ATD Tools Atd-7449の取扱説明書

ページ1に含まれる内容の要旨

Pin Style
Jack Stands
Operating Instructions & Parts Manual
Model Number Capacity per pair
Atd-7447 10 Ton
Atd-7449 22 Ton
Models Atd-7447 Model Atd-7449
Atd Tools Inc.
160 Enterprise Drive, Wentzville MO 63385
Printed in China
ATD7447-M0 12/06

ページ2に含まれる内容の要旨

For your safety, read, understand, and follow the information provided with and on these jack stands. The owner and operator shall have an understanding of these jack stands and safe operating procedures before attempting to use. The owner and operator shall be aware that use of this product may require special skills and knowledge. Instructions and safety information shall be conveyed in the operator’s native language before use of these stands is authorized. Make certain that the operator

ページ3に含まれる内容の要旨

BEFORE USE OPERATION 1. Inspect stands before each use. Do not use if bent, IMPORTANT! Rated capacity is per pair. Use ONLY broken or cracked components are noted. Ensure one pair per vehicle. No alterations shall be made to that all parts move freely. this device. Do not use adapters or accessories on the 2. Verify that the product and the application are saddle or base frame. compatible, if in doubt call Atd Tools Technical 1. Adjust saddle height by pulling up the extension tube, Servi

ページ4に含まれる内容の要旨

ONE YEAR LIMITED WARRANTY For a period of one (1) year from date of purchase, ATD Tools Inc. will repair or replace, at its option, without charge, any of its products which fails due to a defect in material or workmanship under normal usage. This limited warranty is a consumer's exclusive remedy. Performance of any obligation under this warranty may be obtained by returning the warranted product, freight prepaid, to ATD Tools Inc. Warranty Service Department,160 Enterprise Drive, Wentzvill