ページ1に含まれる内容の要旨
3-in-1 Food Processor
Instructions for Use
ページ2に含まれる内容の要旨
3-in-1 Food Processor TABLE OF CONTENTS Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Safety Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Descriptive Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Using Your Food Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Getting Start
ページ3に含まれる内容の要旨
IMPORTANT SAFEGUARDS When using electrical appliances, 13. To reduce the risk of injury, never basic safety precautions should always place cutter assembly blades on be followed to reduce the risk of fire, base without jar properly attached. electric shock, and/or injury to persons, 14. Always operate blender with cover including the following: in place. 1. Read all instructions carefully 15. When blending hot liquids, remove before using the appliance. measuring cup (center piece of 2. To prote
ページ4に含まれる内容の要旨
IMPORTANT SAFEGUARDS 27. Keep hands and utensils away from 30. Do not put your fingers or other the cutting blade while chopping objects into the juicer opening while food to reduce the risk of severe it is in operation. If food becomes injury to persons or damage to the lodged in opening, use food pusher food chopper. A scraper may be or another piece of fruit or used but only when the food vegetable to push it down. When chopper is not running. this method is not possible turn the motor off an
ページ5に含まれる内容の要旨
SAFETY RECOMMENDATIONS • Read the instructions for use carefully • Do not use the appliance if the power before using your appliance for the first cord or plug is damaged. The power cord time: T-fal does not accept responsibility must be replaced by an authorized T-fal for use that does not comply with the service center to avoid danger. instructions. • Do not use the appliance if the juicer unit • Do not leave the appliance running is damaged. unsupervised, especially when young • For your safe
ページ6に含まれる内容の要旨
INTRODUCTION Emeril’s 3-in-1 food processor will revolutionize the way you prep and cook. ® A major multi-tasker, your new Emerilware™ BAM Machine by T-fal will chop, slice, shred, mix, blend, juice, emulsify, make dough - and more! Use it to blaze your way to amazing meals. Stainless steel blades and discs can chop, mix and slice in seconds. Meanwhile, 2 speeds plus a pulse button will put you in charge of your daily prepping. The BAM Machine works hard so you won’t have to. It’s easy to c
ページ7に含まれる内容の要旨
The 3-in-1 Food Processor Description 1. Pusher with measuring marks 1. 2. Lid with feeder tube 3. Transparent bowl 4. Motor shaft 5. Speed selector: position 0-1-2-Pulse 8. 6. Motor unit 7. Storage drawer for 2. accessories 8. Spindle 9. 3. ACCESSORIES 10. (DEPENDING ON MODEL): 9. Metal blade 10. Plastic dough hook 11. 4. 11. Vegetable cutting disc 12. for fine grating/thin slicing (reversible) 5. 12. Vegetable cutting disc 13. for coarse grating/thick slicing (reversible) 13. Emulsifying d
ページ8に含まれる内容の要旨
USING YOUR FOOD PROCESSOR Getting Started • Before using for the first time, wash all accessory parts in hot, soapy water then dry thoroughly. Or place them in the dishwasher. • Set the motor unit on a clean, dry flat surface. • Plug in your appliance. • For Pulse (intermittent operation): turn the button (5) to the Pulse position and use in short bursts for better control of certain preparations. • For continuous operation: turn the button (5) to the 1 or 2 position. Fig. 1 • To stop: turn the
ページ9に含まれる内容の要旨
USING YOUR FOOD PROCESSOR Mix/Chop/Knead/Blend ACCESSORIES USED • Bowl unit (parts 1, 2 and 3). • Spindle (8). • Metal blade (9) for chopping and mixing. • Plastic dough hook (10) for kneading or mixing ASSEMBLING THE ACCESSORIES (Fig. 6) Fig. 6 1. Place the bowl (3) on the motor unit (6) without locking it. 2. Place the spindle (8) over the motor shaft. 3. Slide the metal blade (9) or plastic dough hook (10) onto the spindle. 4. Place the ingredients in the bowl. 5. Put on the lid (2) and lock
ページ10に含まれる内容の要旨
USING YOUR FOOD PROCESSOR Grate/Slice ACCESSORIES USED • Bowl unit (parts 1, 2 and 3). • Spindle (8). • Disc as desired (11 or 12) Fig. 7 ASSEMBLING THE ACCESSORIES (Fig. 7) 1. Place the bowl (3) on the motor unit (6) without locking it. 2. Lock the selected disc (11 or 12) onto the spindle (8). 3. Position the assembly on the motor shaft (4). 4. Put on the lid (2) and lock it on the bowl (3). 5 Turn the assembly to the right to the locked position. 6. To remove the bowl-lid assembly: turn the a
ページ11に含まれる内容の要旨
USING YOUR FOOD PROCESSOR Blend/Mix Very Finely ACCESSORIES USED • Blender Assembly (parts 15, 16 and 17). ASSEMBLING THE ACCESSORIES (Fig. 9) Fig. 9 1. Place the ingredients in the blender jug (17) without exceeding the maximum level indicated on the jug. 2. Put on the lid (16) with the measuring cap (15) and lock it on the jug (17). 3. Position the assembled jug (17) on the motor shaft (4), turn to the locking position. 4. After use, wait until the appliance has come to a stop, then unlock
ページ12に含まれる内容の要旨
USING YOUR FOOD PROCESSOR Juicing Citrus Fruit ACCESSORIES USED • Citrus Press Unit (parts 18, 19, 20 and 21). Fig. ASSEMBLING THE ACCESSORIES (Fig. 10) 1. Slide the citrus press spindle (21) onto the motor shaft (4). 2. Place the juice receptacle (20) on the motor unit (6). 3. Place the filter (19) around the receptacle. 4. Put the cone (18) on the receptacle (20), then turn the assembly to the locking position. 5. To remove the citrus press unit: turn the assembly to the left to release it. S
ページ13に含まれる内容の要旨
USING YOUR FOOD PROCESSOR Fig. Storing the Accessories Your food processor is equipped with: a storage drawer (7) which can hold the metal blade (9), the spindle (8), 2 cutting discs (11 and 12) as well as the emulsifying unit (13). Place them in the order and position shown in Figure 12. When the accessories are in place, close the storage drawer (7) into the motor unit (6) as shown in Figure 13. Fig. 13
ページ14に含まれる内容の要旨
CLEANING AND STORAGE Cleaning • Unplug the appliance. • For easier cleaning, rinse the accessories immediately after use. • Wash and wipe dry the accessories or place them in the dishwasher. • Pour hot water containing a few drops of dishwashing washing liquid into the blender (17). Close the lid (16) with its measuring cap (15) on. Give a few pulses. Unplug the appliance. Rinse the jug. • Never immerse the motor unit (6) in water, or run water over it. Wipe it clean with a damp sponge. • The b
ページ15に含まれる内容の要旨
ONE YEAR LIMITED WARRANTY The manufacturer warrants this product to be defect free in material and workmanship for a period of one year from the date of purchase. Defective products may be returned by the original purchaser or any subsequent owner within the warranty period, postage pre-paid together with proof of purchase (register receipt) to an authorized T-fal return facility. If product is returned without proof of purchase it will be reviewed based on the manufacturing production week and
ページ16に含まれる内容の要旨
ONE YEAR LIMITED WARRANTY What happens to my return? If the inspection shows that the product is defective, under our Limited Warranty, the return facility will notify T-fal to replace the defective part or product at no cost to you. Comparable substitutions are based on replacement product availability and at the sole discretion of the Manufacturer. If the inspection shows that the product is not defective under our Limited Warranty we will notify you. Shipping charges may apply to product not
