ページ1に含まれる内容の要旨
P3PC-3362-02EN
Image Scanner Image Scanner
Getting Started Getting Started
Thank you for purchasing the fi-6130Z/fi-6230Z/fi-6140Z/fi-6240Z color image scanner.
This manual describes the preparation required to use this product. Follow the procedures in this manual.
Make sure to read the attached "Safety Precautions" manual before using the scanner.
For details about scanner functions and features, basic operation, daily care, consumable replacement and
troubleshooting, refer to the Operator's
ページ2に含まれる内容の要旨
Safety Information Installing the Software The attached Safety Precautions manual contains Bundled Software important information about the safe and correct use of this product. Make sure that you read and The following software are bundled with the understand it before using the scanner. scanner: TWAIN Driver Conforms to the TWAIN standard. Used when Symbols Used in This you operate the scanner using TWAIN- Manual compliant applications. ISIS Driver The following symbols are used in thi
ページ3に含まれる内容の要旨
Scan to Microsoft SharePoint System Requirements An application that allows you to upload your The system requirements are as follows. files easily from ScandAll PRO or ScanSnap ® mode to a SharePoint site. Can be installed Windows XP Home Edition together with ScandAll PRO when you select (Service Pack 3 or later)(*1) ® [INSTALL (Custom)]. Windows XP Professional (Service Pack 3 or later) ABBYY FineReader for ScanSnap™ ® Windows XP Professional x64 Edition Bundled for use with ScanSnap
ページ4に含まれる内容の要旨
*1: Kofax VRS is not supported. 1. Turn on the computer and log onto ® *2: QuickScan Pro is not supported with 64-bit Windows . operating systems. 2. Insert the Setup DVD-ROM into the DVD *3: ScandAll PRO, ScanSnap mode, Scan to drive. Microsoft SharePoint, and ABBYY FineReader The [FUJITSU Image Scanner Setup] for ScanSnap™ are not supported. screen appears. *4: Scanner Central Admin Agent is not supported. If the [FUJITSU Image Scanner Setup] *5: Required disk space varies according t
ページ5に含まれる内容の要旨
3. Attach the ADF paper chute. Installing the Scanner Insert the tabs into the slots on the back of the scanner, and tilt the ADF paper chute Install the scanner in the following procedure. backwards until it locks in place. 1. Place the scanner at its installation site. Tab ADF paper chute Carry the scanner by supporting it from the bottom. Side guide fi-6130Z/fi-6140Z 2 Outer dimensions Installation space 1 380 (14.96) Connecting the Cables 158 Connect each cable in the following procedur
ページ6に含まれる内容の要旨
Conditions and precautions for using the 4. Connect the power cable to the power cables are as follows: connector of the scanner and the power USB cable outlet. -Use the supplied USB cable. When you plug the cable into the -When connecting to a USB hub, make sure outlet, the [Power] button on the to use the USB hub that is connected to the scanner’s operator panel will flash USB port of the computer. once. Note that this is an initial -If you connect the scanner with USB 2.0, it diagnos
ページ7に含まれる内容の要旨
3. Load a document in the scanner. 8. Select a scanner, and then click the [Select] button. 1. Pull out the chute extensions according to the length of the document. Make sure to select the scanner model that is connected to the computer. The displayed 2. Lift up the stacker and stacker extensions model name varies depending on the driver. according to the length of the document. 3. Load the document face-down in the ADF TWAIN ISIS Model Kofax VRS paper chute. Driver Driver 4. Adjust the
ページ8に含まれる内容の要旨
13. In the [Scan Settings] dialog box, click the Contact for Inquiries [Scan] button. The document is scanned, then the Refer to the contact list on the last page of the scanned image is displayed in ScandAll Safety Precautions manual. PRO. We are not able to answer inquiries on ABBYY FineReader for ScanSnap™. For inquiries regarding ABBYY FineReader for ScanSnap™, refer to [ABBYY Offices] in the “Technical Support” section of the ABBYY FineReader for ScanSnap™ User’s Guide (*1). *1: Se
