ページ1に含まれる内容の要旨
English Español
For Your Records and
Warranty Assistance
T T Type 5 Models ype 5 Models ype 5 Models
For reference, also attach your receipt or a copy
of your receipt to the manual.
Owner’s Guide and Installation Manual
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 42786-01
20090814
©2009 Hunter Fan Co.
ページ2に含まれる内容の要旨
Welcome Your new Hunter ceiling fan is an addition to your home or office that ® will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We are proud of our work. We appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world. Before installing your fan, for your records and warranty assistance, record information from the carton and Hunter namepl
ページ3に含まれる内容の要旨
Installer’s Choice and Optional Accessories Understanding Mounting and Installer’s Choice® Support Brace Hunter’s patented 2-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of two ways, depending on ceiling height and your preference: Standard or Angled mounting. The steps in this manual include instructions for Ceiling Standard both Installer’s Choice mounting methods. Outlet Box Mounting Style Considering Optional Ac
ページ4に含まれる内容の要旨
1 • Getting Ready To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: • Electric drill with 9/64” bit • Standard screwdriver (magne
ページ5に含まれる内容の要旨
2 • Installing the Ceiling Plate CAUTION: To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel. 2-1. Drill two pilot holes into the wood support structure through the outermost holes in the outlet box. The pilot holes should be 9
ページ6に含まれる内容の要旨
3 • Assemblage et suspension du ventilateur 3 • Assembling and Hanging the Fan Steps 3-2 – 3-3 WARNING: Fan may fall if not assembled as directed in these installation instructions. 3-1. Unbundle the wires from the fan. Downrod For Standard or Angle mounting: 3-2. To assemble fan to hang down from a flat or angled ceiling, insert Canopy the downrod through the canopy. Feed the wires from the fan through the downrod. 3-3. Loosen the square head set screw on the adapter to install the
ページ7に含まれる内容の要旨
fsdfsdf 4 • Wiring the Fan All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70-1999. If you are unfamiliar with wiring, Wire use a qualified electrician. Connector Wall switches are not included. Select an acceptable general-use switch in accordance with national and local electrical codes. 4-1. Before attempting installation, make sure the power is still off. Dual Switch Wiring 4-2. To connect the wires, hold the bare metal leads together and place a
ページ8に含まれる内容の要旨
5 • Installing the Canopy Step 5-2 Ceiling Plate 5-1. Partially install two canopy screws into the ceiling plate and one time. 5-2. Holding the canopy, raise the fan off the hook. 5-3. Align the slots in the canopy with the already partially installed canopy screws on the ceiling plate. 5-4. Raise the canopy over the ceiling plate. Rotate the canopy Canopy clockwise until the canopy screws on the ceiling plate totally engage with the slots in the canopy. 5-5. Install the third canopy scr
ページ9に含まれる内容の要旨
6 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, Step 6-1 (Detail) insert them by hand into the holes on the blades. 6-2. Attach each blade to a blade iron using three blade assembly screws. If you used grommets, the blades may appear slightly loose after screws are tightened. This is normal. 6-3. Remove the blade mounting screws and rubber shipping bumper
ページ10に含まれる内容の要旨
7 • Completing Your Installation With a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly. WARNING: Use only the light fixture supplied with this fan model. The switch housing assembly is made up of three sections: the switch housing gasket, the upper switch housing, and the lower switch housing/ light assembly. Gasket Mounting ATTACHING THE SWITCH HOUSING GASKET Plate AND UPPER SWITCH HOUSING Upper Plug Step 7-1 7-1. Locate the switch housing mounting plat
ページ11に含まれる内容の要旨
7 • Completing Your Installation With a Bowl Light Fixture (Continued) ATTACHING THE UPPER SWITCH HOUSING 7-5. Locate the switch housing mounting screws in the sack parts. 7-6. Insert and tighten the screws into the outermost holes in the upper Switch switch housing. Housing Mounting CAUTION: Make sure the upper switch housing is securely Screws attached to the switch housing mounting plate. Failure to properly attach and tighten all four housing assembly screws could result in water
ページ12に含まれる内容の要旨
7 • Completing Your Installation With a Bowl Light Fixture (Continued) Installing the Glass Bowl 7-13. First install B10 candelabra bulbs (60 Watt Maximum) into the sockets. 7-14. Attach the extra pull chain (included) to the fan pull chain using the plastic breakaway connector. (You may find the plastic breakaway connector on the end of the extra chain.) 7-15. Thread the fan pull chain (coming from the side of the light kit) down through the closest hole in the metal disc. Then, thread t
ページ13に含まれる内容の要旨
8 • Operating and Cleaning Your Ceiling Fan 8-1. Turn on electrical power to the fan. 8-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low and Off. • Pull the chain slowly to change settings. • Release slowly to prevent the chain from recoiling into the blades. • The chain uses a breakaway connector that separates if the chain is jerked. If this happens, simply reinsert the chain into the connector. 8-3. The light pull chain contr
ページ14に含まれる内容の要旨
9 • Troubleshooting Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker. 2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing. 4. Pull the pull chain to ensure it is on. 5. Remove the shipping bumpers. Problem: Noisy operation. 1. Tighten the blade bracket screws until snug. 2. Check to see if the blade is cracked. If so, replace all the blades. Problem: Excessive wobblin
