ページ1に含まれる内容の要旨
1/4” COMPOSITE AIR DIE GRINDER
95029
ASSEMBLY AND OPERATING
INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
TO PREVENT SERIOUS INjURY ,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
© ®
Copyright 2006 by Harbor Freight Tools . All rights reserved. No portion of this manual or any
artwork contained herein may be r
ページ2に含まれる内容の要旨
Specifications Collet Capacity 1/4” Diameter Maximum Air Pressure 90 PSI Air Consumption 5 SCFM average Air Inlet Diameter 1/4” - 18 NPT (female inlet) Maximum RPM 22,000 RPM Activation Method Paddle Style Activator with Spring- Loaded Safety Lever Overall Dimensions 1-15/16” D X 6-3/4” L X 2-13/16” H Weight 1.55 lbs. Save This Manual You will need the manual for the safety warnings and precautions, assembly instruc- tions, operating and maintenance procedures, parts list and diagram. Keep you
ページ3に含まれる内容の要旨
7. Stay alert. Watch what you are doing and use common sense when operating a pneumatic tool. Do not use a pneumatic tool while tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating pneumatic tools may result in serious personal injury. 8. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving p
ページ4に含まれる内容の要旨
20. Industrial applications must follow OSHA requirements. Warning: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contain chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement or other masonry products, arsenic and chromium from chemically treated lumber. Your risk from these exposur
ページ5に含まれる内容の要旨
Assembly and Operation Instructions (continued) Note: The Composite Air Die Grinder is designed to be used with grinding attachments, backing pads and sanding discs and other small attachments such as the grind- ing drum shown in Figure B below. To Operate the Die Grinder: 1. WARNING: Prior to performing any assembly and/or adjustment procedures, make sure the air supply hose (not included) is disconnected from the Die Grinder. 2. WARNING: Always wear ANSI-approved safety goggles, a full fac
ページ6に含まれる内容の要旨
Assembly and Operation Instructions (continued) 9. With a firm grip on the Die Grinder, lightly apply the Grinding Drum to the workpiece, slowly and steadily moving the Grinding Drum to the right and left until you have achieved the desired appearance (finish) on the workpiece. 10. Once the work is completed, release the hand pressure on the Lever (14). The Lever Pin (15) will automatically return to its locked position to prevent the Lever from ac- cidentally being activated. 11. Turn off t
ページ7に含まれる内容の要旨
Parts List and Diagram Part Description Q’ty Part Description Q’ty 1 Plug Screw 1 16 Bearing 1 2 O-Ring 1 17 Bearing Plate 1 3 O-Ring 1 18 Ball 2 4 Air Regulator 1 19 Rotor Blade 4 5 Valve Spring 1 20 Rotor 1 6 O-Ring 1 21 Cylinder 1 7 Valve Stem 1 22 Bearing Plate 1 8 O-Ring 1 23 Bearing 1 9 Motor Housing 1 24 Washer 1 10 Valve Bushing 1 25 Spindle 1 11 O-Ring 2 26 Lock Ring 1 12 Muffler 1 27 Housing Cap 1 13 Air Inlet 1 28 Collet 1 14 Trigger Lever 1 29 Collet Nut 1 15 Lever Pin 1 30 Wrench 2
ページ8に含まれる内容の要旨
Warranty Limited 1 Year Y arrantw Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 1 year from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, or to lack of maintenance. We