are simulated.
Some phone colours may not be available in every country.
Mobile Mobile Phone Phone
Before operating this handset, please read these
Panasonic Mobile & Automotive Systems Czech s.r.o. Printed in Czech Republic instructions (parts 1 and 2) completely.
Pardubice, Czech Republic Charge battery before operation.
ページ2に含まれる内容の要旨
Contents Appearance............................1 Camera................................. 60 Part Names ...........................1 Camera Appearance .......... 60 Keys and Symbols ................2 Preview mode..................... 62 Icons .....................................3 Capture mode..................... 66 Getting Started ......................4 Messages............................. 67 Battery and SIM ....................4 Settings .............................. 67 Create..............
ページ3に含まれる内容の要旨
Appearance Part Names Personal Handsfree Earpiece Connector Display Right soft key Centre key Navigation key Left soft key Power/End key Send key Hash/Quiet key Asterisk/Shift key Microphone Self-portrait Battery cover Camera lens mirror Charging connector Appearance 1
ページ4に含まれる内容の要旨
Keys and Symbols Keys Description Centre key: Press in the centre of the Navigation key to select or enter the menu options. < In idle screen: Press to enter the main menu. Press and hold to enter the Mobile lock menu. Navigation key: Move the cursor in each directions. 051 In idle screen: Press 1 or 5 to enter the Contacts list. Press 37 7 to display the Calendar. Press 3 to enter My Media menu. Left soft key: Perform the functions indicated in the lower left corner of the display. A In idl
ページ5に含まれる内容の要旨
Icons Status Icons The status icons are displayed depending on the currently activated functions. Status icons Idle screen Left soft key Right soft key selection area selection area Centre key selection area – – – Indicates Battery level page 5 Green Red On non-home network – Roaming (F) page 97 Received new messages page 70 Media Folder is full Alarms are set page 83 Call diverts are enabled page 34 Voicemail is enabled page 48 Ringtone is enabled Vibration mode page 26 Vibration
ページ6に含まれる内容の要旨
Getting Started Battery and SIM Before opening the battery cover, ensure that the phone is switched off and the charger is disconnected from the phone. Battery Removing the battery 1. Press the tab on the bottom edge of the cover (N) 2. Remove the battery cover (O) 3. Push the lower part of the battery forward (P) 4. Lift the battery to remove (Q) Attaching the battery 1. Insert the upper edge of the battery (N) 2. Push down on the lower edge of the battery carefully until it clicks (O) 3. Inse
ページ7に含まれる内容の要旨
Charging the battery It is recommended to charge the battery for a minimum of 4 hours before the first use. Ensure the battery is correctly in place before connecting the charger. Connecting the plug 1. Insert the plug arrow side up 2. Push the charger all the way in 3. The battery level indicator will start moving (see “Battery level indicator” below) Note: DO NOT force the connector as this may damage the phone and/or the charger. Disconnecting the plug Pull the plug gently from the connec
ページ8に含まれる内容の要旨
SIM Attaching the SIM 1. Remove the battery cover and the battery (see “Removing the battery” on page 4) 2. Insert the SIM into the SIM holder 3. Replace the battery and the battery cover Note: Ensure the gold contacts on the SIM and the phone body are facing each other. Removing the SIM 1. Remove the battery cover and the battery (see “Removing the battery” on page 4) 2. While holding the tab down, gently slide the SIM out 3. Replace the battery and the battery cover 6 Getting Started
ページ9に含まれる内容の要旨
Basic Operation Switching On/Off Switching On 1. Press and hold D (Power/End) for 2 to 3 seconds 2. The start-up animation will start 3. Customisable Greeting will be displayed for 2 seconds (see “Greeting” on page 28) 4. The display will remain in idle screen Switching Off Press and hold D (Power/End) for 2 to 3 seconds Basic Operation 7
ページ10に含まれる内容の要旨
Mobile lock On/Off You can lock your phone to avoid accidental or intentional misuse of it. Key guard Key guard is used to prevent any keys from being accidentally pressed. In idle screen 1. Press and hold < (Menu) 2. Press < (On) 3. Press < (OK) To release Key guard 1. Press < () 2. Press < (OK) Phone lock See “Phone lock” on page 35. 8 Basic Operation
ページ11に含まれる内容の要旨
Making a Call Before making a call, ensure that the phone is switched on, the signal strength meter shows network coverage is available in the current area, and the battery has sufficient charge. While on a call, the duration will be displayed and auto-reset every 4 hours. Entering numbers You need to have the area code and the phone number before you call. In idle screen 1. Enter the area code and phone number with # – , 2. The entered number is displayed 3. Press C (Send) Ending a call Whe
