ページ1に含まれる内容の要旨
TSD ■ Service Manual
P526 Service Manual
1
ページ2に含まれる内容の要旨
TSD ■ Service Manual 1 ．Equipments required NO# Equipment ASUS Part# Supplier Quantity Remarks Description 1 Computer None None 1 2 SIM Card None None 1 3 P526 80A-S5C1004 ASUS 1 4 Battery 07G016043459 ASUS 1 Mini USB 5 14G000506200 ASUS 1 cable Screwdriver 6 16-T00362002 ASUS 1 (T5) 7 Tweezers 16-000600014 ASUS 1 Plastic 8 13GV0400PZZZ ASUS 1 Wrench Micro SD 9 04G352700210 ASUS 1 Card 10 ADAPTER 04G267013820 ASUS 1 2
ページ3に含まれる内容の要旨
TSD ■ Service Manual 2. Disassembly / Assembly Procedure 2.1 Introduction This section describes how to disassemble P526 telephone. Many of the integrated devices used in this phone are vulnerable to damage. Ensure adequate static protection is in place when handling, shipping, and servicing any internal components. 2.2 Recommended Tools Anti-Static Mat (Ground Cord included) Anti-Static Wrist Strap Torque Scre
ページ4に含まれる内容の要旨
TSD ■ Service Manual 2.3 Disassembly Procedure The following set of diagrams will demonstrate the correct sequence and action to disassemble P526. 1. Remove the Stylus 2. Remove Battery cover 3. Remove Battery 4
ページ5に含まれる内容の要旨
TSD ■ Service Manual 4. Remove the ANTENNA Cover 5. Remove 4 SCREWS M1.6*4L T5 6. Disassemble FRONT COVER ASS'Y and MIDDLE COVER ASS'Y by Plastic Wrench 5
ページ6に含まれる内容の要旨
TSD ■ Service Manual 7. Remove VIBRATOR and SPEAKER from MIDDLE COVER ASS'Y 8. Remove Main Board from FRONT COVER ASS'Y 6
ページ7に含まれる内容の要旨
TSD ■ Service Manual 9. Remove LCD TFT, KEYPAD and 4 GASKETS from FRONT COVER ASS'Y 10. Remove RECEIVER from FRONT COVER ASS'Y 7
ページ8に含まれる内容の要旨
TSD ■ Service Manual 2.4 Assembly Procedure It is carried out in the exact reverse sequence as the disassembly. 1. Assemble FRONT COVER ASS'Y: Put RECEIVER in FRONT COVER ASS'Y 2. Assemble LCD module 3 ．Put Keypad in FRONT COVER ASS'Y 8
ページ9に含まれる内容の要旨
TSD ■ Service Manual 4. Assemble FRONT COVER ASS'Y and Main Board 5 ．Connect the LCM Module 6. Assemble MIDDLE COVER ASS'Y ：Put VARISTOR in MIDDLE COVER ASS'Y 9
ページ10に含まれる内容の要旨
TSD ■ Service Manual 7 ．Put OK KEY MIDDLE COVER ASS'Y 8 ．Put CAMERA KEY in MIDDLE COVER ASS'Y 9 ．Put POWER KEY in MIDDLE COVER ASS'Y 10 ．Assemble MIDDLE COVER ASS'Y and MIDDLE COVER ASS'Y 10
ページ11に含まれる内容の要旨
TSD ■ Service Manual 11 ．Put on 4 SCREWS M1.6*4L T5 12 ．Put on Battery 13 ．Put on Battery Cover 11
ページ12に含まれる内容の要旨
TSD ■ Service Manual 14. Assemble Styluses ：Put in Stylus 12
