ページ1に含まれる内容の要旨
@
Operating Instructions EB-GD35
Digital Cellular Telephone
Before operating this equipment please read these instructions
completely.
ページ2に含まれる内容の要旨
Quick Reference This Quick Reference guide is intended to enable you to utilize the mostbasicfeaturesofthephoneinstantlywithouthavingtosearch through specific details in this manual. Power On/Off International Dialling Press and hold E Press and hold 0, until + appears in the display, use Make a Call e to select the appropriate Use the keypad to enter the country, then press B area code and telephone Add a Phonebook Entry number you require, then press D Enter phone number and press A. Press B,
ページ3に含まれる内容の要旨
Contents Getting Started ..........................1 Fitting the SIM.........................1 Fitting the Battery.......................2 Charging the Battery......................3 Getting to Know Your Phone .................4 Basic Operation .........................7 Switching the Phone On/Off..................7 Making a Call .........................7 Automatic Redial .......................8 Ending a Call .........................8 Answering a Call........................8 Earpiece Volume
ページ4に含まれる内容の要旨
Short Text Messages ......................24 Setting the Phone for Text Messages............24 Sending a Text Message...................24 Receiving Text Messages..................25 Message Options.......................25 Using Pre-defined Messages ................26 Manage Messages Lists...................26 Message Parameters ....................27 Cell Broadcasts .......................28 Call Information.........................29 Recent Numbers.......................29 Call Identification
ページ5に含まれる内容の要旨
Getting Started Getting Started Thank you for purchasing this Panasonic digital cellular phone. This phone is designed to operate on the Global System for Mobile Communications (GSM), GSM900 or GSM1800. You must fully chargethebatterybeforeuse-see“ChargingtheBattery”on page 3. Before operating this phone please read the “Important Information” section - see page 50. These operating instructions detail the use of the equipment contained in the Main Kit. Someservicesdetailedhereinarenetworkdepende
ページ6に含まれる内容の要旨
Getting Started Fitting the Battery Removethebatterycoverby pressing where indicated and sliding the cover downwards (1). Note: DO NOT press hard in the centre of the battery cover as this may cause it to break. Ensurethatthebatterylocking mechanism is located to the right theninsertthetopofbatteryinto thebatteryrecess(2).Placethe baseofthebatteryintothe phone, slide down towards the SIM and push the sliding mechanismatthetop,totheleft,lockingthebatteryinplace(3). Ensure the sliding mech
ページ7に含まれる内容の要旨
Getting Started Charging the Battery Connecting the Travel Charger Thebatterymustbefittedtothe phone before the charger is connected. Ensuring the arrow on the plug is to the front of the handset, insert the charger plug into the base of the phone. Note: DO NOT force the plug as this may damage the phone and/or the charger. Connect the charger to the mains power supply. The LED on the phone lights to indicate that external power is applied. Operation of Battery Level Indicator While charging Cha
ページ8に含まれる内容の要旨
Panasonic Getting Started Low Battery Warning Youarenotifiedoflowbatterypowerbyablinking LOW LOW BATTERY message and a warning tone. If BATTERY this occurs during a call, end your call immediately. The power is automatically shut off Names Menu shortlyafterthewarningtone.Fullychargethe batterybeforeusingthephoneagain.(Callscanbemadeand received while the phone is charging). Itisrecommendedthatthebatteryisfullydischargedbetween chargestomaintainbatterylifeandperformance. Getting to Know Your Phon
ページ9に含まれる内容の要旨
Getting Started D makes a callorrecallsrecentlydialedphonenumbers C clears the last digit entered or clears all digits when pressed and held. Also returns to previous screen E ends a call or switches the phone on/off when pressed and held 1 Digit keys 0 to 9, * and #. The # keyswitches vibration alert on and off The Menu System The menu system provides the means for accessing all the functions which do not have dedicated buttons on the keypad. During a call a restricted menu will be available. S
ページ10に含まれる内容の要旨
Getting Started Status Icons The status icons are displayed according to the currently activated functions.TheAntenna,SignalandBatteryiconsarealways displayed when the handset is switched on and connected to a network. Y is displayed when you are registered to a non-home network - roaming t is displayed when call divert is enabled ] is displayed when vibration alert is enabled [ is displayed when all tones or ring volume is off N blinks when an unread message is stored or lights up when message
ページ11に含まれる内容の要旨
