Bryan Boilers CLM-120-WT-FDG-844-AV-CM-INの取扱説明書

ページ1に含まれる内容の要旨

Form No. 2300
(Rev. 05/04)
Bryan “Flexible Water Tube”
TM
Water-Pak Indirect
Water Heater Systems
350,000 to 8,000,000 BTUH
Atmospheric Gas Fired and Forced Draft Gas, Oil or Dual Fuel Fired
335 to 3,533 Gallons Storage Capacity
Model CLM-120-WT-FDG-844-AV-CM-IN
Originators of the “Flexible Water Tube” design

ページ2に含まれる内容の要旨

TM Bryan Water-Pak brings packaged efficiency to large volume hot water needs TM The Bryan Water-Pak Indirect Water Heating System is a proven method of providing large volumes of hot water, with intermittent draws, for a variety of applications. Circulation Efficient between the tank and heat exchanger maintains the required temperature in the tank. Our years of experience in this field “Flexible have perfected the Bryan Indirect Water Heater. Water Simplicity of Indirect Heating The indirect h

ページ3に含まれる内容の要旨

Bryan Water-Pak “Indirect Storage Water Heating” is scale-free, corrosion-free and trouble-free This is the secret — Service hot water circulated continuously through the copper indirect heat exchanger, absorbing heat from warm Primary Water. Service hot water does not come in contact with hot flue gases; thus Insulated PVC tank jacket (optional) Heat transfer fluid (Primary it remains below critical scaling and corrosion Water) recirculated by thermal temperatures. action up through heater Hot

ページ4に含まれる内容の要旨

TM Bryan Water-Pak Indirect Water Heater Systems Selection Procedure Example Water-Pak Selection A requirement of 800 gph at 100° rise. Storage capacity 1000 Water-Pak units are built to furnish a very wide selection of gallons. Fuel, gas. Tank lining, cement. recovery rates, storage capacities and configurations. Both horizontal and vertical tanks are available to best fit into the 1. From "Heater Specifications" table, select Model No. CLM- space allocation. In addition to the combinations of