ページ1に含まれる内容の要旨
Stay in touch for FREE with Oricom
Stay in touch for FREE with Oricom
Highly sophisticated: You can communicate when you are out and about enjoying sport
and leisure activities, whilst at work or out on a job site.
Long range: With a massive 1 watt of power you can expect up to 7km range
depending on terrain and environmental conditions. The range is longer when using the
duplex feature.
Free communication: No call costs.
No license required: Start using your Oricom PMR1000R radios straight aw
ページ2に含まれる内容の要旨
Contact us Contact us Important information Important information Customer support Australia Important safety information Email: support@oricom.com.au Oricom International Pty Ltd •Do not use the radios in areas where there is a risk of explosion, such as fuel stores, Web: www.oricom.com.au PO Box 5681 blasting areas, chemical stores or areas in which chemicals or other solids are Fax: (02) 4572 0939 South Windsor NSW 2756 present in the air. Always follow all information signs. Areas at risk
ページ3に含まれる内容の要旨
Warranty information Safety and general information Warranty information Safety and general information This product is covered by a 12-month warranty against defective workmanship or Exposure to Radio Frequency (RF) energy parts. The warranty does not extend to damage caused by misuse, negligence, water Exposure to Radio Frequency (RF) energy ingress, battery leakage or lightning. This guarantee in no way affects your statutory rights. Full details of the warranty are contained in the enclosed
ページ4に含まれる内容の要旨
Attaching the belt clips Attaching the belt clips Your Oricom PMR1000R radio controls Your Oricom PMR1000R radio controls Attaching the belt clips (2 included) Headset Each radio is supplied with a belt clip. socket Menu button Indicator light To attach, simply slide into place. Display On/off button illumination Volume and menu settings Volume and Removing the belt clip menu settings To remove, release the clip with a Channel search screwdriver and slide upwards as shown. and monitor Clip C
ページ5に含まれる内容の要旨
Changing the faceplates Changing the faceplates Your Oricom PMR1000R radio display Your Oricom PMR1000R radio display Additional coloured faceplates Your radios are supplied with additional coloured faceplates, which you can change Keypad lock as required. Scan Removing the faceplate Rodger beep Battery level 1. Carefully lever the faceplate out of the fixing at Position 1 positon 1 using a screwdriver. 2. You can then release the whole faceplate from the radio quite easily. CTCSS code Fixi
ページ6に含まれる内容の要旨
This pack contains This pack contains Channel Frequency (MHz) Usage Channel Frequency (MHz) Usage 1 476.425 Simplex/Duplex 21 476.925 Simplex • 2 UHF radios 2 476.450 Simplex/Duplex 22 476.950 No Use • 2 belt clips 3 476.475 Simplex/Duplex 23 476.975 No Use • 2 headsets 4 476.500 Simplex/Duplex 24 477.000 Simplex • 2 Ni-Mh rechargeable battery packs 5 476.525 Emergency
ページ7に含まれる内容の要旨
1. Ensure radio is turned off. Remove the belt clip on the back. Automatic energy saving mode The radios are designed with a power saving mode. If no transmissions take place within a certain time, the unit switches itself off automatically. The time can be set to 30, 60 or 90 minutes. In setting 0, energy saving mode is switched off. 1. Press the button five times. The indicator will appear in the display and the 2. Locate the clip on the battery cover. Use your fingernail to g
ページ8に含まれる内容の要旨
Using the twin charging kit 2. Select sensitivity level 1, 2 or 3 by using or . Choose - Using the twin charging kit 1- If you speak loudly, or are in a noisy environment. 2- Suitable for most applications. 3- If you speak softly, or are in a quiet environment. Note: When you connect a VOX headset, the radio will automatically be set to the last chosen VOX sensitivity level. If IVOX is active, the radio will automatically select IVOX level. Monitor function Monitor function To use t
ページ9に含まれる内容の要旨
Turning your radio on and off How to use the IVOX feature Press and hold for two seconds to turn your radio on. The radio chirps and the This feature allows you to transmit “hands-free” by talking into the radio microphone display will show all feature icons for a brief period. Press and hold button for 2 without using the headset. seconds to turn off your radio. 1. Turn off your radio. 2.Turn on your radio whilst holding ; the icon will appear in the Adjusting the volume level display t
ページ10に含まれる内容の要旨
Talking and listening 1. Select the repeater channel in your area (channel 1 to channel 8). It is good radio etiquette to monitor the channel for activity before you transmit, to 2.Press the menu button 4 times to enter duplex mode, press or to switch ensure that you do not interrupt other users already on the channel. between duplex and simplex mode. Press and hold the button to check for channel activity. If you hear static, the For example, channel is clear for use. Your radio has 40 cha
ページ11に含まれる内容の要旨
1. Press until the code number begins to flash. Channel busy indicator 2. Use or to select required CTCSS tone 0 (off) or 1-38. The red LED will flash twice per second to indicate that the channel is in use. 3. Press to set the new code. Time-out timer Channel scan The time-out timer feature helps extend battery life by preventing accidental transmission. By scanning, you can monitor channels and codes for transmissions and lock in on the The radio will emit a continu
ページ12に含まれる内容の要旨
You can specify a different code for each channel. Monitor 1. To set a channel and CTCSS code combination, press and then press or Pressing and holding allows you to monitor your channel for activity. to select the channel. 2. Press again and then press or to select a CTCSS code. Keypad lock 3. You can not select interference eliminator codes on channel 5 or channel 35. On this The keypad lock disables the , and buttons. It also disables the scan
