ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
IMPORTANT NOTICES General • The operator of this equipment must read and follow the descriptions in this manual. Wrong operation or maintenance can cancel the warranty or cause injury. • Do not copy any part of this manual without written permission from FURUNO. • If this manual is lost or worn, contact your dealer about replacement. • The contents of this manual and equipment specifications can change without notice. • The example screens (or illustrations) shown in this manual can be di
ページ3に含まれる内容の要旨
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS WARNING WARNING Radio Frequency ELECTRICAL SHOCK HAZARD Do not open the equipment. Radiation Hazard Only qualified personnel The radar antenna emits electromagnetic should work inside the radio frequency (RF) energy which can be equipment. harmful, particularly to your eyes. Never look directly into the antenna aperture from Turn off the radar power a close distance while the radar is in switch before servicing the operation or expose yourself to the tra
ページ4に含まれる内容の要旨
TABLE OF CONTENTS FOREWORD................................................................................................................. viii SYSTEM CONFIGURATIONS......................................................................................... x 1 OPERATIONAL OVERVIEW ................................................................................. 1-1 1.1 Operating Controls ........................................................................................................
ページ5に含まれる内容の要旨
TABLE OF CONTENTS 2.15 Zoom .................................................................................................................................2-12 2.15.1 Zooming radar targets...........................................................................................2-12 2.15.2 Zooming ARP, TTM targets ...................................................................................2-13 2.16 Shifting the Picture ................................................................
ページ6に含まれる内容の要旨
TABLE OF CONTENTS 3.5.4 C-MAP charts ....................................................................................................... 3-14 3.6 Working with Track ........................................................................................................... 3-18 3.6.1 Displaying track.................................................................................................... 3-18 3.6.2 Stopping, restarting plotting of own ship track.................................
ページ7に含まれる内容の要旨
TABLE OF CONTENTS 4.3.4 Shifting the range....................................................................................................4-8 4.4 Measuring Depth, Time .......................................................................................................4-9 4.5 Reducing Interference.........................................................................................................4-9 4.6 Reducing Low Level Noise.......................................................
ページ8に含まれる内容の要旨
TABLE OF CONTENTS 7.4 Chart Setup ...................................................................................................................... 7-13 7.4.1 Chart offset........................................................................................................... 7-13 7.4.2 Navionics GOLD chart attributes ......................................................................... 7-14 7.4.3 C-MAP chart attributes..............................................................
ページ9に含まれる内容の要旨
FOREWORD A Word to the Owner of the Model 18x4C-BB/19x4C-BB Series Marine Radar, GD-1920C-BB Color Video Plotter FURUNO Electric Company thanks you for purchasing the Model 18x4C-BB/19x4C-BB Series Marine Radar, GD-1920C-BB Color Video Plotter. We are confident you will discover why the FURUNO name has become synonymous with quality and reliability. For over 60 years FURUNO Electric Company has enjoyed an enviable reputation for quality and reliability throughout the world. This dedi
ページ10に含まれる内容の要旨
FOREWORD • User friendly operation with combination of discrete keys, soft keys, alphanumeric keys and Trackball. + • Accepts the following SD chart cards: Navionics GOLD charts or C-MAP NT /NT MAX charts depending on specification. All names mentioned above are registered trademarks of their respective companies. • Fast chart redraw. • Built-in NavNet interface circuit board. • Video input (video recorder, CCD device, etc.) available with installation of optional PIP Board. • Highly a
ページ11に含まれる内容の要旨
