ページ1に含まれる内容の要旨
DO NOT
DISCARD
Para obtener un ejemplar en Español de este Pour demander un exemplaire en français de ce Manuel
Manual del propietario, visite www.heatnglo.com. du propriétaire, visitez www.heatnglo.com.
Owner’s Manual
Installation and Operation
Models:
ST-36TRB-IPI
PIER-36TRB-IPI
LCOR-36TRB-IPI
RCOR-36TRB-IPI
NOTICE
DO NOT DISCARD THIS MANUAL
• Important operating • Read, understand and follow • Leave this manual with
and maintenance these instructions for safe
party responsible for use
ins
ページ2に含まれる内容の要旨
Read this manual before installing or operating this appliance. Please retain this owner’s manual for future reference. This owner’s manual should be retained for future A. Congratulations reference. We suggest that you keep it with your other Congratulations on selecting a Heat & Glo gas fi replace, an important documents and product manuals. elegant and clean alternative to wood burning fi replaces. The information contained in this owner’s manual, unless The Heat & Glo gas fi replace you h
ページ3に含まれる内容の要旨
Safety Alert Key: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury. • WARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury. • CAUTION! Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. • NOTICE: Used to address practices not related to personal injury. Table of Contents A. Congratulations . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
13 Finishing A. Splatter Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 B. Mantel and Wall Projections . . . . . . . . . . . . . . . . . . . . . . . 56 C. Facing Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 D. Finishing Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 E. Elevated Hearth Systems . . . . . . . . . . . . . . . . . . . . . . . . . 59 14 Appliance Setup A. Remove Fixed Glass Assembly . . . . . .
ページ5に含まれる内容の要旨
B. Limited Lifetime Warranty Hearth & Home Technologies Inc. LIMITED LIFETIME WARRANTY Hearth & Home Technologies Inc., on behalf of its hearth brands (”HHT”), extends the following warranty for HHT gas, wood, pellet, coal and electric hearth appliances that are purchased from an HHT authorized dealer. WARRANTY COVERAGE: HHT warrants to the original owner of the HHT appliance at the site of installation, and to any transferee taking ownership of the appliance at the site of installation with
ページ6に含まれる内容の要旨
B. Limited Lifetime Warranty (continued) WARRANTY CONDITIONS: WARRANTY EXCLUSIONS: - - - - - This warranty is void if: LIMITATIONS OF LIABILITY: 4021-645C 12-29-10 Page 2 of 2 6 Heat & Glo • ST-36TRB-IPI, PIER-36TRB-IPI, LCOR-36TRB-IPI, RCOR-36TRB-IPI • 2128-900 Rev. H • 8/11
ページ7に含まれる内容の要旨
Listing and Code Approvals 1 1 A. Appliance Certifi cation C. BTU Specifi cations Maximum Minimum Orifi ce MODELS: ST-36TRB-IPI, PIER-36TRB-IPI, LCOR-36TRB-IPI, Models Input Input Size RCOR-36TRB-IPI (U.S. or Canada) BTU/h BTU/h (DMS) LABORATORY: Underwriters Laboratories, Inc. (UL) US ST-36TRB-IPI 37,000 26,000 32 (0-2000 FT) PIER-36TRB-IPI TYPE: Direct Vent Gas Appliance Heater LCOR-36TRB-IPI CANADA 34,500 23,900 33 RCOR-36TRB-IPI (2000-4500 FT) STANDARD: ANSI Z21.88-2007 • CSA 2.33a-2007 D.
ページ8に含まれる内容の要旨
Inspection Note: The following requirements reference various The state or local gas inspector of the side wall horizon- Massachusetts and national codes not contained in this tally vented gas fueled equipment shall not approve the document. installation unless, upon inspection, the inspector ob- serves carbon monoxide detectors and signage installed H. Requirements for the Commonwealth of in accordance with the provisions of 248 CMR 5.08(2)(a)1 Massachusetts through 4. For all side wall
ページ9に含まれる内容の要旨
User Guide Operating Instructions 2 2 • Keep remote controls out of reach of children. A. Gas Fireplace Safety • Never leave children alone near a hot fi replace, whether operating or cooling down. WARNING • Teach children to NEVER touch the fi replace. HOT SURFACES! Glass and other surfaces are hot during • Consider not using the fi replace when children will be operation AND cool down. present. Hot glass will cause burns. Contact your dealer for more information, or visit: www. • DO NOT t
ページ10に含まれる内容の要旨
CLEAR SPACE 3 FT. IN FRONT OF FIREPLACE C. Blower Kit (optional) If desired, a blower kit may be added. Contact your deal- er to order the correct fan kit. Blower Installation 1. Install and wire the blower in appliance as shown in Figure 2.2. 2. Wire the blower temperature sensor and adjustable speed control (rheostat) according to the instructions provided with the fan. 3. If rheostat is required, bend rheostat attachment tab located in bottom of fi replace upward as shown in Figure 2.3
ページ11に含まれる内容の要旨