Basic Operation Basic Operation Switching the Phone On/Off To switch the phone on or off. GSM Press and hold E to switch power on Youmayseeagreetinganimationandthephone Names Menu will go into Idle mode. Press and hold E to switch power off If Keyguard is on, it must be disabled first - see “Using Key Guard” page 17. Making a Call Ensure the phone is switched on, the network operator logo is displayed and the signal strength meter shows network coverage is available in the current area. Enter ar
ページ12に含まれる内容の要旨
Basic Operation Emergency Calls Tomakeanemergencycall,theantennasymbol( S) must be present andbatterysufficientlycharged. Enter 112 D or press B when SOS is displayed in the main option area Automatic Redial When a call is unsuccessful, you may be Auto Redial prompted to redial the phone number again. 00:24 Press B when Ok is displayed in the main Cancel optionarea,thedisplaywillthencountdownin seconds to the next redial To stop redialing, press B when Cancel is displayed in the main option area
ページ13に含まれる内容の要旨
Basic Operation Caller Identification Home This feature allows you to identify incoming calls and accept or reject them. The caller’s phone +0123456789 number (and name if stored in the Phonebook) are Reject Accept displayed. Note: Caller Identification may not always be available. Earpiece Volume Control The volume level can be adjusted during a call: Press a to decrease the volume Press b to increase the volume VolumecontrolwhenusingthePersonalHandsfreeaccessoryis adjusted in the same way. Loc
ページ14に含まれる内容の要旨
Basic Operation Disabling Phone Lock 1 From Idle mode pressB8 to enter the Security menu. 2 Use f to select Disable in the main option area and press B 3 Enter the Lock Code and press B Setting Vibration Alert When vibration alert is enabled, the phone vibrates when a call is received. Enabling the vibration alert silences the ring volume. However, when the ring volume is adjusted after the vibration alert is switched on, the phone rings and vibrates when a call is received. From Idle mode: Pres
ページ15に含まれる内容の要旨
Phonebook Phonebook Phone numbers can be stored in the Phonebook for quick recall. The Phonebook is an area on the SIM allocated for storing phone numbers . Therefore the number of locations, length of name and number of phone numbers are SIM dependent. Store a Number To Store a Number in the Phonebook 0-9 1 From Idle mode enter the phone number and Location: press A (1-50) 2 Confirm phone number and press B Back Any 3 Enter the name – see “Text Entry” page 43, and press B 4 Enter location numbe
ページ16に含まれる内容の要旨
Phonebook Retrieve/Edit Phonebook Entries From Idle mode: 1 Press A 2 Use e to browse through the Phonebook Once you have selected a phone number or name, there are several actions you can perform. To dial the selected number press D You can also, View, Recall, Edit, Delete or Create entries in the Phonebook. With a phone number or name displayed: 3 Use f to cycle through View, Recall, Create, Edit or Delete in the option areas 4 Press B or A to select an option View Displays an individual name
ページ17に含まれる内容の要旨
Phonebook Using Alert Profiles Alert Profile enables you to identify callers with a particular ring tone, making it easier to distinguish between callers. Creating an Alert Profile 1 From Idle mode pressB23 to enter the Alert Profile menu 2 Press B to insert a new profile 3 Recall the phone number from the Phonebook – see “Retrieve/Edit Phonebook Entries” page 12 and press B 4 Use e to select the ring tone that you want to use for this profile and press B Hot Key Phone Numbers It is possible to
ページ18に含まれる内容の要旨
Phonebook My Numbers ThisfunctionisSIMdependent.MyNumbersisaconvenientpartof Phonebook where your phone number (s) can be stored and viewed. Adding Numbers 1 From Idle mode pressB25 to enter the My Numbers menu 2 Use f until Create is displayed in main option area and press B 3 Enter the phone number and press B 4 Enter the name - see “Text Entry” page 43, and press B 5 Enter location number and press B Viewing Stored Numbers From Idle mode pressB25 to enter the My Numbers menu If more than one
ページ19に含まれる内容の要旨
Personalising Your Phone Personalising Your Phone Add a Start-up Greeting A personalised greeting can be programmed for when the phone is switched on. 1 From Idle mode press B 531 to enter the Greeting menu 2 Usethetextentryfacilitytoaddyourgreetingandpress B - see “Text Entry” page 43. Displaying Animations Animations can be displayed when the phone is Animation switched on. Theme 1 1 From Idle mode press B 534 to Cancel Ok enter the Animation menu 2 Use e to view theme options and press B to s
ページ20に含まれる内容の要旨
Personalising Your Phone Disabling all Tones 1 From Idle mode press B 521 to enter the All Tones menu 2 Press B to disable all tones and the silent indicator icon ([)is displayed ([)isonlydisplayedwhenthevibrationalertisnotenabled Repeat the process to enable all tones. Changing the Language It is possible to change the language that the phone uses for display messages and/or text entry. 1 From Idle mode pressB51 to enter the Language menu 2 Use e to change either Display Language or Tegic Langu
