ページ1に含まれる内容の要旨
Black DIC F101
31Z07610 00X31-Z07-6100 EU2000i
Owner’s Manual
GENERATOR
EU2000i
See page 57 for
31Z07610 2eY110000.2006.12
Initial Use Instructions
00X31-Z07-6100 Printed in Japan o2001-2006 Honda Motor Co., Ltd. -All Rights Reserved
ページ2に含まれる内容の要旨
06/12/21 09:16:55 31Z07602_001 The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Exhaust contains poisonous carbon monoxide gas that can build up to dangerous levels in closed areas. Breathing carbon monoxide can cause unconsciousness or death. Never run the generator in a closed or even partially closed area where people may be present. The generator is a potential source of electrical shock if mis
ページ3に含まれる内容の要旨
06/12/21 09:12:29 31Z07602_002 INTRODUCTION Congratulations on your selection of a Honda generator. We are certain you will be pleased with your purchase of one of the finest generators on the market. We want to help you get the best results from your new generator and to operate it safely. This manual contains the information on how to do that; please read it carefully. As you read this manual, you will find information preceded by a symbol. That information is intended to help you avoid damage
ページ4に含まれる内容の要旨
A FEW WORDS ABOUT SAFETY Your safety and the safety of others are very important. And using this generator safely is an important responsibility. To help you make informed decisions about safety, we have provided operating procedures and other information on labels and in this manual. This information alerts you to potential hazards that could hurt you or others. Of course, it is not practical or possible to warn you about all the hazards associated with operating or maintaining a generator. Yo
ページ5に含まれる内容の要旨
06/12/21 09:12:34 31Z07602_004 CONTENTS GENERATOR SAFETY ............................................................................... 5 Safety Label Locations ........................................................................ 5 Important Safety Information ............................................................. 7 COMPONENT IDENTIFICATION ............................................................... 9 CONTROLS ......................................................................
ページ6に含まれる内容の要旨
06/12/21 09:12:37 31Z07602_005 MAINTENANCE ....................................................................................... 36 The Importance of Maintenance ....................................................... 36 Maintenance Safety ........................................................................... 37 Emission Control System Information ............................................. 38 Air Index ....................................................................................
ページ7に含まれる内容の要旨
06/12/21 09:17:03 31Z07602_006 GENERATOR SAFETY SAFETY LABEL LOCATIONS These labels warn you of potential hazards that can cause serious injury. Read them carefully. If a label comes off or becomes hard to read, contact your Honda generator dealer for a replacement. 5
ページ8に含まれる内容の要旨
6
ページ9に含まれる内容の要旨
06/12/21 09:17:11 31Z07602_008 IMPORTANT SAFETY INFORMATION Honda generators are designed to give safe and dependable service if operated according to instructions. Read and understand this owner’s manual before operating your generator. You can help prevent accidents by being familiar with your generator’s controls, and by observing safe operating procedures. Operator Responsibility Know how to stop the generator quickly in case of emergency. Understand the use of all generator controls, output
ページ10に含まれる内容の要旨
06/12/21 09:17:22 31Z07602_009 Electric Shock Hazards The generator produces enough electric power to cause a serious shock or electrocution if misused. Using a generator or electrical appliance in wet conditions, such as rain or snow, or near a pool or sprinkler system, or when your hands are wet, could result in electrocution. Keep the generator dry. If the generator is stored outdoors, unprotected from the weather, check all of the electrical components on the control panel before each use. M
ページ11に含まれる内容の要旨
06/12/21 09:12:43 31Z07602_010 COMPONENT IDENTIFICATION PARALLEL OPERATION OUTLETS TM ECO-THROTTLE SWITCH AC RECEPTACLES OIL ALERT INDICATOR LIGHT OVERLOAD INDICATOR LIGHT DC RECEPTACLE OUTPUT INDICATOR LIGHT DC CIRCUIT PROTECTOR AC CIRCUIT PROTECTOR GROUND TERMINAL FUEL TANK CAP VENT LEVER CHOKE LEVER FUEL TANK CAP MAINTENANCE COVER STARTER GRIP ENGINE SWITCH 9
ページ12に含まれる内容の要旨
