ページ1に含まれる内容の要旨
ARCTIS
Electronic Freezer no_frost
Operating Instructions
818 35 94-01/2
ページ2に含まれる内容の要旨
Dear customer, Before placing your new freezer into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. Notes which are important for your safety or for the proper 1 functioning of the appliance are stressed with a warning triangle and/ or with signal words (Warning!, Ca
ページ3に含まれる内容の要旨
Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Environmental Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Appliance Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Packaging . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
Contents Control and Information Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 "Open Door" Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Temperature Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Temperature memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Function Errors . . . . . . . . . . . . . . . . . . . . . . . . .
ページ5に含まれる内容の要旨
1 Important Safety Instructions These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appli- ance. Your safety is of paramount importance. If you are unsure about any of the meanings of these warnings contact the Customer Care Department. Prior to Installation • Check the freezer for transport damage. Under no circumstances should a damaged appliance be installed! In the event of damage, please contact your retailer.
ページ6に含まれる内容の要旨
Important Safety Instructions If the refrigerant circuit should become damaged: – avoid open flames and sources of ignition; – thoroughly ventilate the room in which the appliance is situated. Child Safety Do not allow children to tamper with the controls or play with the product. Keep packaging material away from children! (There is a risk of suffo- cation!) During Use This appliance is designed for domestic use only, specifically for the storage of edible foodstuffs only. It is not
ページ7に含まれる内容の要旨
Environmental Information 2 Packaging material The packaging materials are environmentally friendly and can be recy- cled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at your local waste disposal facilities. 2 Old appliance The symbol W on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collect
ページ8に含まれる内容の要旨
Before Use Packaging 0 1. Remove all adhesive tape and packaging from the interior of the appli- ance. Any remnants of adhesive can be removed with white spirit. 3 2. Remove the transport protection pieces and pull off the adhesive tape. 3. Wash the inside of the appliance with lukewarm water with a little bicarbonate of soda added (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger. Dry the appliance thoroughly. Fitting the Door Handle Caution! Do not overti
ページ9に含まれる内容の要旨
Installation Installation Location The appliance should be installed in a well ventilated, dry room. Energy use and efficient performance of the appliance is affected by the ambient temperature. The appliance should therefore – not be exposed to direct sunlight; – not be installed next to radiators, cookers or other sources of heat; – only be installed at a location whose ambient temperature corresponds to the climate classification, for which the appliance is designed. The climate classifica
ページ10に含まれる内容の要旨
Installation Remove the two wall spacers from the appliance accessories pack and, in accordance with the illustrations, fix them at the top of the rear of the appliance so that the distance from the wall required for the necessary ventilation is ensured. Appliance Alignment 0 1. The appliance must be level. Please compensate for unevenness in the floor by turning the two adjustable feet at the front. Electrical Connection Any electrical work required to install this appliance should be
ページ11に含まれる内容の要旨
1. The wire coloured green and yellow must be connected to the ter- minal marked with the letter “E“ or by the earth symbol or col- oured green and yellow. 2. The wire coloured blue must be connected to the terminal “N“ or coloured black. 3. The wire coloured brown must be connected to the terminal marked “L“ or coloured red. 4. Upon completion there must be not cut, or stray strands of wire present and the cord clamp must be secure over the outer sheat. Warning! A cut-off plug inserted into
ページ12に含まれる内容の要旨
Reversing the door 3. Remove the door fitting from the door hinge bracket (1, 2). Move 1 the hinge bracket pivot from the right to the left hand hole (3). Place the door fitting supplied on the hinge bracket pivot (4, 5). 5 4 2 3 4. Unscrew Phillips screw from the door bottom right and remove door fitting (1). Insert door fitting supplied in the door bottom left and fasten with Phillips screw (2). Carefully remove the door to the front and place on one side. 5. Move the upper hinge br
ページ13に含まれる内容の要旨
Reversing the door 7. Place the lower door hinge bracket with the hinge bracket pivot in the lower left of the door and fasten. 8. Unscrew the top handle bracket from the handle rod (1). Unscrew the bottom handle bracket from the door (2). 9. Unscrew the top handle bracket from the door (3) and screw onto the bottom right-hand side of the door (4). Caution! Do not overtighten the 1 screws (max. 2 Nm) as you may damage the door handle. 10. Turn the handle bracket with the handle rod
ページ14に含まれる内容の要旨
The no-frost (frost free) system The appliance can be used as a freezing unit or as a refrigerator depen- ding on requirement. For this purpose, the operation mode "Freezing" or the operation mode "Cooling" can be selected on the appliance. –In the operation mode "Freezing", the appliance is usable for freezing and deep-temperature storage with temperatures from -15 °C up to -24 °C. –In the operation mode "Cooling", this appliance can be operated as a "long fresh" cooling unit with tempera
ページ15に含まれる内容の要旨
Description of the appliance View of the appliance (various models) á Control panel à Interior Illumination â Compartments with lids and drawers ä Maxi-Box ã Drawer (for frozen food storage only) Cold accumulation block There is one cold accumulation block in the freezer. Refer to the section “Prior to Initial Start–Up” concerning freezing of the cold accumulation block. In the event of a power failure or malfunction, the cold accumulation 3 block will increase the hold over period by sever
ページ16に含まれる内容の要旨
Description of the appliance Control Panel 1 ON/OFF button and ON/OFF indicator light (green) 2 Temperature display 3 Temperature setting buttons 4 TURBO/FROSTMATIC button and TURBO/FROSTMATIC indicator light (yellow) 5 ALARM OFF button and warning indicator light (red) (see section: "Control and Information Systems") Temperature setting buttons The temperature is adjusted using the „+“ (WARMER) and „-“ (COLDER) buttons. These buttons are connected to the temperature display. The temperat
ページ17に含まれる内容の要旨
Description of the appliance Temperature display The temperature display shows several types of information. In normal operation the current freezer compartment temperature is displayed (ACTUAL temperature). During temperature adjustment, a blinking display of the temperature selected at the moment occurs (DESIRED temperature). In the TURBO/FROSTMATIC function of the cooling mode "IC" for intensive cooling appears in the display . The current freezer temperature appears in the displa
ページ18に含まれる内容の要旨
Description of the appliance TURBO/FROSTMATIC-button The TURBO/FROSTMATIC function in the freezing mode provides for quick freezing of fresh food products, and at the same time protects previously stored goods against undesired warming in the freezer compartment. In the cooling mode the TURBO/FROSTMATIC function is suitable for fast cooling larger quantities of foodstuff, e.g. drinks or salads during a party. Thereby a DESIRED temperature of +2 °C is automatically preset. 0 1. The TURBO/FR
ページ19に含まれる内容の要旨
Prior to Initial Start–Up Before connecting the appliance to the mains and putting it into oper- 1 ation for the first time, leave the appliance to stand for 30 minutes if was transported upright. After transport on its side, the appliance must be left to stand for 2 hours before putting it into operation. This is nec- essary to allow the refrigerant to flow back into the compressor. Other- wise the compressor may be damaged. 0 1. Please clean the appliance interior and all accessories prior
ページ20に含まれる内容の要旨
Select "Freezing" or "Cooling" If necessary, switch over the appliance with the following steps between the operating modes "Freezing" and "Cooling": 0 1. Hold down the ALARM OFF button and the „-“ (COLDER) button simul- taneously for 5 seconds. When the setting is switched from “Freezing” to “Cooling” “FC” (Freezing -> Cooling) appears in the temperature display, an acoustic signal confirms the change and the temperature display changes to flashing figures (DESIRED temperature cooling mo
