ページ1に含まれる内容の要旨
MODEL 2900 BDG, ITEM # 165915
Belt Driven Generator
M165915A
P rove n P e rf o r m a nce
OWNER’S MANUAL
00035
2900 BDG
Questions or comments? Call 1-800-270-0810
ページ2に含まれる内容の要旨
THANK YOU Thank you for purchasing a North Star Belt Driven Generator. Your machine is designed for long life, dependability, and the top performance you demand. Please take time now to read through this manual so you can better understand the machine’s operation, maintenance and safety precautions. Everyone who operates this generator must read and understand this manual. The time you take now will prolong your generator’s life and prepare you for its safe operation. Enjoy the exceptional p
ページ3に含まれる内容の要旨
SPECIFICATIONS Item Number #165915 Maximum Output 2900 Watts (W) Continuous Output 2600 Watts (W) Voltage 120 / 240 Volt (V) Phase Single phase (4-wire) Frequency 59.0-62.0 Hertz (Hz) Power Factor 100 % Engine 5 hp recommended Engine Speed 3540-3720 RPM 120 V Receptacle 15 Amp (A) duplex (NEMA 5-15R) 240 V Receptacle 15 Amp (A) duplex (NEMA 6-15R) Circuit Breaker 11 Amp (A) thermal, push to reset style Dimensions Length 13.75” (413 cm) Width 7.25” (184 cm) Height 7.75” (197 cm) Gross Weight
ページ4に含まれる内容の要旨
MACHINE COMPONENT IDENTIFICATION Figure 1 (Ref. 1-4) 00036 Ref. Description Ref. Description 1 Circuit Breakers 5 7/8” shaft 2 120V 15A Duplex Receptacle 6 Mounting feet 3 240V 15A Duplex Receptacle 7 Fan vents 4 Grounding screw Figure 2 (Ref. 5-7) 00037 3
ページ5に含まれる内容の要旨
GENERATOR FEATURES CAUTION indicates a potentially hazardous situation, which if not avoided, may result in minor or Reference 1 - Circuit Breakers. This belt driven moderate injury. It may also be used to alert against single phase generator has 2, 11 amp (A) push to unsafe practices. reset circuit breakers to protect against electrical overloads. Receptacles RULES FOR SAFE OPERATIONS Reference 2 - 120V Receptacle. The generator has a end cover with two duplexes (two receptacles in Safet
ページ6に含まれる内容の要旨
NEVER operate the generator under the following conditions: A. Excessive change in engine speed, slow or fast. B. Overheating in load connecting devices. C. Sparking or arcs from generator. D. Loss of electrical output. E. Damaged receptacles. F. Engine misfire. G. Excessive vibration. H. Enclosed compartments, or confined areas. I. Flame or smoke. J. Rain, snow or wet conditions. K. Operator non-attendance. WARNING Keep fire extinguisher close by your generator and be familiar on how to use
ページ7に含まれる内容の要旨
sufficient amounts must be brought in and exhausted out to ensure proper cooling of the engine and Starting Amps 120V, 60 Hz Motors generator. Hp motor Running RI type Cap type SP type Watts 1/6 525 7-11 9-18 16-22 1/4 700 9-15 12-23 22-32 LOAD APPLICATION 1/3 875 11-18 14-29 26-35 1/2 1175 15-25 20-40 NA It is important to determine the total electrical load 1 1925 24-40 32-64 NA before it is connected to the generator. The two major 1 1/2 2400 30-50 40-80 NA factors in determining
ページ8に含まれる内容の要旨
*Not recommended (a) Always use a voltage surge protector between CAUTION: Equipment damage can result from the the generator and these voltage sensitive loads. To low voltage caused by using an extension cord with a order a surge protector call customer service at 1- small wire size. 800-270-0810 and ask for item # 30793. Use this chart to estimate the total load on your (b) Hard-starting motors require 3 to 5 times the generator. rated running watts. (c) These loads may require up t
ページ9に含まれる内容の要旨
Output voltage should be checked periodically to ensure continued proper operation of the generating plant and appliances, it can be checked with a portable meter. Frequency can be checked by using an electric clock with a sweep second hand. Timed against a wrist watch or a stop watch the clock should be correct within +/- 2 seconds per minute. All speed setting adjustments should be done by a qualified technician. GENERATOR CARE The generator head is a two pole, 3600 RPM, 60 Hz, b
ページ10に含まれる内容の要旨
TROUBLESHOOTING Problem Possible Causes Possible Remedies Voltage too low. a) Engine speed too slow. a) Bring generator to a qualified technician for adjustment. b) Generator is overloaded. b) Reduce the load. (See Load Application section of this manual.) Circuit breaker trips. a) Defective load connected to generator. a) Disconnect load. b) Defective receptacle. b) Replace receptacle. c) Generator overloaded. c) Reduce the load. (See Load Application section of this manual.) Vo
