ページ1に含まれる内容の要旨
MO1103-EA
Operation Guide 5114 5214
ENGLISH
Congratulations upon your selection of this CASIO watch.
Applications
The built-in sensors of this watch measure direction, barometric pressure, temperature and altitude.
Measurement results are indicated by the second hand of the watch and on the digital display. Such
features make this watch useful when hiking, mountain climbing, or when engaging in other such outdoor
activities.
Warning !
• The measurement functions built into this watch are not
ページ2に含まれる内容の要旨
Operation Guide 5114 5214 E-82 Checking the Current Time in a Different Time Zone Charging the Watch E-82 To enter the World Time Mode The face of the watch is a solar cell that generates power from light. The generated power charges a E-82 To view the time in another time zone built-in rechargeable battery, which powers watch operations. The watch charges whenever it is exposed E-83 To specify standard time or daylight saving time (DST) for a city to light. E-84 To swap your Home City and Wor
ページ3に含まれる内容の要旨
Operation Guide 5114 5214 Approximate Reception Ranges • Even when the watch is within range of a transmitter, signal reception may be impossible due to the effects of geographic contours, structures, weather, the time of year, the time of day, radio interference, UK and German Signals North American Signal etc. The signal becomes weaker at distances of approximately 500 kilometers, which means that the infl uence of the conditions listed above becomes even greater. • Signal reception may not
ページ4に含まれる内容の要旨
Operation Guide 5114 5214 Selecting a Mode • You can use buttonsA,B, andC to enter a sensor mode directly from the Timekeeping Mode or • The illustration below shows which buttons you need to press to navigate between modes. from another sensor mode. To enter a sensor mode from the Data Recall, Stopwatch, Countdown • To return to the Timekeeping Mode from any other mode, hold downD for about two seconds. Timer, Alarm, World Time, Receive, or Hand Home Position Adjustment Mode, fi rst enter the
ページ5に含まれる内容の要旨
SE SE ESE ESE E E ENE ENE NE NE NNE NNE N N NNW NNW Operation Guide 5114 5214 3. PressD to cycle through the available settings on the digital display in the sequence shown below. Display To do this: Do this: 12/24-Hour Change the year City Code DST Seconds Hour Minute Year Format UseA (+) andC (–). Change the month or day Thermometer/Barometer/ Auto Light Illumination Button Operation Day Month Altitude unit On/Off Duration Tone On/Off 5. PressE to exit the setting screen. • The hands o
ページ6に含まれる内容の要旨
Operation Guide 5114 5214 4. PressC to start the calibration operation. 3. Rotate the map without moving the watch so the northerly direction Nor North indicated th indicated • - - - is shown on the digital display while calibration is being performed. When calibration is indicated on the map matches north as indicated by the watch. on the map on the map successful, the digital display will show OK and then change to the Compass Mode screen (- - - ). • If the watch is confi gured to indic
ページ7に含まれる内容の要旨
Operation Guide 5114 5214 Barometer/Thermometer Mode Second Hand Units Pressure Sensor and Temperature Sensor Calibration The second hand indicates barometric The pressure sensor and temperature sensor built into the watch are calibrated at the factory and normally pressure differentials up to ±10hPa (in require no further adjustment. If you notice serious errors in the pressure readings and temperature Curr Current pr ent pressur essure e 1-hPa units). gr greater than most eater than most re
ページ8に含まれる内容の要旨
Operation Guide 5114 5214 Using the Altitude Differential Value In the Altimeter Mode, the part of the watch’s dial from 11 o’clock to 7 Current altitude Altitude dif Altitude differ ferential ential 1000 m (4000 ft) 500 m (2000 ft) o’clock acts as an altitude differential scale. The second hand points to a reading greater than indicated by second hand indicated by second hand previous reading place on the scale that indicates the difference between the altitude at a Unit: 50 m (200 ft) 100
ページ9に含まれる内容の要旨
Operation Guide 5114 5214 Auto Save Values The total Cumulative Ascent and Cumulative Descent values produced by an Altimeter Mode measurement session during the example climb illustrated above are calculated as follows. While the altitude auto measurement method is being used (page E-55), the watch automatically stores Cumulative Ascent: q q (300 m) +e e (620 m) = 920 m high altitude ( HI), low altitude ( LO), cumulative ascent ( ASC), and cumulative descent ( DSC) values. Cumulative Desc
ページ10に含まれる内容の要旨
Operation Guide 5114 5214 Manual Save 1 Manual Save 14 High Altitude (HI) Viewing Altitude Records Use the Data Recall Mode to view manual save altitude records and automatically saved high altitude, low Hour : Minutes altitude, cumulative ascent, and cumulative descent values. Altitude records are created and saved in the 1 second 1 second Altimeter Mode. 1 second To view altitude records 1. UseD to select the Data Recall Mode ( REC) as shown on page E-24. 2. UseA andC to scroll through altit
ページ11に含まれる内容の要旨
Operation Guide 5114 5214 To set an alarm time To test the alarm 1. In the Alarm Mode, useA andC to scroll through the alarm (–1 In the Alarm Mode, hold downA to sound the alarm tone. through –5) until the one whose time you want to set is displayed. To turn an alarm and the Hourly Time Signal on and off 1. In the Alarm Mode, useA andC to select an alarm or the Hourly Time Signal. −1 −2 −3 2. When the alarm or the Hourly Time Signal you want is selected, pressB to toggle it between ( ON) and of
ページ12に含まれる内容の要旨
Operation Guide 5114 5214 4. After adjusting the hour hand and minute hand home positions, pressE. Adjusting Home Positions Manually • After adjusting the home positions of the hands, leave the watch in a location where time calibration signal reception is good and perform manual receive. Next, check to make sure that the hands are Strong magnetism or impact can cause the hands of the watch to be off, even if the watch is able to indicating the time correctly. See “To perform manual receive
ページ13に含まれる内容の要旨
Operation Guide 5114 5214 Troubleshooting Sensor modes ■ I can’t change the temperature, barometric pressure, and altitude units. Time Setting When TOKYO ( TYO) is selected as the Home City, the altitude unit is set automatically to meters (m), the See “Radio Controlled Atomic Timekeeping” (page E-15) for information about adjusting the time setting barometric pressure unit to hectopascals (hPa), and the temperature unit to Celsius ( °C). These settings according to a time calibration si
ページ14に含まれる内容の要旨
Operation Guide 5114 5214 Thermometer: Pressure Sensor Precision: Measurement and display range: –10.0 to 60.0 °C (or 14.0 to 140.0 °F) Conditions (Altitude) Altimeter Barometer Display unit: 0.1 °C (or 0.2 °F) Measurement timing: Every fi ve seconds in the Barometer/Thermometer Mode ± (altitude differential × 2% 0 to 6000 m + 15 m) m Other: Calibration; Manual measurement (button operation) 0 to 19680 ft. ± (altitude differential × 2% ± (pressure differential × 2% Altimeter: + 50 ft.) ft. Fix
