ページ1に含まれる内容の要旨
Operating and Maintaining
the P20 Console
Precor Incorporated P20 Console OM 300753-201, en
20031 142nd Avenue NE 28 June 2011
P.O. Box 7202
Woodinville, WA USA 98072-4002
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
ページ4に含まれる内容の要旨
Edition Information OPERATING AND MAINTAINING THE P20 CONSOLE P/N 300753-201 rev B Copyright © June 2011 Precor Incorporated. All rights reserved. Specifications subject to change without notice. Trademark Note Precor, AMT, and EFX are registered trademarks and Preva is a trademark of Precor Incorporated. Other names in this document may be the trademarks or registered trademarks of their respective owners. Intellectual Property Notice All rights, title, and interests in and to th
ページ5に含まれる内容の要旨
Important Safety Instructions This apparatus (hereinafter referred to as the console) is intended to be shipped with new Precor exercise equipment (hereinafter referred to as the base unit). It is not packaged for individual sale. To prevent injury, the console must be WARNING attached securely to the base unit following all assembly and installation instructions shipped with the base unit. The console is intended to be connected to AC mains power through the furnished power supply
ページ6に含まれる内容の要旨
4 Operating and Maintaining the P20 Console Il est conseillé de subir un examen médical complet avant d’entreprendre tout programme d’exercise. Si vous avez des étourdissements ou des faiblesses, arrêtez les exercices immédiatement. Do not allow children, or people unfamiliar with the operation of this equipment, on or near it. Do not leave children unsupervised around the equipment. Make sure all users wear proper exercise clothing and shoes for their workouts and avoid loose o
ページ7に含まれる内容の要旨
Important Safety Instructions 5 Proper Location for Equipment For all equipment other than treadmills: Locate at least 40 inches (1 meter) away from walls or furniture on either side of the equipment, and 40 inches (1 meter) away from objects behind the equipment. For treadmills: Locate at least 40 inches (1 meter) away from walls or furniture on either side of the treadmill, and at least 80 inches (2 meters) away from objects behind the treadmill. Important: These location
ページ8に含まれる内容の要旨
6 Operating and Maintaining the P20 Console Use the equipment only for its intended purpose as described in this manual. Do not use accessory attachments that are not recommended by Precor. Such attachments may cause injuries. Do not operate the equipment where aerosol (spray) products are being used or where oxygen is being administered. Do not use outdoors. Do not attempt to service the equipment yourself, except to follow the maintenance instructions in this manual. Nev
ページ9に含まれる内容の要旨
Important Safety Instructions 7 In accordance with the European WEEE Directive, electrical and electronic equipment (EEE) is to be collected separately and to be reused, recycled, or recovered at end of life. Users of EEE with the WEEE label per Annex IV of the WEEE Directive must not dispose of end of life EEE as unsorted municipal waste, but use the collection framework available to customers for the return, recycling, and recovery of WEEE. Customer participation is important to mini
ページ10に含まれる内容の要旨
8 Operating and Maintaining the P20 Console Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Per FCC rules, changes or modifications not WARNING expressly approved by the manufacturer could void the user’s authority to operate the equipment. Industry Canada This device complies with RSS-210:2007 of the Spectr
ページ11に含まれる内容の要旨
Important Safety Instructions 9 Electrical Recommendations: 120 V and 240 V Treadmills Note: This is a recommendation only. NEC (National Electric Code) guidelines or local region electric codes must be followed. You should have received a power cable that meets your local electrical code requirements along with the equipment. Precor treadmills must be connected to a 20 amp individual branch circuit that can be shared only with one PVS. If you need additional help with the power conn
ページ12に含まれる内容の要旨
10 Operating and Maintaining the P20 Console Electrical Recommendations: All Equipment Excluding Treadmills Note: This is a recommendation only. NEC (National Electric Code) guidelines or local region electric codes must be followed. For equipment fitted with a P80 console or Personal Viewing System (PVS) screen a separate power connection is required. For a 20 amp branch circuit up to 10 screens can be connected. If the branch circuit has any other devices plugged into the circuit t
ページ13に含まれる内容の要旨
Table of Contents Important Safety Instructions ................................................... 3 Safety Precautions .................................................................................3 Hazardous Materials and Proper Disposal .................................... 6 Product Recycling and Disposal ....................................................... 6 Regulatory Notices for Cardiovascular Exercise Equipment ..............................................................
ページ14に含まれる内容の要旨
12 Operating and Maintaining the P20 Console
ページ15に含まれる内容の要旨
Chapter 1 Getting Started The P20 console offers administrators and members the ability to set defaults that meet their specific needs. Activating the Console for Self-Powered Equipment Precor equipment is either self-powered or externally powered using an optional power adapter. Self-powered equipment requires the user exercise to initialize the console. This section provides more detail about powering equipment. Activating the Console for Self-Powered Equipment On self-powered
ページ16に含まれる内容の要旨
14 Operating and Maintaining the P20 Console Optional Use of the Power Adapter An optional AC power adapter provides sustained power to the equipment. This adapter allows you to change settings without having to pedal the equipment. To purchase the power adapter, contact your dealer. If you purchase the optional power adapter, you must also purchase the internal cable kit. The kit supplies the cable, bracket, and fasteners that connect the power adapter to the lower electronics board.
ページ17に含まれる内容の要旨
Chapter 2 Setting Up the Console Use the System mode to configure settings in ways that benefit your users and your facility. The System menu is visible only to administrators and registered service technicians. Changes made to these settings are saved to the fitness equipment. The system settings are: Odometer Settings Club Settings
ページ18に含まれる内容の要旨
16 Operating and Maintaining the P20 Console Identifying Parts of the Console The following diagram provides information about the console keys. The number and actions of the console keys may differ slightly depending on the type of equipment. Figure 4: P20 Console Display Note: Some equipment has both an intensity (resistance) indicator and an incline indicator. Other equipment may only have one type of indicator. Table 1. Parts of the P20 console display Number Part Name Details
ページ19に含まれる内容の要旨
Setting Up the Console 17 Number Part Name Details Enter key Workout key Displays preset workouts Input Up key Use to navigate user menus Input Down Use to navigate user menus key GO key Use to begin your workout Reset key (Pause/Reset on tread consoles) Intensity Displays level of resistance. This window indicator can appear on single and dual indicator equipment. Incline Displays level of incline indicator Treadmill, EFX Incline Up Increases incline level T
ページ20に含まれる内容の要旨
18 Operating and Maintaining the P20 Console On self-powered equipment, the battery initializes when you begin working out. You must maintain a minimum rate of motion for the Welcome banner to appear. PEDAL FASTER (or the equivalent message depending on the equipment type) appears in the display when the battery is low or when the rate of motion drops below the minimum requirements. Viewing the Odometer Informational Menu Each piece of equipment provides information about its use,
