FMI Mantel and Base W36TOの取扱説明書

ページ1に含まれる内容の要旨

W36TU and W36TO
Mantel and Base
ASSEMBLY AND INSTALLATION INSTRUCTIONS
Important: Read entire instruction sheet before
WARNING: Follow guidelines of paint or finish
assembling or installing mantel kit.
manufacturer. Use care when finishing or painting an
These mantels are only approved for use with any
unfinished mantel (W36TU only). Do not finish or paint
DESA Heating, LLC 36" electric and gas fireplace sys- mantel pieces near running heater or open flame. These
vapors are highly flammab

ページ2に含まれる内容の要旨

Right Leg ASSEmbLING mANTEL Assembly #2 Important : more than one person is required to lift Left Leg assembled mantel. Lift mantel by leg assemblies. Lifting Assembly #3 by header or mantel top could damage mantel. 1 Use the following illustrations to assemble mantel. Use only 1 / " 4 Screws screws provided. Header #4 Right Leg Assembly #2 Base #1 Left Leg Assembly #3 Flush Figure 2 - Installing mantel Base Header IMPORTANT: Align mantel left to right on base before install- Assembly i

ページ3に含まれる内容の要旨

Gas Fireplace Installation 6. Fireplace with louver door: Lower bottom louver door. 1. Fireplace should be fully assembled. See Assembling Use two screws provided in hardware package and attach Fireplace in fireplace owner’s manual. fireplace to wooden base. Close louver door. 2. Place mantel base close to installation location. See fire- Fireplace with fixed louver: Before installing logs or place owner’s manual for installation clearances. Leave burner assembly (see owner’s manual) remov

ページ4に含まれる内容の要旨

DESA Heating, LLC 2701 Industrial Drive Bowling Green, KY 42101 www.desatech.com 1-866-672-6040 123679-01 123679 01 Rev. B NOT A UPC 07/08