SYSTEM CONFIGURATIONS All NavNet products incorporate a “network circuit board” to integrate each NavNet product on board through an optional LAN cable (Ethernet 10BASE-T). Each NavNet product is assigned an IP address to enable transfer of images between other NavNet products. For example, video plotter pictures can be transferred to a radar and vice versa. Pictures received via the NavNet may be adjusted at the receiving end. The number of processor units which may be installed depen
ページ12に含まれる内容の要旨
SYSTEM CONFIGURATIONS Single-unit NavNet system (GD-1920C-BB) GPS Receiver GP-320B/330B or Weather Station WS-200 External buzzer * Not required for AIS Transponder FA-150 AIS Interface AIS transponder VGA monitor IF-1500AIS* Remote display PC Remote Video equipment Controller RMC-100 ARPA Display unit ARP-11 RDP-149 HUB Echo sounder Navigator Other NavNet Unit FA-30 (Model 1834C, etc.) AIS RECEIVER Rectifier Network Facsimile PR-62 Sounder Receiver ETR-6/10N 12 - 24 VDC FAX-30 ETR-30N 100
ページ13に含まれる内容の要旨
SYSTEM CONFIGURATIONS Two-unit NavNet system Radar Antenna Unit, Radar Antenna Unit, GPS Receiver GPS Receiver GP-320B/330B, GP-320B/330B, OR OR Weather Station WS-200 Weather Station WS-200 RADAR RADAR or or PLOTTER PLOTTER Radar, plotter data Radar, plotter data Two-unit NavNet system Three-or-more-unit NavNet system (Max. 4 units) Radar Antenna Unit, Radar Antenna Unit, GPS Receiver GPS Receiver GP-320B/330B, GP-320B/330B, OR OR Weather Station WS-200 Weather Station WS-200 RADAR RADAR
ページ14に含まれる内容の要旨
1. OPERATIONAL OVERVIEW This chapter provides the basic information needed to get you started using your radar, video plotter. 1.1 Operating Controls 1.1.1 Control unit The radar, video plotter, sounder and chart systems are operated with the control unit. Ten keys are labeled and they provide the function shown on their labels. The five soft keys provide various functions according to current operating mode. The ENTER knob mainly functions to register selections on the menu and a
ページ15に含まれる内容の要旨
1. OPERATIONAL OVERVIEW Soft keys The function of the five soft keys (labeled A, B, C, D and E) changes according to the operation. Their labels for their current functions are shown on the screen to the left of the keys. To hide or show the soft keys, press the HIDE/SHOW key. Each press of the key shows preset soft keys, user function keys or turns off navigation information (at the top of the screen). Some soft keys show the current setting of a soft key in reverse video as shown bel
ページ16に含まれる内容の要旨
1. OPERATIONAL OVERVIEW 1.2 Inserting a Chart Card + Your unit reads SD cards, in the following formats: Navionics GOLD charts or C-MAP NT / NT MAX charts, depending on the type of processor unit you have. Insert the appropriate chart card for your area as follows: 1. Open the chart drive. Chart drive Processor unit 2. Insert desired chart label side up, before turning on the power. 3. Close the lid. To remove chart card, follow the steps shown below. 1. Press the MENU ke
ページ17に含まれる内容の要旨
1. OPERATIONAL OVERVIEW 1.3 Turning the Unit On/Off Press the POWER/TX key to turn the unit on. A beep sounds and then the equipment shows the startup NavNet screen (about 20 seconds), the product information screen, startup test results and chart usage disclaimer. During this period the equipment is inoperative. The startup test checks the ROM, RAM, internal battery and backup data for proper operation, displaying the results for each as OK or NG (No Good). If NG appears an appropriate m
ページ18に含まれる内容の要旨
1. OPERATIONAL OVERVIEW 1.4 Adjusting Hue, Panel Illumination You may choose the colors for the radar plotter, and overlay displays, and adjust panel brilliance. 1. Press the POWER/TX key momentarily. A set of soft keys for adjustment of brilliance and hue appear. 3nm 34° 22. 3456'N 359.9°M TRIP NU BRILL BRILL 12/LP °M 080° 22. 3456'E 19.9 kt 99.9 nm CONTST CONTST 319. 9 H-UP 16.0nm PANEL PANEL B B BRILL BRILL C HUE C HU
ページ19に含まれる内容の要旨
1. OPERATIONAL OVERVIEW 4. Press the B: PANEL BRILL soft key to show the panel brilliance window. The bar graph shows current panel brilliance setting. PANEL BRILLIANCE 8 Panel brilliance setting window 5. Adjust the ENTER knob, clockwise to raise the brilliance or counterclockwise to lower it. 6. Hit the E: RETURN soft key to finish. 1.5 Selecting a Display 1.5.1 Display modes If you have a radar, navigator, network sounder and external video source (video recorder, etc., optiona
ページ20に含まれる内容の要旨
1. OPERATIONAL OVERVIEW 1.5.2 Selecting a display 1. Press the DISP key to show the display screen selection window. The icons of modes not available are shaded. HOTPAGE 1-HOTPAGE 6 are user-arrangeable displays called “hot pages,” which you can configure as you like. For further details, see the paragraph “7.6 Hot Page Setup.” Selected Basic display item RADAR PLOTTER SOUNDER NAV DATA OVERLAY EXT VIDEO WX FAX screens Hot pages HOTPAGE 1 HOTPAGE 2 HOTPAGE 3
