ページ1に含まれる内容の要旨
C150-E141-02EN
M4099D Image Scanner
Operator's Guide
ページ2に含まれる内容の要旨
M4099D Image Scanner Operator's Guide
ページ3に含まれる内容の要旨
Edition Date published Revised contents 01 December, 1999 First edition 02 February, 2000 • Typos corrected • Illusts corrected about pad and regulation label • Descriptions deleted about sleep (power saving) mode, endorser, and error count and history • Descriptions corrected about buzzer, some setup options, how to quit setup mode, and replacement cycle of consumables • FCC statement added Specification No. C150-E141-02EN This equipment has been tested and found to comply with the lim
ページ4に含まれる内容の要旨
Please send your comments on this manual or on Fujitsu products to the following addresses: North American contact: Asian contact: FUJITSU COMPUTER PRODUCTS OF FUJITSU HONG KONG LTD. AMERICA, INC. 10/F, Lincoln House, Taikoo Place, 2904 Orchard Parkway, San Jose. 979 King’s Road, Island East, Hong Kong California 95134-2009, U.S.A. Phone: (852) 2827-5780 Fax: (852) 2827-4724 Phone: (1-408) 432-6333 Fax: (1-408) 894-1709 HOME PAGE: http://www.fujitsu.com.hk/ HOME PAGE: http://www.fcpa.com/ FUJI
ページ5に含まれる内容の要旨
IMPORTANT NOTE TO USERS READ CAREFULLY ALL OF THIS MANUAL BEFORE USING THIS PRODUCT. IF NOT USED CORRECTLY, UNEXPECTED DAMAGES MAY BE CAUSED TO THE USERS OR THE BYSTANDERS. While all efforts have been made to ensure the accuracy of all information in this manual, FUJITSU assumes no liability to any party for any damage caused by errors or omissions or by statements of any kind in this manual, its updates or supplements, whether such errors are omissions or statements resulting from negligence, a
ページ6に含まれる内容の要旨
Preface This manual explains how to use the M4099D image scanner. This scanner can be equipped with an optional endorser; however, Illustrations in this manual do not include the endorser except those in Chapter 5. For details of the endorser, refer to its Operator Guide. This manual contains COMPONENTS, INSTALLATION AND CONNEC- TIONS, OPERATING INSTRUCTION, DOCUMENT SPECIFICATION, SPECIFICATIONS, and SETUP, BROWSE, AND TEST MODES. Refer to the CD-ROM for the information about the routine oper
ページ7に含まれる内容の要旨
Conventions Special information, such as warnings, cautions, and notes are indicated as follows: WARNING WARNING indicates that serious personal injury may result if you do not follow a procedure correctly. CAUTION CAUTION indicates that minor personal injury, loss of data, or damage to the scanner may result if you do not follow a procedure correctly. NOTE NOTE indicates remarks, tips, and other useful supplementary information. The following symbols are used in this manual. Used for general WA
ページ8に含まれる内容の要旨
CONTENTS q CHAPTER 1 COMPONENTS Checking the Components ......................................................... 1-1 Units and Assemblies ................................................................ 1-2 Operator Panel ..........................................................................1-5 Buzzer .......................................................................................1-8 q CHAPTER 2 INSTALLATION AND CONNECTIONS Precautions ................................................
