ページ1に含まれる内容の要旨
12 volt “oooga” horn
96291
Model
asseMbly and operation instructions
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
visit our website at: http://www.harborfreight.com
t o prevent serious injury, read and understand
all warnings and instructions before use.
© ®
Copyright 2007 by Harbor Freight Tools . All rights reserved. No portion of this
manual or any artwork contained herein may be reprod
ページ2に含まれる内容の要旨
specifications Operating Power 12 Volts DC Horn Dimensions 8-3/4” Overall Length Bell Opening 3” Dia. x 4-5/8” L Materials PVC Horns & metal enclosed motor Volume 110 dB Weight 1.4 Pounds save this Manual You will need this manual for the safety warnings and precautions, assembly, oper- ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Write the product’s ser
ページ3に含まれる内容の要旨
6. store idle equipment out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users. 7. c heck for breakage of parts and any other condition that may affect the o ooga horn’s operation. If damaged, have the tool serviced before using. 8. service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. 9. Maintain labels and nameplates on the oooga horn. T
ページ4に含まれる内容の要旨
hole may need to be drilled in the chassis frame to accomplish this. Before drilling the hole, make sure the drill’s path will not come in contact with hidden wiring or any other obstructions or vehicle components. Tighten the Nut securely. 4. Mount the Electric Relay (not included), as shown in the Wiring Diagrams, to the chassis frame near the Oooga Horn using a Bolt and Nut (not included). Tighten securely. 5. Make the connections to the Oooga Horn (1) and the Electric Relay (not inclu
ページ5に含まれる内容の要旨
positive ground wiring diagram +12 vdc electric relay 87 pushbutton horn switch 88 85 not included 51 30 30 a -12 vdc connection is to the line positive existing vehicle fused circuit “+” point of the original horn SKU 96291 for technical questions, please call 1-800-444-3353. Page 5
ページ6に含まれる内容の要旨
inspection, Maintenance, and cleaning 1. warning! Make sure the ignition of the vehicle is in the “OFF” position and that the tool is disconnected from the electrical outlet before performing any inspec- tion, maintenance, or cleaning procedures. 2. BEFORE EACH USE, inspect the general condition of the tool. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation. If abno
