ページ1に含まれる内容の要旨
SMART Board™ 400iv
Interactive Whiteboard System
Configuration and User’s Guide
ページ2に含まれる内容の要旨
Trademark Notice SMART Board, DViT, smarttech, the SMART logo and all SMART taglines are trademarks or registered trademarks of SMART Technologies ULC in the U.S. and or/other countries. Texas Instruments, Brilliant Color, DLP and DLP Link are Trademarks of Texas Instruments. Microsoft, Windows and Internet Explorer are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. Blu-ray is a trademark of the Blu-ray Disc Association. Copyright Not
ページ3に含まれる内容の要旨
Important information Before you install and use your SMART Board™ 480iv interactive whiteboard system, read and understand the safety warnings and precautions in this user’s guide and the included warnings document. These safety warnings and precautions describe the safe and correct operation of your interactive whiteboard system and its accessories, helping you to prevent injuries and equipment damage. Ensure that your interactive whiteboard system is always being used correctly. In this docum
ページ4に含まれる内容の要旨
I M P O R T A N T I N F O R M A T I O N l Do not leave cables on the floor where they can be a tripping hazard. If you must run a cable over the floor, lay it in a flat, straight line and secure it to the floor with tape or a cable management strip of a contrasting color. Handle cables carefully and avoid excessive bending. l Do not climb (or allow children to climb) on a wall- or stand-mounted SMART Board interactive whiteboard. Do not climb on, hang from or suspend objects from the projector b
ページ5に含まれる内容の要旨
I M P O R T A N T I N F O R M A T I O N l Do not block the projector’s ventilation slots and openings. l Avoid putting the projector into Standby mode during the lamp ignition phase because this can lead to premature lamp failure. Keep the projector lamp on for a minimum of 15 minutes before putting it into Standby mode to preserve the lamp life. l In a high altitude location over 1800 m (6000'), where the air is thin and cooling efficiency is reduced, use the projector with the fan mode set to
ページ6に含まれる内容の要旨
I M P O R T A N T I N F O R M A T I O N l Using your SMART product near a TV or radio could cause interference to the images or sound. If this happens, move the TV or radio away from the projector. l If you have peripheral devices that do not use a 4-pin mini-DIN connector or an RCA composite video jack, or if your device has an audio connection that does not use RCA jacks, you may need to purchase third-party adapters. l Keep your remote control in a safe place because there is no other way to
ページ7に含まれる内容の要旨
I M P O R T A N T I N F O R M A T I O N Environmental requirements Before installing your SMART Board 480iv interactive whiteboard system, review the following environmental requirements. Environmental Parameter requirement l Operating temperature 5°C to 35°C (41°F to 95°F) from 0 m to 1800 m (0' to 6000') l 5°C to 30°C (41°F to 86°F) from 1800 m to 3000 m (6000' to 9800') l Storage temperature -20°C to 50°C (-4°F to 122°F) l Humidity 30% to 80% relative humidity, non-condensing l Water and flui
ページ8に含まれる内容の要旨
ページ9に含まれる内容の要旨
Contents Important information i Safety warnings, cautions and important information i Environmental requirements v About your interactive whiteboard system 1 SMART Board 480iv interactive whiteboard system features 2 Included accessories 4 Optional accessories 4 Installing your interactive whiteboard system 5 Choosing a location 6 Choosing a height 6 Routing the cables 7 Installing SMART software 8 Securing the interactive whiteboard system 8 Using your interactive whiteboard system 9 Using you
ページ10に含まれる内容の要旨
C O N T E N T S Remotely managing your interactive whiteboard system 49 Web page management 50 Connecting your room control system to the SMART V25 projector 54 Projector programming commands 56 Simple Network Management Protocol (SNMP) 67 Hardware environmental compliance 69 Waste Electrical and Electronic Equipment regulations (WEEE directive) 69 Restriction of Certain Hazardous Substances (RoHS directive) 69 Batteries 69 Packaging 70 China’s Electronic Information Products regulations 70 U.S.
