ページ1に含まれる内容の要旨
For Your Records and Warranty
Assistance
Model Name: _____________________
Catalog/Model No.: ________________
Serial No.: _______________________
Date Purchased: ___________________
Where Purchased: _________________
For reference also attach your receipt or a
copy of your receipt to the manual.
42800-01 • 01/18/06
ページ2に含まれる内容の要旨
Welcome Your new Hunter ceiling fan is an addition to your home or office that ® will provide comfort and performance for many years. is installation and operation manual gives you complete instructions for installing and operating your fan. We are proud of our work. We appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world. Before installing your fan, for your records and warranty assistance, record information from the carton and Hunter namepla
ページ3に含まれる内容の要旨
Mounting and Optional Accessories Understanding Mounting Hunter’s patented mounting system provides you maximum ease in installing your fan. is fan was designed to be mounted only on flat ceilings and can be used on ceilings less than 8 feet high. Considering Optional Accessories LoL w Pr ow Pr ofil ofil e M e M ount ount ing in fi g t fi s c ts c losle t ose t o to t he he Consider using Hunter’s optional accessories, including a wall-mounted ceilin ceilin g. g, recommended for ceilings le
ページ4に含まれる内容の要旨
1 • Getting Ready To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: • Electric drill with 9/64” bit • Standard screwdriver (magne
ページ5に含まれる内容の要旨
2 • Installing the Hanger Bracket CAUTION: To avoid possible electrical shock, before installing your fan, Hanger disconnect the power by turning off the circuit breakers to the outlet box Bracket and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel. Canopy 2-1. Drill two pilot holes into the wood support structure through the Screw Step 2-2 outermost holes in the
ページ6に含まれる内容の要旨
3 • Assembling and Hanging the Fan Step 3-1 3-1. Position the square hanger so that the green ground wire attached to the square faces out of the large opening in the metal bracket. 3-2. Holding the wires out of the way, lift the motor assembly and place the square hanger into the opening in the ceiling plate. WARNING: Make sure the square hanger can not rotate in the metal bracket. Failure to do so could result in the fan falling. Square 3-3. Install two locking screws through the
ページ7に含まれる内容の要旨
4 •Wiring the Fan All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. 4-1. Disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. 4-2. To connect the wires, hold the bare metal leads together and place a wire nut over them, then twist clockwise until tight. CAUTION: Be sure no bare wire or wire strands are visible after ma
ページ8に含まれる内容の要旨
5 • Installing the Motor Housing Step 5-1 5-1. Place the fan housing over the motor. 5-2. Align the keyholes in the fan housing with the two partially Motor installed canopy screws in the hanger bracket. Rotate the fan housing to situate the screws in the narrow ends of the keyholes. Fan Housing 5-3. Install the two remaining canopy screws into the holes in the fan housing and into the hanger bracket. Securely tighten all screws. Step 5-3 8 9 Canopy Screw Hunter Fan Company 42800-01 • 0
ページ9に含まれる内容の要旨
6 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). Step 6-1 (Detail) 6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades. 6-2. Attach each blade to a blade iron using three blade assembly screws. If you used grommets, the blades may appear slightly loose after screws are tightened. is is normal. 6-3. Some blade mounting screws are installed in the motor to s
ページ10に含まれる内容の要旨
7 • Completing Your Installation With or Without a Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. is feature gives you the option of installing the fan with OR without the included light fixture. e steps below direct you whether or not you are installing a light fixture. WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the upper switch housing, partially install two housing
ページ11に含まれる内容の要旨
7-6. To attach the lower switch housing, connect the upper plug connector from the motor to the lower plug connector in the lower switch housing assembly. Note: Both plug connectors are polarized and will only fit together Plug one way. Make sure the connectors are properly aligned before Connector connecting them. Incorrect connection could cause improper operation and damage to the product. 7-7. Place the lower switch housing assembly over the upper switch Steps 7-6 – 7-7 housing. Al
ページ12に含まれる内容の要旨
7 • Completing Your Installation With or Without a Light Fixture (Continued) Uninstalling the Light Fixture 1. To uninstall the light fi xture, fi rst disconnect the plug connectors between the black wire and the black/white wire. Lower Switch 2. Disconnect the plug connectors between the two white Housing wires. 3. Uninstall the nut and washer from the end of the light fi xture inside the lower switch housing. 4. Unscrew the threaded rod of the light fi xture from the lower switch housing.
ページ13に含まれる内容の要旨
Installing the Glass Bowl 1. First install two medium base incandescent bulbs. 2. Attach the extra pull chain (included) to the fan pull chain using the plastic breakaway connector. (You may fi nd the plastic breakaway connector on the end of the extra chain.) 3. read the fan pull chain through the hole in the metal disk. en, thread the fan pull chain through the hole in the center of the glass bowl. 4. read the light pull chain through the hole in the center of the glass bowl. 5. Pla
ページ14に含まれる内容の要旨
8 • Operating and Cleaning Your Ceiling Fan 8-1. Turn on electrical power to the fan. 8-2. e fan pull chain controls power to the fan. e pull chain has four settings in sequence: High, Medium, Low and Off . • Pull the chain slowly to change settings. • Release slowly to prevent the chain from recoiling into the blades. • e chain uses a breakaway connector that separates if the chain is jerked. If this happens, simply reinsert the chain into the connector. 8-3. e light pull chain cont
ページ15に含まれる内容の要旨
9 • Troubleshooting Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker. 2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing. 4. Push motor reversing switch fi rmly left or right to ensure that the switch is engaged. 5. Pull the pull chain to ensure it is on. 6. Remove the shipping bumpers. Problem: Noisy operation. 1. Tighten the blade bracket screws until snug. 2. Tight
