ページ1に含まれる内容の要旨
English Español
For Your Records and
Warranty Assistance
T T Type 3 Models ype 3 Models ype 3 Models
For reference, also attach your receipt or a copy
of your receipt to the manual.
Owner’s Guide and Installation Manual
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 42649-01
20090813
©2009 Hunter Fan Co.
ページ2に含まれる内容の要旨
Welcome Your new Hunter ceiling fan is an addition to your home or office that ® will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We are proud of our work. We appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world. Before installing your fan, for your records and warranty assistance, record information from the carton and Hunter namepl
ページ3に含まれる内容の要旨
Installer’s Choice and Optional Accessories Understanding Mounting and Installer’s Choice® Support Brace Hunter’s patented 2-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of two ways, depending on ceiling height and your preference: Standard or Angled mounting. The steps in this manual include instructions for Ceiling Standard both Installer’s Choice mounting methods. Outlet Box Mounting Style Considering Optional Ac
ページ4に含まれる内容の要旨
1 1 • • G Ge et tt ti in ng g R Re ea ad dy y To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: • Electric drill with 9/64” bi
ページ5に含まれる内容の要旨
2 • Installing the Ceiling Plate CAUTION: To avoid possible electrical shock, before installing your fan, Toward disconnect the power by turning off the circuit breakers to the outlet box Ceiling Peak and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel. 2-1. Drill two pilot holes into the wood support structure through the outermost holes in the outlet box. The pi
ページ6に含まれる内容の要旨
3 • Setting the Remote Transmitter and Receiver You must now set the jumpers in the remote transmitter and receiver Example Jumpers Settings so that they match. Receiver 1 Receiver 2 3-1. Change the position of the jumpers in the transmitter and the 4 3 2 1 4 3 2 1 receiver. Be sure the position of the jumper in the transmitter 4 3 2 1 4 3 2 1 matches the position of the jumper in the receiver. If they don’t match, the controller will not function. For instructions on how to set the jumpers
ページ7に含まれる内容の要旨
4 • Wiring the Fan Receiver All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Wall switches are not included. Select an acceptable general-use switch I A H in accordance with national and local electrical codes. 4-1. Before attempting installation, make sure the power is still off. B 4-2. Place the receiver inside the canopy, making sure that the G dipswitches and the oval shaped holes i
ページ8に含まれる内容の要旨
4 • Wiring the Fan (continued) 4-6. Using the large wire connectors, connect the fan and receiver to the power wires as follows: Large Wire Connector • Connect the black wire (ungrounded) from the receiver (marked on white tag “AC LIVE IN”) to the black wire (ungrounded) from the ceiling. • Connect the white wire (ungrounded) from the receiver (marked on white tag “AC NEUTRAL IN”) to the white wire (ungrounded) from the ceiling. CAUTION: Be sure no bare wire or wire strands are visible
ページ9に含まれる内容の要旨
5 • Installing the Canopy and Canopy Trim Ring WARNING: Failure to complete the following steps could cause the fan Step 5-1 to fall. Note: It is recommended you use a magnetic tip screwdriver for the following steps. Tab 5-1. Rotate the hanger ball so the tab in the canopy is secure in the hanger ball groove. Note: Your fan may have multiple tabs and Groove grooves that must be aligned. 5-2. Swing the fan up to align the canopy screw holes with the mounting holes on the ceiling plate.
ページ10に含まれる内容の要旨
6 • Assembling the Blades 6-1. Insert blade through housing before installing grommets in each blade. 6-2. Attach each blade to the fan using two blade assembly screws. Grommet Blade Assembly Screw 10 42649-01 • 08/13/09 • Hunter Fan Company
ページ11に含まれる内容の要旨
7 • Completing Your Installation With a Bowl Light Fixture Installing the Glass Bowl 7-1. Partially install two screws in the upper light kit. 7-2. Align the keyholes in the upper light kit ring with the partially installed screws and rotate to situate the screws in the narrow ends of the keyholes. Screws 7-3. Install the remaining screw into the upper light kit ring and securely tighten all three screws. 7-4. Install included 18W CFL bulb. 7-5. Align the tabs in the globe assembly with the
ページ12に含まれる内容の要旨
8 • Operating the Remote Control and Mounting the Holder Reversing Switch 8-1. The remote transmitter has individual buttons for turning the fan off and on and controlling the light and fan speed. 8-2. For best operation, start the fan by pressing high, then select your Fan Speed desired speed. High Fan Speed 8-3. The light button turns the light on to full brightness. Push the Medium Fan Speed light button again to turn off the light. Low Fan Off 8-4. The reversing switch reverses the
ページ13に含まれる内容の要旨
9 • Operating and Cleaning Your Ceiling Fan 9-1. Restore power at the main electrical panel and turn on the wall switch. The light kit should turn ON. Note: To turn on the light without the remote, turn off the wall switch for 5 seconds, then back on. The light kit will turn on at maximum brightness. 9-2. Press the remote control’s HIGH speed button. The fan should start and reach its maximum speed. Note: For everyday operation, leave the wall switch ON. If the remote control will
ページ14に含まれる内容の要旨
Hunter fans have the power to cut your cooling costs up to 40%. Beat the High Cost of Cooling The air movement created by a Hunter ceiling fan lets you set your thermostat higher and still stay comfortable. Every degree you raise the thermostat saves up to 7% on energy costs. So, you can cut back on expensive air conditioning...and save up to 40%* on cooling. In winter, your Hunter fan recirculates warm air and saves up to 10%* on heating bills. * On average at low speed settings. Your sa
ページ15に含まれる内容の要旨
10 • Troubleshooting Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker. 2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing. 4. Push motor reversing switch firmly left or right to ensure that the switch is engaged. 5. Pull the pull chain to ensure it is on. 6. Remove the shipping bumpers. Problem: Noisy operation. 1. Tighten the blade assembly screws and blade iron arma
