ページ1に含まれる内容の要旨
®
TOP FREEZER REFRIGERATOR
i
CONGELADOR SUPERIOR REFRIGERADOR
CONGI_LATEUR SUPI_RIEUR REFRIGI_RATEUR
Models / Modelos / Mod_les
795.6997_,795.6991_
795.7997_,795.7991_
795.6937_,795.6929_
795.7937_,795.7929_
= color number, n_mero de colo_ num_ro de couleur
tl1
Z
O
t=,
m
cn
z
m
Z_
O
r=,,
"13
Z
m
MFL61920619 Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. www.sears.cem
Printed in Mexico
ページ2に含まれる内容の要旨
2O 3-4 Warranty and Product Record Crisper Humidity Control Door Racks 20-21 5-6 Safety instructions 21 Door Bins 21 Dairy Bin/Can Rack 6 Grounding Requirements 21 Ice Tray Parts and Features 7 22-23 Care and Cleaning 8-15 Refrigerator installation 22 General Cleaning Tips 8 Unpacking Your Refrigerator Outside 22 Installation 8 22 Inside Walls Base Grill 8 Door Liner and Gaskets 22 9-10 Removing and Replacing Doors 22 Plastic Parts 10-15 Reversing Doors 22-23 Light Bulb Replacement 15 Leveling a
ページ3に含まれる内容の要旨
TOP FREEZER REFRIGERATOR ® Kenrnore Appliance Warranty forte Year Limited Warranty When installed, operated and maintained according to all instructions supplied with the product, if this appliance fails due to a defect in material or workmanship within one year from the date of purchase, call 1-800-4-MY-HOME '°_to arrange for free repair. If this appliance is used for other than private family purposes, this warranty applies for only 90 days from the date of purchase. This Warranty covers only
ページ4に含まれる内容の要旨
Master Protection Agreements Congratulations on making a smart purchase. Your new Once you purchase the Agreement, a simple phone call is Kenmor# _ product is designed and manufactured for years all that it takes for you to schedule service. You can call of dependable operation. But like all products, it may anytime day or night, or schedule a service appointment online. require preventive maintenance or repair from time to time. That's when having a Master Protection Agreement can The Master Pr
ページ5に含まれる内容の要旨
Thisguidecontains manyimportant safetymessages. Alwaysreadandobeyallsafetymessages. Thisisthesafetyalertsymbol. It alerts you to safety messages that inform you of hazards that can kill or hurt you or others, or cause damage to the product. All safety messages will be preceded by the safety alert symbol and the hazard signal word DANGER, WARNING or CAUTION. These words mean: You will be killed or seriously injured if you don't follow instructions. You can be killed or seriously injured if you do
ページ6に含まれる内容の要旨
This appliance is not intended for use by persons (including children) with reduce physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Child entrapment and suffocation are not problems of Before you throw away your old the past. Junked or abandoned refrigerators a
ページ7に含まれる内容の要旨
© Use this section to become more familiar with the parts and features. Page references are included for your convenience. NOTE: This guide covers several different models. The refrigerator you have purchased may have some or all of the items listed below. The locations of the features shown betow may not match your model. O CustomCube Ice maker * O Ice Bin * OFreezer Door Racks Freezer Shelf OCan Rack* _ Digital Temperature Control ODairy Bin Refrigerator Light O Door Bins _t Snack Drawer Refri
ページ8に含まれる内容の要旨
NOTE: For proper air circulation, best cooling and energy consumption results, maintain a minimum distance of 2 inches (5.08cm) from adjacent items and surfaces. Excessive WeightHazard Usetwoormorepeopleto moveandinstall refrigerator. Failure to do so can result in back or other injury. UNPACKING YOUR REFRIGERATOR Remove tape and any temporary labels from your refrigerator before using. Do not remove any warning-type labels or the model and serial number label. To remove any remaining tape or gl
ページ9に含まれる内容の要旨
ELECTRICAL SHOCK HAZARD Before youbegin, eitherunplug therefrigerator orturnoffpoweratthecircuitbreaker orfusebox.Remove food andanyAdjustable DoororUtilityBinsfromdoors. Failure todosocouldresult indeathorserious injury. Ifentrance islessthan35-inches wide, REMOVE REFRIGERATOR DOOR therefrigerator's doorswillneedto beremoved. • Loosen and remove the 2 bolts and the phillips head screw to remove the Middle Hinge Bracket from TOOLS NEEDED: refrigerator housing (Fig. 4 and 5). Set parts aside. • 1
ページ10に含まれる内容の要旨
REPLACE REFRIGERATOR DOOR • Set door onto Bottom Hinge Pin. Place Upper Hinge's Pin in the top of freezer door and line up the Upper Hinge with holes in top of • Place Hinge Pin of Middle Hinge Bracket inside refrigerator. Use the 3 bolts to replace Hinge (Fig. 10). Hinge Pin Insert on top of door (Fig. 7). Hold door in place and line up the Middle Hinge Bracket with the holes in refrigerator housing. Fig. 10 • Carefully force-fit Top Hinge Cover back into place over Hinge (Fig.11 ). I Fig. 11 U
ページ11に含まれる内容の要旨
