ページ1に含まれる内容の要旨
QUICK REFERENCE GUIDE
®
Mitel 5610 IP DECT Cordless Handset
Turn Handset On or Off Signal Range
Press and hold key. The cordless handset has an indoor
The Mitel 5610 Cordless Handset and IP DECT (Digital Enhanced Cordless
signal range of up to 150 feet (50
Telecommunications) Stand provides Mitel 5000 SIP call processing features on a
meters) from the IP DECT stand. This
cordless handset. The IP DECT stand also provides conferencing, call transfer, and
range can be limited by concrete
ページ2に含まれる内容の要旨
QUICK REFERENCE GUIDE Handset Display - Idle Mode Handset Display Main Menu Enter Main Menu Add a Contact From Idle mode, press . 1. From Idle mode, press . 2. Select CONTACTS. Select a Menu Option 3. Press OPTIONS, and then select 1. Press the keys to ADD CONTACT. select a menu option. 4. Press EDIT. 2. Press . 5. Enter contact using the 3. Press BACK to exit a menu. keypad as a text editor. Press to switch Adjust Volume between uppercase letters, lowercase letters, and During a ca
ページ3に含まれる内容の要旨
QUICK REFERENCE GUIDE Call Swap Listen to Voice Mail Message Call swap lets you alternate between two calls. Each call is private; neither person If a message is left in your voice mailbox, MISSED CALL and then NEW can overhear your conversation with the other. VOICEMAIL appears in the handset display. A small envelope icon is displayed at the top of the main display. 1. While on a call, press HOLD. 1. Press to enter main menu. 2. Enter the number of the second party that you want to call an
ページ4に含まれる内容の要旨
QUICK REFERENCE GUIDE Check Call Log Remove Belt Clip Cover 1. From idle mode, press CALL LOG. Use the belt clip removal tool. Insert the tool between the belt clip cover and the phone.Then, using your thumb, press down and slide the clip up and off the back of 2. Select the type of calls: Missed, Incoming, Outgoing, or All Calls. the phone. 3. Select the call. 4. Press . About Feature Access Codes You can dial feature access codes for Emergency Calls (911 U.S. or 999/112 Europe) and Outgoin
ページ5に含まれる内容の要旨
QUICK REFERENCE GUIDE Troubleshooting Symptom Possible Cause Corrective Action Unable to remove belt You are not inserting the removal Insert the removal tool as shown clip cover using removal tool far enough into the opening in the graphic on the previous tool. between the handset and clip page. cover. Handset display is Handset is in power saving Press any key. black. mode. Battery is drained. Put handset in charging cradle to recharge battery. Handset does not Power to handset charging En