ページ1に含まれる内容の要旨
English Español
For Your Records and
Warranty Assistance
T T Type 2 Models ype 2 Models ype 2 Models
For reference, also attach your receipt or a copy
of your receipt to the manual.
Owner’s Guide and Installation Manual
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 42688-01
20090508
©2009 Hunter Fan Co.
ページ2に含まれる内容の要旨
Welcome Your new Hunter ceiling fan is an addition to your home or office that ® will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We are proud of our work. We appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world. Before installing your fan, for your records and warranty assistance, record information from the carton and Hunter namepl
ページ3に含まれる内容の要旨
Installer’s Choice and Optional Accessories Understanding Mounting and Installer’s Choice® Support Brace Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angled mounting. The steps in this manual include Ceiling Standard instructions for all three Installer’s Choice mounting methods. Outlet Box Mounting Style Co
ページ4に含まれる内容の要旨
1 • Getting Ready To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: • Electric drill with 9/64” bit • Standard screwdriver (magne
ページ5に含まれる内容の要旨
2 • Installing the Ceiling Plate CAUTION: To avoid possible electrical shock, before installing your fan, Toward disconnect the power by turning off the circuit breakers to the outlet box Ceiling Peak and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel. 2-1. Drill two pilot holes into the wood support structure through the outermost holes in the outlet box. The pi
ページ6に含まれる内容の要旨
3 • Assembling and Hanging the Fan WARNING: Fan may fall if not assembled as directed in these Standard or Angled Mounting installation instructions. Steps 3-2 – 3-3 3-1. Unbundle the wires from the fan. Downrod For Standard or Angled mounting: 3-2. Insert the downrod through the canopy and canopy trim ring. Canopy Feed the wires from the fan through the downrod on one side of the pin in the ball. Canopy 3-3. Loosen the square head setscrew on the adapter to install the pipe Setscr
ページ7に含まれる内容の要旨
fsdfsdf 4 • Wiring the Fan All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Wire Connector Wall switches are not included. Select an acceptable general-use switch in accordance with national and local electrical codes. Go to Hardware Kit 4 4-1. Before attempting installation, make sure the power is still off. 4-2. To connect the wires, hold the bare metal leads together and place Dual
ページ8に含まれる内容の要旨
5 • Installing the Canopy and Canopy Trim Ring WARNING: Failure to complete the following steps could cause the fan Step 5-1 to fall. Note: It is recommended you use a magnetic tip screwdriver for the following steps. Tab Go to Hardware Kit 5 5-1. Rotate the hanger ball so the tab in the canopy is secure in the Groove hanger ball groove. Note: Your fan may have multiple tabs and grooves that must be aligned. 5-2. Swing the fan up to align the canopy screw holes with the Step 5-2 mountin
ページ9に含まれる内容の要旨
6 • Assembling the Blades Our exclusive Easy Lock™ blade assembly enables you to lock the blades in place without tools and to remove the blades easily for cleaning. 6-1. Open the locking mechanism. 6-2. Align the holes in the blade with the blade iron. 6-3. Close the locking mechanism securely. You will feel it lock into place. 6-4. Repeat steps 6-1 through 6-3 until all blades are installed. Open Step 6-1 Close Step 6-3 9 9 42688-01 • 05/08/09 • Hunter Fan Company
ページ10に含まれる内容の要旨
7 • Completing Your Installation With a Multi Staked Light Fixture Housing Upper Switch Assembly Screw Housing Go to Hardware Kit 7 WARNING: Use only the light fixture supplied with this fan model. 7-1 . To attach the lower switch housing assembly to the fan, partially Plug install two housing assembly screws into the upper switch Connector housing. 7-2. Connect the upper plug connector from the motor to the lower plug connector in the lower switch housing assembly. Note: Both plug
ページ11に含まれる内容の要旨
7 • Completing Your Installation With a Multi Staked Light Fixture (Continued) Note: Glass shade style and number of lights may vary. 7-6. To install each shade, first loosen the three thumbscrews. 7-7. Raise the shade to the light fixture. Tighten the thumbscrews securely. 7-8. Install B10 candelabra-based light bulbs (40 Watt maximum each). Shade Note: In compliance with US federal energy regulations, this Bulb ceiling fan contains a device that restricts the light kit to a Thumbscrews ma
ページ12に含まれる内容の要旨
8 • Operating and Cleaning Your Ceiling Fan 8-1. Turn on electrical power to the fan. 8-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low, and Off. • Pull the chain slowly to change settings. • Release slowly to prevent the chain from recoiling into the blades. • The chain uses a breakaway connector that separates if the chain is jerked. If this happens, simply reinsert the chain into the connector. 8-3. The light pull chain cont
ページ13に含まれる内容の要旨
9 • Troubleshooting Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker. 2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing. 4. Push motor reversing switch firmly left or right to ensure that the switch is engaged. 5. Pull the pull chain to ensure it is on. 6. Remove the shipping bumpers. Problem: Noisy operation. 1. Tighten the blade assembly screws and blade iron armat
