ページ1に含まれる内容の要旨
G 2600 PH
English 2
Español 16
Français 33
9.139-200.0 10/06
ページ2に含まれる内容の要旨
HIGH PRESSURE WASHER OPERATOR MANUAL Model Overview 3 Owner/User Responsibility Important Safety Instructions 4 The owner and/or user must have an Assembly Instructions 6 understanding of the manufacturer’s Operating Instructions 7 operating instructions and warnings be- fore using this pressure washer. Using the Accessories 8 Warning information should be empha- Working with Detergents 9 sized and understood. Taking a Break 10 If the operator is not fluent in English, Shutting Down & Clean-U
ページ3に含まれる内容の要旨
MODEL OVERVIEW 1 Handle 9 High pressure outlet 2 Trigger gun 10 Detergent suction tube with filter 3 Trigger gun safety lock 11 Quick connect nozzles 4 High pressure hose 12 Water inlet filter 5 Gas tank For engine details see engine manual. 6 Spray wand 7 Dipstick 8 Water inlet with garden hose connector English 3
ページ4に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS Read the operating instructions of flammable liquids. the engine manufacturer before Do not use acids, alkaline, solvents, start-up and follow the safety instruc- or any flammable material in this tions carefully. product. These products can cause physical injuries to the operator and WARNING irreversible damage to the machine. When using this product basic pre- cautions should always be followed, WARNING including the following: Gun Kicks Back – Hold w
ページ5に含まれる内容の要旨
Do not allow the high pressure hose Avoid tipping the machine on its to come into contact with the muffler side. guard. SAVE THESE INSTRUCTIONS Do not leave the machine running unattended. WATER SUPPLY (Cold Water Only) Do not operate pressure washer CAUTION without the water turned on. When connecting the water inlet to the water supply mains, local regula- tions of your water company must be observed. In some areas the unit must not be connected directly to the public drinking wa
ページ6に含まれる内容の要旨
ASSEMBLY INSTRUCTIONS STEP 1: Attach the handle to the frame of the pressure washer. Align holes, insert bolts, and tighten with knobs. STEP 6: Pull the spring-loaded collar of the wand back to insert your choice of quick connect nozzle. STEP 2: Mount the gun/hose storage handle. STEP 7: Release the collar and push the noz- zle until the collar clicks. STEP 3: Mount the nozzle holder with en- closed nylon rivets to the handle. WARNING High pressure in nozzle area. Risk of injury caus
ページ7に含まれる内容の要旨
STEP 8: Attach the high pressure hose to the spray gun. OPERATING INSTRUCTIONS STEP 5: CAUTION Connect garden hose to the cold wa- Do not run the engine with a high or low ter source and turn water on com- oil level as this can cause engine dam- pletely. age. Do not use hot water. If you have further questions regarding the engine, please refer to the engine STEP 6: manual included with the unit. Unlock the trigger gun safety lock. Trigger the gun to eliminate trapped STEP 1: air, wait
ページ8に含まれる内容の要旨
USING THE ACCESSORIES Make sure you hear a ‘click’ when in- Quick connect nozzles serting the nozzle tip into the wand. The color-coded quick connect nozzles Pull the nozzle to make sure it is provide a wide array of spray widths seated properly before operating from 0° to 65° and are easily accessible your unit. when placed in the convenient nozzle (See ASSEMBLY INSTRUCTIONS: holder. Step 6 and Step 7) 0° spray angle = Red nozzle WARNING For particularly stubborn accumulation To avo
ページ9に含まれる内容の要旨
WORKING WITH DETERGENTS Detergents can only be applied with ing detergents may affect the operation of the black detergent nozzle. the machine and void the warranty. STEP 1: Always Use Kärcher Detergent for Best Results Install the black detergent nozzle for Kärcher biodegradable detergents are detergent application (will work at specially formulated to protect the envi- low pressure only). ronment and your pressure washer. The STEP 2: special formula won’t clog the suction Fill a conta
ページ10に含まれる内容の要旨
TAKING A BREAK ..five minutes or more STEP 1: STEP 2: Move the engine stop switch to the Release trigger and engage gun OFF position. safety lock. For engine details see engine manu- al. SHUTTING DOWN & CLEAN-UP STEP 1: STEP 7: Remove detergent suction tube from Disconnect the high pressure hose container and insert into 1 gallon of from the high pressure outlet. fresh water. Siphon water at low pressure for one minute. STEP 2: Move the engine stop switch to the OFF position. Close the
ページ11に含まれる内容の要旨
WINTERIZING AND LONG-TERM STORAGE 1: Disconnect all water connections. CAUTION 2: Turn on the machine for a few Failure to follow the above directions seconds, until the water which had will result in damage to the pump as- remained in the pump exits, turn off sembly and accessories and will void immediately. the warranty. 3: Do not allow high pressure hose Kärcher also recommends the regular to become kinked. practice of using a pump protector like 4: Store the machine and access
ページ12に含まれる内容の要旨
new section of the cleaning surface, be sweeping motion keeping the spray sure to overlap the previous section to nozzle approximately 3-6 inches from eliminate stop marks and ensure a more the cleaning surface. Always clean from even cleaning result. top to bottom and from left to right. For removing extremely stubborn stains, CAUTION use the Dirtblaster Nozzle. Do not use Dirtblaster spray nozzle on wood surface as it may cause damage. Cars, Boats & Motorcycles House Siding (with or w
ページ13に含まれる内容の要旨
stubborn dirt, it may be necessary to For additional cleaning tips, visit our move the spray nozzle even closer to website at www.karcher-usa.com/ the surface for greater dirt cutting ac- home tion. CAUTION Optional Accessories Do not use Dirtblaster spray nozzle Optional accessories are available to on cloth, plastic or other sensitive further enhance your cleaning capabili- surfaces as it may cause damage. ties. These accessories are accurate as of the printing date of this manual.