REVERSE FREEZER DOOR • Move the Hinge Pin insert Bracket to the other side ° Gently pry off the Top Hinge Cover with a flat head of the door, keeping the same orientation, and move screwdriver and remove (see Fig.13). the Hinge Pin insert into the hole on the left side of the bracket (Fig. 17). Fig. 13 Fig. 17 i_ Hinge Pin tnsert Hinge Pin insert Bracket Using 10mm or 13/32-inch socket wrench, remove the 3 bolts and lift off the Top Hinge (see Fig. 14). Set parts aside. Reverse Door Closer/Stop
ページ12に含まれる内容の要旨
REVERSE ANDREATTACH REFRIGERATOR DOOR REMOVE base grill. • Using a 1A-inch socket wrench, loosen and remove ° See BASE GRILL INSTRUCTIONS on page 8. Hinge Pin from the Middle Hinge Pin Bracket. Remove washer underneath the middle hinge and • Remove the washer from the Bottom Hinge set aside Pin (Fig. 22). NOTE: At this point the door will be loose, lift up o Using a 1A-inch socket wrench, loosen and remove door slightly and remove it. (Fig. 20 and 20a). the Hinge Pin from the Bottom Hinge. Reatt
ページ13に含まれる内容の要旨
• Take out the Hinge Pin Insert and move • Atthispoint,remove theDecorative Boltonbottom on the Bracket to the other side of the door, refrigerator housing fromtheleftsideof refrigerator keeping the same orientation (Fig. 28). (Fig.24).YouwillneedthisholefortheBottom Hinge. • Place Hinge Pin Insert into the left side of the bracket. Tighten Hinge Pin Bracket Fig. 24 to door (Fig. 28). Fig. 28 Hinge Pin Bracket • Move the Bottom Hinge to the left side of housing keeping the same orientation, and
ページ14に含まれる内容の要旨
Remove theouterlower Decorative Screw fromhousing Place UpperHinge's Pininthetopoffreezer door atareabetween freezer andrefrigerator doors(Fig.31). andlineuptheUpper Hinge withholesintopof Youwillneed thisholefortheMiddle Hinge Bracket). refrigerator. Use the 3 bolts to replace Hinge (Fig. 35). Fig. 35 Fig.31¢}...._ _:_; © • Following illustration, flip the Middle Hinge Bracket (Flange will now be on top) and position on left side of refrigerator • Tighten bolts. Force-fit Top Hinge Cover and re
ページ15に含まれる内容の要旨
DOOR ALIGNMENT LEVELING AND DOOR CLOSING If the space between your doors is uneven, follow the To avoid vibration, the unit must be leveled, if necessary, instructions below to align the doors: adjust the Leveling Legs to compensate for unevenness of the floor. The front should be slightly higher than the 1. Gently pry off the Top Hinge Cover with a flat head rear to aid in door closing. screwdriver and remove. Loosen the Top Hinge Bolts using a 10mm or 13/32-in. socket wrench or Your refrigerat
ページ16に含まれる内容の要旨
ENSURING PROPER AiR CiRCULATiON NEXT In order to ensure proper temperatures, air must flow 1. Clean your refrigerator thoroughly and wipe off all dust between the refrigerator and freezer sections. As shown accumulated during shipping. in the illustration below, cool air enters through the bottom of the freezer section and moves up. Most of the air then 2. Install accessories such as ice cube bin, drawers, flows through the freezer section vents and recirculates shelves, etc., in their proper pl
ページ17に含まれる内容の要旨
ADJUSTING CONTROL SETTINGS FOOD STORAGE GUIDE Give the refrigerator time to cool down completely before Wrap or store food in the refrigerator in airtight and making final adjustments. It is best to wait 24 hours moisture-proof material unless otherwise noted. This before doing this. The recommended settings mentioned in prevents food odor and taste transfer throughout the SETTING THE CONTROLS section should be correct for refrigerator. For dated products, check date code to ensure freshness. no
ページ18に含まれる内容の要旨
STORING FROZEN FOOD Freezing Your freezer will not quick-freeze any large quantity of NOTE: For further information about preparing food for food. Do not put more unfrozen food into the freezer than freezing or food storage times, check a freezer guide or a will freeze within 24 hours (no more than 2 to 3 Ibs of food reliable cookbook. per cubic foot of freezer space). Leave enough space in the freezer for air to circulate around packages. Be careful to leave enough room at the front so the door
ページ19に含まれる内容の要旨
REFRIGERATOR SHELVES NOTE: Make sure that shelves are level from one side to The shelves in your refrigerator are adjustable to meet the other. Failure to do so may result in the shelf falling or your individual storage needs. All the shelves in this unit spilling food. are glass. Storing similar food items together in your refrigerator and Slide Out Shelves (On Some Models) adjusting the shelves to fit different heights of items will You can slide some glass shelves in and out of your make find
ページ20に含まれる内容の要旨
CRISPER AND CRISPER COVER CRISPER HUMiDiTY CONTROL To remove the crisper: You can control the amount of humidity in the moisture- sealed crispers. Adjust the control to any setting between 1. Pull crisper drawer out to drawer stop. _Z_ and <_. 2. Lift the drawer up and toward you to pull out and remove. •%:_ilets moist air out of the crisper for best storage of fruits. 3. To replace crisper, slide back in fully past the drawer stop. •<_keeps moist air in the crisper for best storage of fresh, le