ページ11に含まれる内容の要旨
Chapter 1 About your interactive whiteboard system SMART Board 480iv interactive whiteboard system features 2 SMART Board 480 interactive whiteboard 2 SMART V25 projector 3 Included accessories 4 Pen 4 Remote control 4 Optional accessories 4 Your SMART Board 480iv interactive whiteboard system combines the wall-mounted, short-throw SMART V25 projector with a SMART Board 480 interactive whiteboard. This chapter describes the features of your SMART Board 480iv interactive whiteboard system and pro
ページ12に含まれる内容の要旨
C H A P T E R 1 About your interactive whiteboard system SMART Board 480iv interactive whiteboard system features Your SMART Board 480iv interactive whiteboard system consists of the SMART Board 480 interactive whiteboard and the SMART V25 projector system. When the SMART V25 projector displays an image from your computer on the touch-sensitive interactive whiteboard, you can do everything that you can do at your computer—open and close applications, scroll through files, meet with others, creat
ページ13に含まれる内容の要旨
C H A P T E R 1 About your interactive whiteboard system SMART V25 projector The SMART V25 projector system includes a projector for use with SMART Board 480 interactive whiteboards and a sturdy support system for many different environments. The features of the projector system include: l A wall-mounted projector engine that uses DLP® technology by Texas Instruments™, providing BrilliantColor™ performance and Gamma 2.2 correction with SMART Presentation, Bright Room, Dark Room, sRGB and User mo
ページ14に含まれる内容の要旨
C H A P T E R 1 About your interactive whiteboard system Included accessories The following accessories are included with your SMART Board 480iv interactive whiteboard system. Pen There is one pen included with your interactive whiteboard. Remote control The remote control enables you to control the system and set up your SMART V25 projector. Use the remote control to access menu options, system information and input selection options. Optional accessories You can add a variety of optional acces
ページ15に含まれる内容の要旨
Chapter 2 Installing your interactive whiteboard system Choosing a location 6 Choosing a height 6 Routing the cables 7 Installing SMART software 8 Securing the interactive whiteboard system 8 Securing the projector to the boom 8 Consult the included SMART Board 480iv interactive whiteboard system installation document for instructions on how to install your product and use the mounting template. I I M P OR T A N T Use the instructions included with your SMART V25 projector to install your inte
ページ16に含まれる内容の要旨
C H A P T E R 2 Installing your interactive whiteboard system Choosing a location Choose a location for your SMART Board 480iv interactive whiteboard system that’s far from bright light sources, such as windows or strong overhead lighting. Bright light sources can cause distracting shadows on your interactive whiteboard and can reduce the contrast of the projected image. Select a wall with a flat, regular surface and sufficient clearance to accommodate your interactive whiteboard system. Install
ページ17に含まれる内容の要旨
C H A P T E R 2 Installing your interactive whiteboard system Routing the cables When connecting cables from a SMART V25 projector to your computer, make sure that all cables pass along the top of the interactive whiteboard wall-mounting bracket and then down the side of the interactive whiteboard. N N OT E Don’t connect the power cable to a power outlet until you connect all the cables to the projector. 7
ページ18に含まれる内容の要旨
C H A P T E R 2 Installing your interactive whiteboard system Installing SMART software You must install SMART software on the computer connected to your interactive whiteboard system to access all of its features. Download SMART software from smarttech.com/software. These pages list the minimum hardware requirements for each software version. If SMART software is already installed on your computer, take this opportunity to upgrade your software to ensure compatibility. Securing the interactive
ページ19に含まれる内容の要旨
Chapter 3 Using your interactive whiteboard system Using your projector 9 Using your remote control 9 Installing the remote control battery 9 Using the remote control buttons 11 Adjusting projector settings 11 Focusing the image 17 Adjusting the image 18 SMART V25 projector connection diagram 18 Using your interactive whiteboard 20 This chapter describes the basic operation of your interactive whiteboard system, and also explains how to set up your remote control, retrieve system information, ac
ページ20に含まれる内容の要旨
C H A P T E R 3 Using your interactive whiteboard system W W A R N I N G l Reduce the risk associated with a leaking battery in the projector’s remote control by following these practices: o Use only the specified type of coin-cell battery. o Orient the battery’s positive (+) and negative (–) terminals according to the markings on the remote control. o Remove the battery when the remote control is unused for an extended period. o Do not heat, disassemble, short or recharge the battery, or expo