06/12/21 09:12:49 31Z07602_011 SPARK PLUG MAINTENANCE COVER SPARK PLUG MUFFLER FRAME SERIAL NUMBER AIR CLEANER Record the frame serial number for your future reference. Refer to this serial number when ordering parts, and when making technical or warranty inquiries (see page ). 62 Frame serial number: Date purchased: 10
ページ13に含まれる内容の要旨
06/12/21 09:12:58 31Z07602_012 CONTROLS ENGINE SWITCH To start and stop the engine. Switch position: OFF: To stop the engine. ON: To start and run the engine. ENGINE SWITCH O ON N O OF FF F STARTER GRIP To start the engine, pull the starter grip lightly until you feel resistance, then pull briskly in the direction of the arrow as shown below. Do not allow the starter grip to snap back against the engine. Return it gently to prevent damage to the starter. STARTER GRIP D Diir re ec ct tiio on n t
ページ14に含まれる内容の要旨
06/12/21 09:13:08 31Z07602_013 FUEL TANK CAP VENT LEVER The fuel tank cap is provided with a vent lever to seal the fuel tank. The vent lever must be in the ON position for the engine to run. When the engine is not in use, leave the vent lever in the OFF position to reduce the possibility of fuel leakage. Allow the engine to cool well before turning the vent lever to the OFF position. NON-CALIFORNIA TYPE CALIFORNIA TYPE O OF FF F O OF FF F O ON N O ON N FUEL TANK CAP VENT LEVER FUEL TANK CAP VEN
ページ15に含まれる内容の要旨
OUTPUT INDICATOR LIGHT The output indicator light (green) is illuminated when the generator is operating normally. It indicates that the generator is producing electrical power at the receptacles. OUTPUT INDICATOR LIGHT (GREEN) OVERLOAD INDICATOR LIGHT If the generator is overloaded (in excess of 2,000 VA), or if there is a short circuit in a connected appliance, the overload indicator light (red) will go ON. The overload indicator light (red) will stay ON, and after about four seconds, current
ページ16に含まれる内容の要旨
06/12/21 09:13:17 31Z07602_015 OIL ALERT SYSTEM The Oil Alert system is designed to prevent engine damage caused by an insufficient amount of oil in the crankcase. Before the oil level in the crankcase can fall below a safe limit, the Oil Alert indicator light comes on and the Oil Alert system automatically will stop the engine (the engine switch will remain in the ON position). If the engine stops or the Oil Alert indicator light comes on when you pull the starter grip, check the engine oil lev
ページ17に含まれる内容の要旨
06/12/21 09:13:27 31Z07602_016 TM ECO-THROTTLE SWITCH TM The Eco-Throttle system automatically reduces engine speed when all loads are turned off or disconnected. When appliances are turned on or reconnected, the engine returns to the proper speed to power the electrical load. If high electrical loads are connected simultaneously, turn the Eco- Throttle switch to the OFF position to reduce voltage changes. When using the DC output, turn the Eco-Throttle switch to the OFF position. ON: Recommende
ページ18に含まれる内容の要旨
06/12/21 09:17:33 31Z07602_017 AC CIRCUIT PROTECTOR The AC circuit protector will automatically switch OFF if there is a short circuit or a significant overload of the generator at the AC receptacles. If the circuit protector switches OFF automatically, check that the appliance is working properly and does not exceed the rated load capacity of the circuit before resetting the circuit protector ON. AC RECEPTACLES AC CIRCUIT PROTECTOR ON OFF PUSH AC CIRCUIT PROTECTOR DC RECEPTACLE The DC receptacl
ページ19に含まれる内容の要旨
05/12/26 17:07:15 31Z07602_018 GENERATOR USE CONNECTIONS TO A BUILDING ELECTRICAL SYSTEM Connections for standby power to a building electrical system must be made by a qualified electrician. The connection must isolate the generator power from utility power, and must comply with all applicable laws and electrical codes. Improper connections to a building electrical system can allow electrical current from the generator to backfeed into the utility lines. Such backfeed may electrocute utility co
ページ20に含まれる内容の要旨
06/12/21 09:17:38 31Z07602_019 SPECIAL REQUIREMENTS Keep all cooling holes open and clear of debris, mud, water, etc. Cooling holes are located on the side panel, the control panel, and the bottom of the generator. If the cooling holes are blocked, the generator may overheat and damage the engine, inverter, or windings. Do not lay the generator on its side when moving, storing, or operating it. Oil may leak and damage the engine or your property. There may be Federal or State Occupational Safety
