ページ1に含まれる内容の要旨
30
30
30
30
30
MA0804-EG
Operation Guide 4343
Before using the watch...
Expose the watch to light Power Saving
Your watch runs on electrical power generated from light and stored Power Saving causes the watch to enter a sleep state automatically
by a chargeable battery. Long-term storage of the watch can cause and stop movement of the analog hands in order to save power
the battery to run low, so be sure to expose the watch to light for whenever it is left in the dark. The watch will exit the sl
ページ2に含まれる内容の要旨
1 1 30 Operation Guide 4343 How the solar cell and battery work Charging Precautions Solar Charging Avoid charging the watch in the following locations, and anywhere When exposed to light else where the watch may become very hot. • On the dashboard of an automobile parked in the sun Your watch runs on electrical power generated from light and stored by a chargeable battery. To ensure stable operation, make sure that the Light • Very close to an incandescent light source or other sources of Sol
ページ3に含まれる内容の要旨
30 30 30 Operation Guide 4343 Receiving the Calibration Signal At the start of the receive How a Radio-controlled Watch Works There are two methods you can use in order to receive the time operation calibration signal. • The indicator hand will move to “READY”. • The hour and minute hands will remain at their normal positions. What is a radio-controlled watch? Calibration Signal Auto Receive • The second hand will stop at “0”. Up to six times per day A radio-controlled watch is designed to recei
ページ4に含まれる内容の要旨
30 30 30 Operation Guide 4343 Location Calibration Signal Reception Troubleshooting Reception is difficult and may even be impossible in the locations Precautions described below. Avoid such locations when performing signal 1. The watch cannot receive the time calibration signal. 2. Time calibration signal reception is successful, but the • Auto receive is disabled while the watch is in the Chronograph reception. hourly time signal and current time are slightly off. • Is there something in the i
ページ5に含まれる内容の要旨
30 30 30 30 30 30 30 Operation Guide 4343 ❚ To check the current summer time on/ ❚ To turn summer time on or off Using World Time off setting 1. In the World Time Mode, use the DDDDD button to select the In the World Time Mode, press World Time lets you display the current time in any one of 27 cities ❚ To search for a city city code whose summer time setting you want to the AAAAA button. (29 time zones) around the world. change. (Indicates zone) • The second hand moves to “0” In the World Time
ページ6に含まれる内容の要旨
30 30 30 30 30 30 30 30 30 Operation Guide 4343 ❚ To set the alarm time 3. When everything is the Using the Alarms Example: To change the alarm setting from midnight to 3:00 p.m. way you want, press the AAAAA button to exit the alarm setting mode. ON The watch beeps for 10 seconds when the Timekeeping Mode time 1. In the Alarm Mode, hold ❚ To turn the alarm on or off reaches the currently set alarm time. down the AAAAA button for • This will exit the alarm setting about five seconds until • The
ページ7に含まれる内容の要旨
30 30 1 1 30 30 30 30 30 Operation Guide 4343 Chronograph Hands Hour and Minute Hands 3. Press the CCCCC button. 5. Press the CCCCC button. Home Position Adjustment 24-hour Hand • This will cause the hour hand, • This will cause the minute hand, and 24-hour chronograph hour and minute hand to move to their home hands to move to their home If the time setting of your watch is not correct even though time calibration signal reception is being performed normally, use the positions. positions. pro