ページ14に含まれる内容の要旨
TROUBLESHOOTING CAUTION Remove the spark plug cable to prevent accidental ignition of the engine before making any repair. Symptom Cause Solution Engine will not No gasoline Fill gas tank start Choke is not in the correct Slide choke lever out to position. closed position. Water pressure built up in the Squeeze the trigger to release machine. the pressure. For additional engine problems refer to the engine manual. Unit does not Diameter of garden hose is too Replace with a 5/8 inch or rea
ページ15に含まれる内容の要旨
Symptom Cause Solution No detergent. Detergent suction tube not prop- Check connection. erly connected to the machine. Detergent is too thick. Dilute detergent, for best re- sults use Kärcher detergent. Filter on detergent suction tube Run warm water through filter is clogged. to remove debris. Damaged or clogged detergent Remove obstruction or re- suction tube. place detergent suction tube. A high pressure nozzle is Replace with black detergent attached. nozzle. Spray nozzle is obstructed. B
ページ16に含まれる内容の要旨
MANUAL DE USUARIO DEL LIMPIADOR DE ALTA PRESIÓN siones de poca importancia o leves", o Vista general del modelo 17 daños materiales. Importantes instrucciones de seguri-18 dad Responsabilidades del propieta- Instrucciones de montaje 20 rio/usuario Instrucciones de funcionamiento 21 El propietario y/o el usuario deben com- Utilicación de los accesorios 22 prender bien las instrucciones de servi- cio y advertencias del fabricante antes Trabajar con detergentes 23 de empezar a utilizar este limpi
ページ17に含まれる内容の要旨
VISTA GENERAL DEL MODELO 1 Asa de transporte 8 Toma de agua con conector para manguera de jardín 2 Pistola de disparo 9 Salida de alta presión 3 Pestillo de seguridad de la pistola de disparo 10 Tubo de succión de detergente con filtro 4 Manguera de alta presión 11 Boquillas de conexión rápida 5 Depósito de gasolina 12 Dispositivo de filtrado en la entrada 6 Barra pulverizadora del agua 7 Varilla del aceite Consulte el manual del motor para más información sobre el motor. Español 17
ページ18に含まれる内容の要旨
INSTRUCCIONES IMPORTANTES DE SEGURIDAD Antes de la puesta en marcha, leer ADVERTENCIA el manual de instrucción del fabri- Peligro de inyección o daños perso- cante del motor, especialmente las nales graves - Mantenerse alejado indicaciones de seguridad. de la boquilla - No dirigir la desco- ADVERTENCIA nexión del chorro hacia personas. Esta máquina debe ser utilizada ex- Al utilizar este producto, tome siempre clusivamente por operarios cualifica- las precauciones básicas, incluidas l
ページ19に含まれる内容の要旨
La máquina tiene superficies calien- ATENCIÓN tes que pueden causar quemaduras. Riesgo de asfixia - usar este produc- Poner en funcionamiento el aparato to únicamente en una zona bien en un ambiente seguro y lejos de ni- ventilada. ños. Operar y repostar la máquina en una No tocar las superficies calientes o zona bien ventilada, donde no haya permitir a los accesorios que estén dispositivos con un piloto o llama en contacto con las superficies ca- abierta tales como bóiler, calentad
ページ20に含まれる内容の要旨
INSTRUCCIONES DE MONTAJE PASO 1: PASO 5: Conectar el mango al bastidor de la Conectar la barra con la pistola pul- limpiadora a presión. Alinear orifi- verizadora. cios, insertar pernos y apretar con la empuñadura. PASO 6: Colocar el cuello con resorte a la ba- PASO 2: rra para insertar la boquilla rápida de Montar el mango de almacenamien- conexión elegida. to de la pistola/manguera. PASO 7: Soltar el cuello y empujar la boquilla PASO 3: hasta que encaje. Monte el soporte de boquilla
