ページ1に含まれる内容の要旨
DO NOT
DISCARD
Owner ’ s Manual
Installation and Operation
Models:
RED60
NOTICE
DO NOT DISCARD THIS MANUAL
• Important operating • Read, understand and follow • Leave this manual with
and maintenance these instructions for safe
party responsible for use
instructions included. installation and operation.
and operation.
W ARNING
W ARNING: I f t h e i n f o r m a t i o n i n t h e s e
HOT SURF ACES!
i n s t r u c t i o n s i s n o t f o l l o w e d e x a c t l y , a fi r e
ページ2に含まれる内容の要旨
Read this manual before installing or operating this appliance. Please retain this owner’s manual for future reference. This owner’s manual should be retained for future A. Congratulations reference. We suggest that you keep it with your other Congratulations on selecting a Heat & Glo gas fireplace, an important documents and product manuals. elegant and clean alternative to wood burning fireplaces. The information contained in this owner’s manual, unless The Heat & Glo gas fireplace you
ページ3に含まれる内容の要旨
Safety Alert Key: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury. • WARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury. • CAUTION! Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. • NOTICE: Used to address practices not related to personal injury. T able of Contents A. Congratulations . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
E. Electrical Service and Repair . . . . . . . . . . . . . . . . . . . . . . 64 F. Junction Box Installation. . . . . . . . . . . . . . . . . . . . . . . . . . 64 G. Active Convection Blower Replacement . . . . . . . . . . . . . 64 13 Finishing A. Splatter Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 B. Framing and Finishing Instructions . . . . . . . . . . . . . . . . . 66 C. Mantel and Wall Projections . . . . . . . . . . . . . . . . . . . . . . . 68 D. Facing
ページ5に含まれる内容の要旨
B. Limited Lifetime W arranty Hearth & Home Technologies Inc. LIMITED LIFETIME WARRANTY Hearth & Home Technologies Inc., on behalf of its hearth brands (”HHT”), extends the following warranty for HHT gas, wood, pellet, coal and electric hearth appliances that are purchased from an HHT authorized dealer. WARRANTY COVERAGE: HHT warrants to the original owner of the HHT appliance at the site of installation, and to any transferee taking ownership of the appliance at the site of installation with
ページ6に含まれる内容の要旨
B. Limited Lifetime W arranty (continued) WARRANTY CONDITIONS: • This warranty only covers HHT appliances that are purchased through an HHT authorized dealer or distributor. A list of HHT authorized dealers is available on the HHT branded websites. • This warranty is only valid while the HHT appliance remains at the site of original installation. • Contact your installing dealer for warranty service. If the installing dealer is unable to provide necessary parts, contact the nearest HHT author
ページ7に含まれる内容の要旨
L i s t i n g a n d C o d e A p p r o v a l s 1 A. Appliance Certification C. BTU Specifications Minimum Orifice Maximum Models MODEL: RED60 Input Size Input BTU/h (U.S. or Canada) BTU/h (DMS) LABORATORY: Underwriters Laboratories, Inc. (UL) US TYPE: V ented Gas Fireplace Heater 44,000 31,000 #30 (0-2000 FT) RED60 STANDARD: A N S I Z 2 1 . 8 8 b - 2 0 0 8 C S A 2 . 3 3 a - 2 0 0 8 (NG) CANADA 39,500 28,000 #32 V e n t e d G a s F i r e p l a c e H e a t e r s (2000-450
ページ8に含まれる内容の要旨
Inspection N o t e : The following requirements reference various The state or local gas inspector of the side wall horizon- Massachusetts and national codes not contained in this tally vented gas fueled equipment shall not approve the document. installation unless, upon inspection, the inspector ob- serves carbon monoxide detectors and signage installed H. Requirements for the Commonwealth of in accordance with the provisions of 248 CMR 5.08(2)(a)1 Massachusetts through 4. For all
ページ9に含まれる内容の要旨
CLEAR SPACE 3 FT. IN FRONT OF FIREPLACE User Guide O p er a t i n g I n s t r u c t i o n s 2 • Install a switch lock or a wall/remote control with child A. Gas Fireplace Safety protection lockout feature. W ARNING • Never leave children alone near a hot fireplace, whether operating or cooling down. HOT SURF ACES! Glass and other surfaces are hot during • Teach children to NEVER touch the fireplace. operation AND cool down. • Consider not using the fireplace when children will be Hot
ページ10に含まれる内容の要旨
5. Module Reset D. Decorative Doors and Fronts This module may lock-out under certain conditions. WARNING! Risk of Fire! Install ONLY doors or fronts When this occurs, the appliance will not ignite or approved by Hearth & Home Technologies. Unapproved respond to commands. The module will go into lock-out doors or fronts may cause fireplace to overheat. mode by emitting three audible beeps, then continuously This appliance has been supplied with an integral displaying a RED/GREEN error
ページ11に含まれる内容の要旨
H. Lighting Instructions (IPI) FOR YOUR S AFETY LIGHTING READ BEFORE LIGHTING INSTRUCTIONS (IPI) W A R N I N G : If you do not follow these instructions exactly, a fire or explosion 1. This appliance is equipped with an ignition may result causing property damage, personal injury or loss of life. device which automatically lights the burner. DO NOT try to light the burner by hand. • Immediately call your gas supplier A. This appliance is equipped with an intermittent pilot ignition (IP
ページ12に含まれる内容の要旨
I. After Fireplace is Lit Initial Break-in Procedure • The fireplace should be run three to four hours continuously on high. • Turn the fireplace off and allow it to completely cool. • Remove fixed glass assembly. See Section 14.H. • Clean fixed glass assembly. See Section 3. • Replace the fixed glass assembly and run continuously on high an additional 12 hours. This cures the materials used to manufacture the fire- place. NOTICE! Open windows for air circulation during fire- place break-in.
