ページ1に含まれる内容の要旨
Module No. 5078
MA0904-EA
ページ2に含まれる内容の要旨
About This Manual • Depending on the model of your watch, display text appears either as dark figures on a light background or light figures on a dark background. All sample displays in this manual are shown using dark figures on a light background. • Button operations are indicated using the letters shown in the illustration. • For the sake of simplicity, the sample displays in this manual do not show the analog hands of the watch. • Each section of this manual provides you with the information
ページ3に含まれる内容の要旨
• To ensure that this watch provides you with the years of service for which it is designed, be sure to carefully read and follow the instructions under “Operating Precautions” and “User Maintenance”. • Be sure to keep all user documentation handy for future reference. E-2
ページ4に含まれる内容の要旨
Contents General Guide ......................................................................................................... E-6 Timekeeping ............................................................................................................ E-8 World Time ............................................................................................................ E-17 Countdown Timer ................................................................................................. E-1
ページ5に含まれる内容の要旨
Procedure Lookup The following is a handy reference list of all the operational procedures contained in this manual. To set the digital time and date ........................................................................... E-11 To toggle the Timekeeping Mode digital time between DST and Standard Time .................................................................... E-14 To adjust the analog time ..................................................................................... E-15 To v
ページ6に含まれる内容の要旨
To test the alarm ................................................................................................... E-29 To turn an alarm on and off ................................................................................. E-30 To turn the Hourly Time Signal on and off ......................................................... E-31 To turn on illumination manually ........................................................................ E-33 To specify the illumination duration .........
ページ7に含まれる内容の要旨
General Guide • Press C to change from mode to mode. • In any mode (except when a setting screen is on the display), press B to illuminate the display. Timekeeping Mode World Time Mode Countdown Timer Mode Press . E-6
ページ8に含まれる内容の要旨
Stopwatch Mode Alarm Mode Hand Setting Mode E-7
ページ9に含まれる内容の要旨
Timekeeping This watch features separate digital and analog timekeeping. The procedures for setting the digital time (page E-11) and analog time (page E-15) are different. • In the Timekeeping Mode, you can press D to change the display format as shown below. E-8
ページ10に含まれる内容の要旨
Day of the Week Month – Day Hour : Minutes Seconds PM indicator Press . Day of week Month – Day Hour : Minutes E-9
ページ11に含まれる内容の要旨
Digital Time and Date Use the Timekeeping Mode to set and view a digital display of the current time and date. When setting the digital time, you can also configure settings for summer time (Daylight Saving Time or DST), your Home City code (the code for the city where you normally use the watch), the 12/24-hour format, and the illumination duration. • This watch is preset with a number of city codes, each of which represents the time zone where that city is located. When setting the digital tim
ページ12に含まれる内容の要旨
To set the digital time and date 1. In the Timekeeping Mode, hold down A until the seconds start to flash, which indicates the setting screen. 2. Press C twice to move the flashing to the Home City code setting (see the illustration below), and then use B and D to select the code you want. • Make sure you select your Home City code before changing any other setting. • For full information on city codes, see the “City Code Table” at the back of this manual. 3. Press C to move the flashing in the
ページ13に含まれる内容の要旨
4. When the setting you want to change is flashing, use B and D to change it as described below. Screen To do this: Do this: Reset the seconds to 00 Press D. Toggle between Daylight Saving Time ( ) and Press D. Standard Time ( ) Change the Home City code Use D (east) and B (west). Change the hour or minutes Use D (+) and B (–). Toggle between 12-hour (12H) and 24-hour Press D. (24H) timekeeping Change the year Use D (+) and B (–). Change the month or day Select one second ( ) or three seconds (
ページ14に含まれる内容の要旨
5. Press A to exit the setting screen. • Resetting the seconds only (without changing the DST, Home City code, hour, or minute setting) causes the analog minute hand setting to be adjusted automatically. • See “Digital Time Daylight Saving Time (DST) Setting” below for details about the DST setting. • The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is applied in all modes. • For details about illumination duration, see “Illumination” on page E-32. Digital Time Daylight
ページ15に含まれる内容の要旨
To toggle the Timekeeping Mode digital time between DST and Standard Time 1. In the Timekeeping Mode, hold down A until the seconds start to flash, which indicates the setting screen. 2. Press C once to display the DST setting screen. 3. Press D to toggle between Daylight Saving Time ( displayed) and Standard Time ( displayed). 4. Press A to exit the setting screen. • The DST indicator appears on the Timekeeping, Alarm, and Hand Setting Mode to indicate that Daylight Saving DST indicator Time i
ページ16に含まれる内容の要旨
Setting the Analog Time Perform the procedure below when the time indicated by the analog hands does not match the time of the digital display. To adjust the analog time 1. In the Timekeeping Mode, press C five times to enter the Hand Setting Mode (page E-7). 2. Hold down A until the current digital time starts to flash, which indicates the analog setting screen. 3. Press D to advance the analog time setting by 20 seconds. • Holding down D advances the analog time setting at high speed. E-15
ページ17に含まれる内容の要旨
• If you need to advance the analog time setting a long way, hold down D until the time starts advancing at high speed, and then press B. This locks the high- speed hand movement, so you can release the two buttons. High-speed hand movement continues until you press any button. It will also stop automatically after the time advances 12 hours or if an alarm (daily alarm, Hourly Time Signal, or countdown beeper) starts to sound. 4. Press A to exit the setting screen. • The watch will automatically
ページ18に含まれる内容の要旨
World Time World Time digitally displays the current time in 27 cities City code (29 time zones) around the world. • All of the operations in this section are performed in the World Time Mode, which you enter by pressing C (page E-6). To view the time in another city In the World Time Mode, press D to scroll eastwardly through city codes. • For full information about city codes, see the “City Code Table” at the back of this manual. • If the current time shown for a city is wrong, it probably Cu
ページ19に含まれる内容の要旨
To toggle a city code time between Standard Time and Daylight Saving Time 1. In the World Time Mode, use D to display the city code whose Standard Time/Daylight Saving Time setting you want to change. 2. Hold down A for about two seconds to toggle between Daylight Saving Time (DST indicator displayed) and Standard Time (DST indicator not displayed). • The DST indicator is on the display whenever you display a city code for which Daylight Saving Time is DST indicator turned on. • Note that the D
ページ20に含まれる内容の要旨
Countdown Timer The countdown timer can be set within a range of one minute to 60 minutes. An alarm sounds when the countdown reaches zero. The countdown timer also has an auto-repeat feature and a progress beeper that signals the progress of the countdown. • All of the operations in this section are performed in the Countdown Timer Mode, which you enter by pressing C (page E-6). Configuring the Countdown Timer Minutes The following are the settings you should configure before Seconds actually
