Ingersoll-Rand 66266-XXX-Bの取扱説明書

ページ1に含まれる内容の要旨

OPERATOR’S MANUAL 66266-XXX-B
RELEASED: 1-8-99
INCLUDING: SERVICE KITS, TROUBLESHOOTING, PARTS LIST,
REVISED: 10-18-10
DISASSEMBLY & REASSEMBLY.
(REV. 04)
CHOP-CHECK STYLE
LOWER PUMP ENDS
Also covers 637074-X43-B service kits
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS LOWER PUMP END DESCRIPTION CHART
Use

ページ2に含まれる内容の要旨

PARTS LIST / 66266-XXX-B Item Description (size) (Qty) Part No. [Mtl] Item Description (size) (Qty) Part No. [Mtl] 1 Solvent Cup Assembly (1) 66866-1 [C] 43 Wave Spring (1) 94131 [SH] (not shown, used to adjust item 1) 4Rod (1) 93456-1 [C] 47 Wave Spring (1) 90915 [SH] 51 6 Pump Body (1) 90848 [DI] “V” Packing (66266-343-B, -R43-B) (3) 93661-2 [GFT] (66266-C43-B, -G43-B, -P43-B) 7 Gasket (2) 90306 [Co] (3) 93661-4 [UH] 52 (66266-343-B, -P43-B) 9 Suction Tube (1) 91844 [C] “V” Packing (2) 93

ページ3に含まれる内容の要旨

PARTS LIST / 66266-XXX-B UPPER PACKING 51 52  1 51 52 51 115 53 43 1 - 11-1/2 N.P.T.F. - 1 6 7 26 9 10 MIDDLE PACKING 28  47 57 11 36 55 7 24 56 55 34 25 56  21 54 37 23 65 22 23 15 30 LUBRICATION / SEALANTS Keep solvent cup filled with a lubricant such as Wet Sol "Plus" or equivalent. Apply Loctite® 242® to threads when assembling. 31 32 33 Figure 1 66266-XXX-B (en) Page 3 of 4

ページ4に含まれる内容の要旨

(34) valve rod (beveled end fi rst). help keep it in place. 8. Thread the (34) valve rod to the (26) plunger rod and 15. Assemble the (6) pump body over the (26) plunger rod tighten, using the wrench fl ats provided. and onto the (10) tie rods. Seat the (9) suction tube into 9. Assemble one (23) “O” ring, the (22) seat (large o.d. cham- the (6) pump body. fer facing down) and the other (23) “O” ring into the (15) 16. Assemble the (43) wave spring, (53) male packing pressure chamber body. wash