ページ13に含まれる内容の要旨
M a i n t e n an c e an d S er v i c e 3 Doors, Surrounds, Fronts Any safety screen or guard removed for servicing must be replaced prior to operating the fireplace. Frequency: Annually By: Homeowner When properly maintained, your fireplace will give you many years of trouble-free service. We recommend an- Tools needed: Protective gloves, stable work surface nual service by a qualified service technician. • Assess condition of screen and replace as necessary. A. Maintenance T asks-
ページ14に含まれる内容の要旨
V enting • Remove all foreign objects. • Verify unobstructed air circulation. Frequency: Seasonally By: Homeowner Burner Ignition and Operation Tools needed: Protective gloves and safety glasses. Frequency: Annually • Inspect venting and termination cap for blockage or By: Qualified Service Technician obstruction such plants, bird nests, leaves, snow, debris, Tools needed: Protective gloves, vacuum cleaner, whisk etc. broom, flashlight, voltmeter, indexed drill bit set, and a • Verify ter
ページ15に含まれる内容の要旨
Installer Guide G e t t i n g S t a r t ed 4 A. T ypical Appliance System NOTICE: Illustrations and photos reflect typical installations and are for design purposes only. Illustrations/diagrams are not drawn to scale. Actual product may vary from pictures in manual HORIZONTAL TERMINATION REFERENCES VERTICAL TERMINATION CAP (SECTION 10.H) WALL PENETRATION FRAMING (SECTION 8.B) HORIZONTAL TERMINATION CAP (SECTION 10.J) NON-COMBUSTIBLE ROOF FLASHING MAINTAINS MINIMUM CLEARANCE AROUND PIP
ページ16に含まれる内容の要旨
B. Design and Installation Considerations D. Inspect Appliance and Components Heat & Glo direct vent gas appliances are designed to • Carefully remove the appliance and components from operate with all combustion air siphoned from outside of the packaging. the building and all exhaust gases expelled to the outside. • The vent system components and decorative doors and No additional outside air source is required. fronts may be shipped in separate packages. Installation MUST comply with l
ページ17に含まれる内容の要旨
F r a m i n g a n d C l e a r an c e s 5 NOTICE: Illustrations reflect typical installations and are A. Selecting Appliance Location FOR DESIGN PURPOSES ONLY. Illustrations/diagrams When selecting a location for the appliance it is important to are not drawn to scale. Actual installation may vary due to consider the required clearances to walls (see Figure 5.1). individual design preference. WARNING! Risk of Fire or Burns! Provide adequate It is important to follow the framing and fin
ページ18に含まれる内容の要旨
stuffed with unfaced insulation. If the appliance is being B. Constructing the Appliance Chase installed on a cement surface, a layer of plywood may be A chase is a vertical box-like structure built to enclose the placed underneath to prevent conducting cold up into the gas appliance and/or its vent system. In cooler climates room. the vent should be enclosed inside the chase. NOTICE: Treatment of ceiling firestops and wall shield C. Clearances firestops and construction of the chase ma
ページ19に含まれる内容の要旨
Note: For non-combustible fireplace finish material (marble, stone, etc) specifications refer to Section 13. Non-Combustible Mantels TO CEILING Note: All measurements in inches. MAX. 16 NAILING TABS BOTH SIDES 10 43 9 MIN. 8 12 7 6 5 6 4 3 5 2 1/2 1 4 MEASUREMENTS FROM TOP EDGE OF THE FIRESCREEN DOOR ASSEMBLY Figure 5.3 Nailing T ab Locations D. Mantel and W all Projections Figure 5.5 Minimum V ertical and Maximum Horizontal Dimensions of Non-Combustibles WARNING! Risk of Fire! Comply
ページ20に含まれる内容の要旨
T er m i n a t i o n L o c at i o n s 6 A. V ent T ermination Minimum Clearances A B 6 in. (minimum) up to 20 in. 18 in. minimum W ARNING 152 mm/508 mm 457 mm 20 in. and over 0 in. minimum Fire Risk. Gas, Wood or Fuel Oil Maintain vent clearance to combustibles as Termination Cap specified. • DO NOT pack air space with insulation or other materials. Failure to keep insulation or other materials away B from vent pipe may cause overheating and fire. A * HORIZONTAL OVERHANG Gas Termination
