ページ1に含まれる内容の要旨
ENGLISH ESpAOL FRANAIS
See page 1 Vea la página 9 Consulter la page 17
ñ
ç
Owner’s Guide
fOr MOdel 90245
HUNTERS HIGH VELOCITY FAN
44806 04/02/2008
ページ2に含まれる内容の要旨
Important Safety Informat Ion r ead & Save These Instructions Ca ut Ion near an open flame, cooking or any other heating appliances. When using electrical appliances, basic precautions should always be 12. DO NOT use near curtains, taken to reduce the risk of fire, electric plants, window treatments, etc. shock and personal injury: 13. Never operate the fan if the 1. Read all instructions before using grills are not properly installed. this fan. Operating the fan without the grills co
ページ3に含まれる内容の要旨
ENGLISH WeC l ome u na p CkI ng Thank you for choosing a Hunter As you unpack the fan, save the carton Fan. This manual gives you complete and packing materials in case you want to instructions for using your fan. move or ship the unit in the future. Carefully remove all items from the box. Before using your fan, record the following information for your records and for NOTE: It is best to have someone hold warranty assistance. the box while you lift the fan and the protective packaging o
ページ4に含まれる内容の要旨
g round Ing In Stru Ct Ion S This appliance is for household use only LINE CORD SAFETY TIpS and may be plugged into any 120-volt 1. NEVER pull or yank on the cord or AC electrical outlet (ordinary household the appliance. current). DO NOT use any other type of 2. To insert plug, grasp it firmly and outlet. guide it into the outlet. 3. To disconnect the appliance, grasp WarnIng the plug and remove it from the This unit is suitable for outlet. grounded receptacle use only. 4. Before
ページ5に含まれる内容の要旨
ENGLISH aSSeymbl 1. Remove the 2 Pre-Installed Bolts [a] of the right end of the unit, with the included Allen Wrench [b]. The allen wrench is located inside the electrical box cover (see figure 3 below). [a] [b] [a] 2. Attach the Wheel Bracket Assembly [a] using the Longer Bolts [b] provided in the sack parts and tighten using the allen wrench provided. [b] [a] 3. Store the Allen Wrench [a] in the cover of the electrical box. This wrench can be used to adjust the tilt / swivel resist
ページ6に含まれる内容の要旨
o perat Ion ELECTRICAL BOX • Grounded • Circuit breaker protected with 7A overcurrent protection [a]. NOTE: If the breaker trips, unplug all cords and hit the reset button on the side of the box. [a] ADJUSTING TILT /SWIVEL RESISTANCE [a] 1. The cover of the electrical box holds the allen wrench needed for this operation (see page 5, step 3). 2. To adjust tilt resistance locate fasteners on both sides of the fans [b]. • To increase tilt resistance - turn clockwise. • To decrease tilt
ページ7に含まれる内容の要旨
ENGLISH Storage 1. ALWAYS store the fan in a dry place. 2. NEVER store the fan while it is still plugged in. 3. NEVER wrap the cord tightly around the fan. 4. DO NOT put any stress on the cord where it enters the fan, as it could cause the cord to break. maI ntenan Ce This fan is permanently lubricated and will not require additional lubrication (oil) for the life of the fan. This fan requires little maintenance and contains no user serviceable parts. DO NOT try to fix it yourself. Conta