ページ1に含まれる内容の要旨
Power Tools
Item# 3343109
3" VARIABLE SPEED BENCH GRINDER
USER'S MANUAL
Read carefully and understand RULES FOR SAFE OPERATION and instructions
before operating. Failure to follow the safety rules and other basic safety
precautions may result in serious personal injury.
Assembly and Operation Instructions
Made in China
ページ2に含まれる内容の要旨
For technical questions and replacement parts, please call 1-800-222-5381. Thank you very much for choosing a NORTHERN TOOL + EQUIPMENT CO., Product! For future reference, please complete the owner's record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions.It is important you read the entire manual to become familiar with this product before you begin using it. This product is designed for certain applications only. Northern
ページ3に含まれる内容の要旨
12. Check for damaged parts. Before using this tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform as intended. Check for alignment and binding of moving parts, broken parts or mounting fixtures and any other conditions that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the tool if any switch does not turn on and off properly. 13. Replacem
ページ4に含まれる内容の要旨
USING THE GRINDER ! WARNING The grinding wheel can fly apart and cause injury. Grinding wheels must always be checked for cracked for cracks or imperfections. This is done with the "ring test". Tap the wheel gently near the outer rim with the handle of a screwdriver. You should hear a clear bell-like ring. If a dull thud occurs, do not use the wheel. The wheel may be damaged and could come apart during operation. CAUTION: Always wear ANSI-approved safety glasses when grinding. 1.
ページ5に含まれる内容の要旨
Part No. Description Quantity Part No. Description Quantity 21 Fan Shroud 1 50 Base 1 22 Rotor 1 51 Circuit Board 1 23 Rubber Gasket 2 52 Pan Head Screw M4x10 5 Workpiece Holder 24 2 53 Plastic Cover 1 25 Pan Head Screw M5x8 11 54 Rubber Feet 4 26 Spring Washer M5 16 55 Pan Head Screw M5x18 4 27 Flat Washer 16 56 Sleeve Plate 1 Bearing 28 1 57 Circuit Sleeve 1 29 Grinding Wheel Cover 1 58 Cord 1 4 of 5
ページ6に含まれる内容の要旨
5 of 5
