ページ1に含まれる内容の要旨
R
M
P
N
X
D
M
G
E
C
Q
J
F
K
H
J-5H51
94.62"
45.06"
88.09"
Description Assembly Letter Quantity Required Tools
Floor J-5H51 1
Left Side Panel C 1
1S85
Right Side Panel D 1
Safety Glasses
Left Back Panel E 1
Right Door Panel F 1
RUBBERMAID
Right Back Panel G 1
Left Front Panel H 1
7' x 3'6" RESIN STORAGE BUILDING
Rubber Mallet
Right Front Panel J 1
Left Door Panel K 1
ASSEMBLY INSTRUCTIONS
Gable M 2
Pre-Assembly:
Left Roof Panel N 1
Phillips Screw Driver
Right
ページ2に含まれる内容の要旨
Level construcion site before beginning assembly of shed. A foundation OPTIONAL STEP: may be constructed if desired. If desired, recessed anchor locations (4 places) can be used to anchor the shed floor to a foundation. 1 1 1 4 /8" 4 /8" 76" 3 3 /4" 3 3 /4" 1 7 32 /8" 43 /16" 1 1 7 /2" 7 /2" 1 1 4 /8" 4 /8" 84" 7 43 /16" 84" Using a utility knife, cut the long sides of each wall slot tab and then use a screwdriver to knock it out 14 places on Floor (J-5H51). Open hinge holes 2 places. 2 J-5H51
ページ3に含まれる内容の要旨
22222 2 2 2 2 2 Using a srewdriver, punch out the screw holes on the top of Left Side Lubricate dovetails on Left Front Panel (H) 4 places with liquid soap. Panel (C) 2 Places. Connect Left Front Panel (H) into dovetails of Left Side Panel (C), engage Connect Left Side Panel (C) into Floor (J-5H51). snaps on bottom of Left Front Panel (H) into Floor (J-5H51). 3 4 C Screw Holes C click J-5H51 C H click J-5H51 J-5H51 click Lubricate dovetails on Left Back Panel (E) 4 places with liquid soap. Repe
ページ4に含まれる内容の要旨
1 1 1 1 1 1 1 1 1 1 3 3 3 3 3 2 2 2 2 2 Repeat Steps 3–5 to assemble right side of shed. Install Gable (M) onto top of back wall engaging the 2 dovetails and snaps on the back panel and the dovetail on the side panel on both the left and Continue to Step 7. right sides of the shed. 7 8 E G Q G E Install Gable (M) onto top of front wall engaging the 2 dovetails on Install Left Door Panel (K) inserting the lower hinge pin into Left the front panel and the dovetail on the side panel on both the
ページ5に含まれる内容の要旨
2 2 2 2 2 3 3 3 3 3 Install Right Door Panel (F) inserting the lower hinge pin into Right Floor Place Ridge Beam (R) into cups at the top of each Gable (M). (U) socket, lift the right end of the Gable (M) enough to insert the top hinge pin on Right Door Panel (F) into the Gable (M) socket. 11 12 Install Lock Hasp (X) into back side of Right Door Panel (F). Engage Gable (M) snaps on front wall. R 4 4 4 4 4 M R M M F 1 1 1 1 1 X Align slots in Ridge Beam (R) with holes in Gable (M) tabs, install
ページ6に含まれる内容の要旨
11111 33333 Lubricate roof snaps on Gable (M) 8 places on each Gable (M). Raise the Left Roof Panel (N) onto the left side of the shed assembly, the arrows on the roof panel should face the inside of the shed and point towards the Ridge Beam (R). 15 M M N Using (2) step stools (1 inside shed, 1 outside shed), lift the bottom of the roof panel above horizontal, guide the roof panel into the Ridge Beam (R), align both Gable (M) ribs with the channels in Left Roof Panel (N), engage Left Roof Panel
ページ7に含まれる内容の要旨
2 2 2 2 2 Engage all snaps between the roof panel and gable, then roof panel and Repeat Steps 15–17 for right roof of shed. wall panel. 1 17 6 18 P N R See Steps 15–17 P Back of shed shown Install Screws (AA) 16 places in Gable (M). While one person holds down the bottom of the roof, install screws (AA) 4 places in screw holes on the top of the Side Panels (C&D). Screws connect the Side Panels to the Roof Panels. 20 19 (16) (4) AA AA Caution: When installing screws do not overtighten. Caution
ページ8に含まれる内容の要旨
Install Roof Pins (EE) 4 places connecting the Roof Panels to the Gables. 21 (4) EE OPTIONAL STEP: If desired, add wood to create a loft (wood not included). .75" x 24" x 37.5" .75" x 37.25" x 37.5" .75" x 24" x 37.5"
ページ9に含まれる内容の要旨
94.62" 45.06" 88.09" Printed in U.S.A. Customer Service © 2012 Rubbermaid Incorporated Toll Free: 1-888-895-2110 Huntersville, NC U.S.A. 28078-1801 www.rubbermaid.com M–F 8:30 AM to 5:00 PM EST or visit us at www.rubbermaid.com 1869757