ページ9に含まれる内容の要旨
COMPONENTS CHAPTER 1 COMPONENTS INSTALLATION AND CONNECTIONS CHAPTER INSTALLATION AND CONNECTIONS 2 OPERATING INSTRUCTION CHAPTER OPERATING INSTRUCTION 3 DOCUMENT SPECIFICATION CHAPTER 4 DOCUMENT SPECIFICATION SPECIFICATIONS CHAPTER 5 SPECIFICATIONS SETUP, BROWSE, CHAPTER AND TEST MODES 6 SETUP, BROWSE, AND TEST MODES GLOSSARY OF TERMS GLOSSARY OF TERMS INDEX INDEX vii
ページ10に含まれる内容の要旨
CHAPTER 1 COMPONENTS After unpacking the scanner, confirm that all the components have been received. This chapter describes the components of the scanner, part names, and operator panel arrangement and their function. Checking the Components Units and Assemblies Operator Panel Buzzer
ページ11に含まれる内容の要旨
Checking the Components These high precision components must be handled with care. Confirm that all the components shown in the following figure have been received. Mount the stop lever on the stacker of the scanner. If any component is missing, please contact your sales agent. * Stop lever Scanner Power cable Power cable for North America for Europe * or Operator’s Guide (this manual) and two CD-ROMs 1-1
ページ12に含まれる内容の要旨
Units and Assemblies This section shows the exterior view and assemblies of the scanner. This section also provides names of each part and describes their functions. Units 16 17 18 17 19 15 12 6 13 7 14 4 7 8 1 9 2 10 11 5 3 4 20 21 23 22 1-2
ページ13に含まれる内容の要旨
No. Name Function 1 Operator panel Used to operate the scanner. 2 Power switch Used to power on or off. 3 Hopper Document input tray. 4 Hopper guides Used to adjust the document width. 5 Hopper extension For use with long documents. 6 Automatic document feeder (ADF) Feeds documents automatically. 7 ADF release lever Used to open the ADF. 8 Pick roller unit Picks top page in document stack. 9 Guide plate The pad is mounted on. 10 Pad Separates top page from document stack. 11 Brake roller Separat
ページ14に含まれる内容の要旨
Assemblies Lower sheet guide assembly Pick roller unit Brake roller Lamp unit (back side) Pad Lamp Lamp unit (front side) Lamp Guide plate 1-4
ページ15に含まれる内容の要旨
Operator Panel The operator panel is located at the lower right hand side of the scanner. The panel consists of an LCD (24 character x 2 line), LEDs, and buttons. Arrangement Operator panel LCD 24 characters x 2 lines POWER DATA CHECK F1 MENU F2 ENTER F3 CANCEL 1-5
ページ16に含まれる内容の要旨
Button/LED Function Button name Function Turns on or off the power when the main line switch is set to “I”. Sets the scanner in setup or browse mode. It is also used to set test mode. (See Chapter 6) MENU Setup mode is used for customizing the scanner. Browse mode is used for glancing conditions of the scanner. Test mode is used for testing the scanner offline. ENTER Used in setup, browse, or test mode. • Clears an error if any. CANCEL • Stops current scanning when the video interface is us
ページ17に含まれる内容の要旨
Operation status display After power is turned on, the LCD indicates the following messages in normal mode. Please wait Wait for a moment. This is indicated when processing takes a long time. When this is displayed after turning power on, the second line indicates initializing messages. Ready The scanner can receive a command from the host computer or can be set in setup, browse, or test mode. Manual Feeding Load documents on the hopper table manually. Feeding The scanner is feeding documents.
ページ18に含まれる内容の要旨
Buzzer The scanner has a buzzer to indicate that an error has occurred or an operator panel button is pressed. The buzzer function can be set on or off by following the procedure “Buzzer” in Chapter 6 SETUP, BROWSE, AND TEST MODES. Sound condition Function Error occurred Sounds continuously. The buzzer turns off when any button is pressed or the power is turned off. Even when a button is pressed, the scanner continues to display the error. Button pressed Sounds briefly. This sound cannot be d
ページ19に含まれる内容の要旨
CHAPTER 2 INSTALLATION AND CONNECTIONS The chapter describes how to install and connect the scanner. Precautions Inspection Cable Connection
ページ20に含まれる内容の要旨
WARNING Place the machine with no portion of the scanner hangs over the desktop. Never attempt to move or relocate the machine without help. And hold the horizontal plane of the scanner bottom. (Not inclined plane) ACHTUNG Stellen Sie den Scanner sicher auf eine waagerechte, ebene Flache. Precautions Bewegen Sie den Scanner nicht ohne Hilfe. This section describes precautions when installing the scanner. Do not install the scanner in the following places and environments. • Place the scanner