ページ12に含まれる内容の要旨
Recent calls Making a call from Recent calls list You can select phone numbers from Last call, Answered call or Unanswered call. There can be stored up to 50 recent numbers each in the Last call and the Answered call lists, and up to 20 in the Unanswered call list. In idle screen 1. Press C (Send) to show Recent calls lists 2. 4 move to the required list 3. Press < (Select) 4. 4 to the required number 5. Press C (Send) Managing the entries in Recent calls You can view, delete or delete all t
ページ13に含まれる内容の要旨
International calls You need to have the destination country/region code, area code and the phone number before you make an international call. In idle screen 1. Press and hold # until “+” is displayed 2. Enter the country/region code with # – , 3. Enter the area code and the phone number with # – , 4. Press C (Send) Note: When you make an international phone call, remember to omit the first “0” of the area code. (There are some exceptions.) Contacts list You need to store the phone numbers
ページ14に含まれる内容の要旨
E Service dial Your Service Provider may have programmed some special phone numbers into your SIM. You may not modify these numbers. In idle screen 1. Press 1 or 5 to display Contacts list 2. 4 move to the required Service dial number OR From idle screen 1. Press < (Menu) 2.0 move to Contacts 3. Press < (Select) 4. 4 move to Service dial 5. Press < (Select) Note: SDN (Service Dial Numbers) will be displayed only if SIM or All is selected in My Contacts (see “My Contacts” on page 49). If your
ページ15に含まれる内容の要旨
Rejecting While the phone is ringing, press D (Power/End) to reject the call. The number of the unanswered calls will be displayed. Press < (View) to see unanswered call information. Auto answer If Auto Answer is enabled, and the Personal Handsfree kit is connected, calls can be answered without pressing any keys. Any call waiting should be answered in the normal way (see “Auto answer” on page 30). Caller’s ID If you receive an incoming call whose number is stored in Contacts list, the call
ページ16に含まれる内容の要旨
Messages While on a call, you can send an SMS message as well as create or check an SMS or MMS message. While on a call 1. Press < (Menu) 2. 4 move to Messages 3. Press < (Select) (see “Messages” on page 67) Handsfree If Handsfree is activated, you can use the phone handsfree access to the phone without putting the earpiece to the ear. While on a call 1. Press < (Menu) 2. 4 move to Handsfree 3. Press < (Select) 4. 4 move to On or Off 5. Press < (Select) Hold Call A You can put a call on hold.
ページ17に含まれる内容の要旨
Connection 2 Connection 1 F Call waiting If Call waiting is on, you can receive another call or you can make a Multi-party call. Hold and answer You can place a current connection Call A on hold and answer a new call. While on a call 1. You hear an incoming call and Call B the Caller’s ID is displayed 2. Press C (Send) Hold Call A Call B End and answer You can end the current connection Call A and answer a new call. While on a call 1. You hear an incoming call and Call B the Caller’s ID is
ページ18に含まれる内容の要旨
Connection 2 Rejecting a new call Call A You can reject a new call while you are on a call. While on a call Call B 1. You hear an incoming call and the Caller’s ID is displayed 2. Press @ (Reject) Call A Reject Call B Second call Hold Call A You can make another call while on a call. While on a call Call B 1. Press @ (Hold) 2. Enter the required phone number with # – , OR Press A ( ) and select the required number 3. Press C (Send) The first call will be put on hold. 16 Basic Operati
ページ19に含まれる内容の要旨
Connection 2 Connection 2 Connection 2 Connection 2 Connection 2 Swapping call Hold Call A You can swap between 2 connections. While on the second call Call B 1. Press @ (Resume) 2. The second call will be placed on hold and you will be returned to the first call Call A 3. Press @ (Hold) 4. The first call will be placed on hold and you will be returned to Call B Hold the second call Hold Call A Call B Ending one connection Call A While on calls 1. Press < (Menu) 2.4 move to Hang up End Call
ページ20に含まれる内容の要旨
. . . Connection 2 Connection 2 Connection 2 F Multi-party call (Conference) You can have up to 5 calls on a Multi-party call. You cannot have more than one Multi-party call at a time. Making a Multi-party call Hold Call A While on 2 calls, with 1 call is on hold 1. Press < (Menu) Call B 2. 4 move to Conference call 3. Press < (Select) Call A Adding more callers Call B You can have up to 5 calls on a Multi-party call. Call C While on a Multi-party call 1. Press @ (Hold) Call A Hold The Confe