I. Lighting Instructions (IPI) The IPI system may be operated with two D-cell batteries. When using batteries, unplug the transformer. To prolong battery life, remove them when using the transformer. FOR YOUR SAFETY LIGHTING READ BEFORE LIGHTING INSTRUCTIONS (IPI) WARNING: If you do not follow these instructions exactly, a fi re or explosion 1. This appliance is equipped with an ignition may result causing property damage, personal injury or loss of life. device which automatically lights the
ページ12に含まれる内容の要旨
J. After Fireplace is Lit Initial Break-in Procedure • The fireplace should be run three to four hours continuously on high. • Turn the fi replace off and allow it to completely cool. • Remove fi xed glass assembly. See Section 14.G. • Clean fi xed glass assembly. See Section 3. • Replace the fi xed glass assembly and run continuously on high an additional 12 hours. This cures the materials used to manufacture the fi re- place. NOTICE! Open windows for air circulation during fi re- place break-in. •
ページ13に含まれる内容の要旨
Maintenance and Service 3 3 Doors, Surrounds, Fronts Any safety screen or guard removed for servicing must be replaced prior to operating the fi replace. Frequency: Annually By: Homeowner When properly maintained, your fi replace will give you many years of trouble-free service. We recommend an- Tools needed: Protective gloves, stable work surface nual service by a qualifi ed service technician. • Assess condition of screen and replace as necessary. A. Maintenance Tasks-Homeowner • Ins
ページ14に含まれる内容の要旨
Venting Logs Frequency: Seasonally Frequency: Annually By: Homeowner By: Qualifi ed Service Technician Tools needed: Protective gloves and safety glasses. Tools needed: Protective gloves. • Inspect venting and termination cap for blockage or • Inspect for damaged or missing logs. Replace as necessary. obstruction such plants, bird nests, leaves, snow, debris, Refer to Section 14 for log placement instructions. etc. • Verify correct log placement and no fl ame impingement • Verify terminatio
ページ15に含まれる内容の要旨
Burner Ignition and Operation Frequency: Annually By: Qualifi ed Service Technician Tools needed: Protective gloves, vacuum cleaner, whisk broom, fl ashlight, voltmeter, indexed drill bit set, and a manometer. • Verify burner is properly secured and aligned with pilot or igniter. • Clean off burner top, inspect for plugged ports, corrosion or deterioration. Replace burner if necessary. • Replace ember materials with new dime-size pieces. DO NOT block ports or obstruct lighting paths. Refer
ページ16に含まれる内容の要旨
Installer Guide Getting Started 4 4 A. Typical Appliance System NOTICE: Illustrations and photos refl ect typical installations and are for design purposes only. Illustrations/diagrams are not drawn to scale. Actual product may vary from pictures in manual HORIZONTAL NON-COMBUSTIBLE ROOF FLASHING TERMINATION CAP MAINTAINS MINIMUM CLEARANCE (SECTION 10.M) AROUND PIPE (SECTION 10.D) VERTICAL TERMINATION CAP (SECTION 10.E) STORM COLLAR (SECTION 10.H) VENT PIPE PENETRATES ROOF PREFERABLY W
ページ17に含まれる内容の要旨
B. Design and Installation Considerations D. Inspect Appliance and Components Heat & Glo direct vent gas appliances are designed to • Carefully remove the appliance and components from operate with all combustion air siphoned from outside of the packaging. the building and all exhaust gases expelled to the outside. • The vent system components and decorative doors and No additional outside air source is required. fronts may be shipped in separate packages. Installation MUST comply with loca
ページ18に含まれる内容の要旨
Framing and Clearances 5 5 NOTICE: Illustrations refl ect typical installations and are A. Selecting Appliance Location FOR DESIGN PURPOSES ONLY. Illustrations/diagrams When selecting a location for the appliance it is important to are not drawn to scale. Actual installation may vary due to consider the required clearances to walls (see Figure 5.1). individual design preference. WARNING! Risk of Fire or Burns! Provide adequate clearance around air openings and for service access. Due to
ページ19に含まれる内容の要旨
300ºF continuous exposure rating to seal gaps. Gas line B. Constructing the Appliance Chase holes and other openings should be caulked with caulk A chase is a vertical box-like structure built to enclose the with a minimum of 300ºF continuous exposure rating or gas appliance and/or its vent system. In cooler climates stuffed with unfaced insulation. If the appliance is being the vent should enclosed inside the chase. installed on a cement surface, a layer of plywood may be NOTICE: Treatme
ページ20に含まれる内容の要旨
A E I I H C B G D F AB C D E F G H I DVP Pipe SLP Pipe DVP Pipe* Rough Rough PIER-36TRB-IPI Clearance Combustible Combustible Ends of Sides of Rough Rough Rough Opening Opening to Ceiling Floor Flooring Appliance Appliance Opening Opening Opening (Height) (Width) (Width) (Width) (Depth) Inches 10 8-5/8 38-1/8 23 40 31-5/8 0 0 1/2 36 Millimeters 254 219 968 584 1016 803 0 0 13 914 * Adjust framing dimensions for interior sheathing (such as sheetrock) Figure 5.3 Clearances to Combustibles PIE
