ページ1に含まれる内容の要旨
For Your Records and Warranty
Assistance
Model Name: _____________________
Catalog/Model No.: ________________
Serial No.: _______________________
Date Purchased: ___________________
Where Purchased: _________________
For reference also attach your receipt or a
copy of your receipt to the manual.
42701-01 • 01/25/06
ページ2に含まれる内容の要旨
Welcome Your new Hunter ceiling fan is an addition to your home or office that ® will provide comfort and performance for many years. is installation and operation manual gives you complete instructions for installing and operating your fan. We are proud of our work. We appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world. Before installing your fan, for your records and warranty assistance, record information from the carton and Hunter namepla
ページ3に含まれる内容の要旨
Installer’s Choice and Optional Accessories Understanding Mounting and Installer’s Choice ® Hunter’s patented 3-position mounting system provides you maximum installation fl exibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profi le, Standard, or Angle mounting. e steps in this manual include instructions for all three Installer’s Choice mounting methods. Low Profi le Mounting fi ts close to the ceiling, recommen
ページ4に含まれる内容の要旨
1 • Getting Ready To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: • Electric drill with 9/64” bit • Standard screwdriver (magne
ページ5に含まれる内容の要旨
2 • Installing the Ceiling Plate CAUTION: To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel. 2-1. Drill two pilot holes into the wood support structure through the outermost holes in the outlet box. e pilot holes should be 9/
ページ6に含まれる内容の要旨
3 • Assembling and Hanging the Fan Steps 3-1 – 3-2 WARNING: Fan may fall if not assembled as directed in these installation instructions. Downrod 3-1. Unbundle the wires from the fan. For Standard or Angle mounting: 3-2. To assemble fan to hang down from a flat or angled ceiling, insert the downrod through the canopy. Feed the wires from the fan Canopy through the downrod. 3-3. Loosen the square head set screw on the adapter to install the pipe and ball assembly. Note: When the pipe
ページ7に含まれる内容の要旨
4 • Wiring the Fan All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Wire Nut Wall switches are not included. Select an acceptable general-use switch in accordance with national and local electrical codes. 4-1. Make sure the power to the outlet box and associated wall switch location is still OFF. To connect the wires, hold the bare metal leads together and place a wire nut over them,
ページ8に含まれる内容の要旨
5 • Installing the Canopy 5-1. Holding the canopy, raise the fan off the hook. 5-2. Align the holes in the canopy with the mounting holes on the ceiling plate. 5-3. Insert and tighten the mounting screws securely. Note: If necessary, lift the side of the gasket to insert the screws into Canopy the mounting holes on the ceiling plate. Steps 5-1– 5-3 Mounting Screw 8 9 Hunter Fan Company 42701-01 • 01/25/06 42701-01 • 01/25/06 Hunter Fan Company
ページ9に含まれる内容の要旨
6 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, Step 6-1 (Detail) insert them by hand into the holes on the blades. 6-2. Attach each blade to a blade iron using three blade assembly screws. If you used grommets, the blades may appear slightly loose after screws are tightened. is is normal. 6-3. Remove the blade mounting screws and rubber shipping bumpers
ページ10に含まれる内容の要旨
7 • Operating and Cleaning Your Ceiling Fan 7-1. Turn on electrical power to the fan. 7-2. Ceiling fans work best by blowing air downward (counterclockwise blade rotation) in warm weather to cool the room with a direct breeze. In cold weather, having the fan draw air upward (clockwise blade rotation) will distribute the warmer air trapped at the ceiling around the room without causing a draft. 7-3. For cleaning fi nishes, use a soft brush or lint-free cloth to prevent scratching. A vacuum
ページ11に含まれる内容の要旨
8 • Troubleshooting Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker. 2. Loosen canopy, check all connections according to the “Wiring the Fan” section. 3. Check the plug connection in the switch housing. 4. Push motor reversing switch fi rmly up or down to ensure that the switch is engaged. 5. Pull the pull chain to ensure it is on. 6. Remove the shipping bumpers. Problem: Noisy operation. 1. Tighten the blade bracket screws until snug. 2. Check
